Login

iMS Motionet Sdn Bhd
26, Jalan IKS Simpang Empat,
Taman IKS Simpang Empat,
14100 Simpang Ampat,
Penang, Malaysia.
+604-5026180
Hotline: 1700 81 8880
+604-5025180
+60164015718

FC400-CCL( CC-LINK)

Previous 22 / 24 Next

FC400-CCL( CC-LINK) Weighing Indicator Unipulse
RM 0.00
In Stock


FC400-CCL

DIN-rail mount weighing indicator with CC-Link interface
 

Product outline

Equipped as standard with CC-Link interface!!
Light & compact body for DIN rail mounting.

 

FC400-CCL is a weighing indicator equipped as standard with CC-Link interface. It is ideal for a variety of weighing applications like hopper scales, bagging machines, and level meters.
Network with multiple units can be configured easily.

 

Lightweight and compact body to fit into limited space in a control panel

DIN-rail mountable
Dimensions: 34(W)×88(H)×91(D)mm (Projections excluded)
Weight: Approx. 210g

FC400 Lightweight and compact body to fit into limited space in a control panel

 

Various interfaces

Equipped with CC-link, RS-485, and USB interface!

FC400 Various interfaces
 

High sampling rate & resolution

High-Speed A/D conversion and powerful digital processing capability of 1200 times/sec..
High display resolution of 1/100000 (max).

FC400 High sampling rate & resolution

Measurement can be performed quickly and precisely due to high speed A/D conversion.

 

Various functions useful for automated weighing systems

High performance filter
As it is resistant to vibration, measurement can be performed quickly and precisely.

 

Equivalent input calibration
Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.

 

Multipoint calibration (linearization)
Three additional points can be defined in the middle between zero and span for better linearity.

 

Basic weighing process control function
Sequential control can be performed without connecting external PLC etc.
 

 

 

 

 

Specifications

Analog
Excitation voltage DC5V±5% Output current: 90mA
Ratiometric method (Up to 6 350Ω load cells can be connected in parallel
Signal input range 2.5 to 5.1mV/V
Zero adjustment range Automatic adjustment by digital processing -0.5 to 2.0mV/V
Span adjustment range

Automatic adjustment by digital processing 0.02 to 3.0mV/V

Gain correction Up to three point multi-point calibration is possible using linearization function
Min. input sensitivity 0.15μV/count
Accuracy Non-linearity: within 0.01%FS
Zero drift: 0.0002%FS/ Typ
Gain drift: 1ppm/ Typ
Filter Digital low-pass filter: 0.1 to 300 Hz
Moving average filter: OFF, 2 to 512 times
A/D converter Speed: 1200 times/sec.
Resolution: 24bit binary
 
Display
Display unit Character height 8mm, Numerical display by 7-segment green LED
Display value Up to 6 digits
Display frequency Selectable from 3, 6, 13, 25 times/sec.
Status display RUN, SD, RD, ERR
 
External signal
Output signal
(5 points)
Selectable/configurable
Transistor’s open collector output
Vceo=30V, Ic=50mA
Input signal
(3 points)
Selectable/configurable
Input is ON when shorted to COM terminal by contact (relay switch, etc.)
or non contact (transistor, open collector, etc.).
* DC24V external power supply is required.
 
Interface
USB USB interface
485 RS-485 interface (Selectable from Modbus-RTU or UNI-Format)
CCL CC-Link interface
 
General specification
Power supply voltage DC24V (±15%)
Power consumption 3W typ
Operating conditions Temperature: Operating temperature range: -10 to 50, torage temperature range: 20 to 85
Humidity: 85%RH or less (non-condensing)
Dimensions 34(W)×88(H)×91(D) mm (Projections excluded)
Weight Approx. 210g
 
Attachment
Jumper cable 2
Mini driver 1
CC-Link connector 1
Various I/O connector 2
Quick manual 2
 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Our Agency Product Brands

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start