★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Aluminum Alloy
Model No. |
AZL100-A2PR-CD |
|||
Mechanical Spec. |
Table Size (mm) |
100 X 100 |
||
Travel Stroke (mm) |
40 |
|||
Drive Type |
Ball screw Ø8, lead 1mm |
|||
Rail |
Anti-creep Crossed-roller Guiding |
|||
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized |
|||
Main Unit Weight (Kg) |
2.67 | |||
Coupling |
FAMMS16-5*5 |
|||
Accuracy Level |
P:Precision grade |
|||
Wiring Method |
R:Right Wiring / L:Left Wiring |
|||
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) |
1 (Half) |
|
Max. Speed (Full Step) (mm / sec) |
10 |
|||
Positioning Presion (µm) |
5 |
|||
Repeatability Precision (µm) |
± 0.5 |
|||
Load Capacity (Kgf) |
12 |
|||
Missed Step (µm) |
1 |
|||
Parallelism (µm) |
20 |
|||
Dynamic Straightness (µm) |
2 |
|||
Dynamic Parallelism (µm) |
10 |
|||
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 42 double shafts |
|
Brand / Model |
SANYO / 103F5510-8211 |
|||
Driver Brand / Model |
Please refer to reference table |
|||
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||
Limit Sensor |
||||
Origin Approximation Sensor |
Photoelectric sensor PM-F24 |
|||
Power Voltage |
24V ± 10% |
|||
Control Output |
NPN open collector output under 24V 8mA |
|||
Output Control |
Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |
|
咨询 - AZL100 - Precision