Product outline
Features
■ Torque monitor for UTMⅡ/UTMV.
■ With the built-in battery, it can be operated even without power source.
■ Ideal for use with UTMⅡ (square shaft) series with the high-speed sampling at 20kS/s.
■ Easy connection to UTMⅡ/UTMV with one cable.
■ Operation power can be supplied to the UTMⅡ/UTMV (and also to an optional rotary encoder).
■ Torque & rotation speed and torque-angle curve can be monitored.
■ Data recording with memory function and USB.
■ Various display mode: real-time, graph, recorded data, etc….
■ Upper/lower limit & hold function.
Change the display mode by pressing the ESC button
External dimension
Specifications
Torque input|Input for rotation speed|Encoder input|Display section|Interface|General specifications|Attachments
Torque input (voltage input) | |
Signal input range | -5 to +5V Input impedance:1MΩ or more |
---|---|
Accuracy |
Non-linearity : within 0.02%FS±1digit Zero drift : within 0.2mV/℃ RTI Gain drift : within 0.01%/℃ |
Analog filter | Low pass filter (-6dB/oct.) Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz |
A/D converter |
・ Rate : 20000times/sec ・ Resolution : 24bit (binary) Approx. 1/30000 against 5V |
Input for rotation speed (open-collector pulse) | |
Maximum input frequency | In accordance with the output frequency of the UTMⅡ/UTMV series |
---|---|
Minimum input frequency | 15rpm |
Minimum detection pulse width | 50μs |
Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic=Approx. 10mA) |
Encoder input (open-collector pulse) | |
Maximum input frequency | 50kHz |
---|
Display section | |
Display unit | 128×64 dots monochromatic LCD (display area: 28 x 57) |
---|---|
Displayed data |
Torque, rotation speed, Angle (numeric) Torque-time or torque-angle/displacement curve (graphic) Status display (high, low, OK, and hold) |
Interface | |
Interface | USB |
---|
General specifications | |
Power supply |
Built-in secondary battery Maximum operating time: 5 hours AC adopter |
---|---|
Operating conditions |
Operation temperature : -10 to +40℃, storage temperature : -20 to +60℃ Humidity : 85%RH or below (non-condensing) |
Dimensions | 88(W)× 140(H)× 35(D)mm (excluding projections) |
Weight | Approx. 500g |
CE marking certification |
EMC directives EN61326-1 Safety standard EN62311 Please specify requirement for CE marking certified product when making your order. |
Attachments | |
AC adopter・・・・・・1 Operation manual・・・・・・1 Cable for UTMⅡ/UTMV connection (2m)・・・・・・1 Cable for UTMⅡ rotary encoder connection (2m)・・・・・・1 |
Optional accessories
Model | Description |
CA81-USB | miniUSB-computer USB cable 1.8m |
---|---|
CATM21-M | 2m cable for connecting UTMⅡ/UTMV |
CATM51-M | 5m cable for connecting UTMⅡ/UTMV |
CATM(R)21 | 2m cable for UTMⅡwith rotary encoder connection (non-connector at one end) |
CATM(R)21-M | 2m cable for connecting UTMⅡrotary encoder |
CATM(R)51-M | 5m cable for connecting UTMⅡrotary encoder |
CN90 | Waterproof plastic connector for UTMⅡ/UTMV |
CN91 | Waterproof plastic connector for UTMⅡ rotary encoder |
TM400 AC CABLE EU | AC cable(For Europe) |
Download
Product catalogue(PDF)
|
TM400 catalogue(479 KB) |
---|
咨询 - TM400