Dual axes-XX axis
Lower axis coarse tuning / Upper axis fine tuning
Table size : 40x50 (mm)
★ Guide- Dovetail type.
★ Transmission parts- Rack and pinion+feeding screw.
★ Material-Aluminum Alloy
Model no. | MC7G-4050C | MC7G-4050F | |
Table size (mm) | 40*50 | 40*50 | |
Fine Tuning | Movement Per Knob Cycle (mm) | 0.5 | 0.25 |
Knob Mini. Reading | 0.01/div. | 0.005/div. | |
Travel Stroke (mm) | ±17.5 | ±17.5 | |
Coarse Adjustment | Movement Per Knob Cycle | ≒18 | ≒18 |
Vernier (kg) Finish Minimum Reading | 0.1 mm/Vernier | 0.1 mm/Vernier | |
Travel Stroke (mm) | ±30 | ±30 | |
Loading (kgf) | 4 | 4 | |
Weight (kg) | 0.5 | 0.5 |
The Main Feeding Mode of Mini Stages | |||
Main Feeding Mode | Characteristics | A Crcle Movement of Handle Rotation | Applied for Guiding Device |
●Suitable for high speed mass feed. ●Not suitable for precise positioning.
|
17~20 mm | ● Dovetail | |
Feeding Screw
|
● Use precise threadscrew pitch to proceed simple precise moving. |
0.25~1 mm |
● Dovetail ● Crossed roller ●Linear ball bearing |
Micrometer Head |
● Precise Reading Unit: 0.01mm is suitable for precise tuning. | 0.5 mm |
●Dovetail ● Crossed roller ● Linear ball bearing |
● Divided into rough moving (general feeding) and slight moving (micro feeding) use. ● It’s a special feeding device and a bit costly. ● Differential motion structure for slightly transmission. |
Coarse tuning:0.5 mm Fine tuning:0.025mm |
●Linear ball bearing ● Crossed roller |
Feeding Position |
|
咨询 - MC7G (Special Specification)