★Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★Material-Aluminum Alloy
Model No. |
AX40-A2OP |
|||
Mechanical Spec. |
Table Size (mm) |
40X40 |
||
Travel Stroke (mm) |
15 |
|||
Drive Type |
Ball Screw Ø6,lead 1mm |
|||
Rail |
Crossed-roller Bearing |
|||
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized |
|||
Main Unit Weight (Kgs) |
0.37 |
|||
Coupling |
FAMMS12-3*5 |
|||
Accuracy Level |
OP:Ultra Precision |
|||
Wiring Method |
R : Right wiring (Standard);L : Left wiring |
|||
Precision Spec. |
Resolution(Pulse) (µm) |
M: 2.5 (Full);1.25 (Half) J: 5 (Full);2.5 (Half) |
||
Max. Speed(Full Step) (mm/sec) |
10 |
|||
Positioning Precision (µm) |
5 |
|||
Repeatability Precision(µm) |
±0.3 |
|||
Load Capacity (Kgf) |
6 |
|||
Missed Step (µm) |
1 |
|||
Moment Stiffness |
Pitch: 0.35 / Yaw: 0.45 / Rolling: 0.4 ("/N-cm) |
|||
Pitch / Yaw |
Pitch: < 25" / Yaw: < 20" |
|||
Parallelism (µm) |
30 |
|||
Dynamic Straightness (µm) |
3 |
|||
Dynamic Parallelism (µm) |
6.6 |
|||
Electrical Spec. |
Motor |
Type / Shaft Numbers |
M: 5-phase stepper high-resolution motor / ☐28 double shafts J: 5-phase stepper motor / ☐28 double shafts |
|
Brand / Model |
M: Orientalmotor / PK523HPMB J: Orientalmotor / PKP523N12B |
|||
Driver Brand / Model |
Orientalmotor / CVD Series - 5 Phase stepping motor (Additional options) |
|||
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||
Controller Side Connector |
15-Pin female end connetor D-SUB (Additional options) / 12-Pin female end connetor HRS (Additional options) |
|||
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||
Limit Sensor |
||||
Power Voltage |
24V±10% |
|||
Control Output |
NPN open collector output under 24V 8mA |
|||
Output Control |
Testing (sensing):output transistor OFF (closed) |
Multi-point repeated positioning accuracy |
♦ Accuracy measurement description 1. Unidirectional positioning accuracy: within the range of the predetermined detection stroke, starting from a starting position, moving and positioning in a certain direction sequentially, and detecting the actual ♦ Precision introduction 1. Design the GMT high-level precision inspection method to meet the precision requirements of fiber coupling and semiconductor manufacturing process. |
System Configuration Diagram |
♦ For detailed specifications, please read the description for the stage and connecting cable. ♦ For selection of driver, please refer to the cross-reference table for the motor/driver of the standard motorized stage or the GMT motor and driver catalog. ♦ The most preferred driver is recommended to be specified by GMT as considerations. For different needs, please choose the suitable driver based on real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor/driver |
咨询 - AX40 - Ultra Precision