Login

iMS Motionet Sdn Bhd
26, Jalan IKS Simpang Empat,
Taman IKS Simpang Empat,
14100 Simpang Ampat,
Penang, Malaysia.
+604-5026180
Hotline: 1700 81 8880
+604-5025180
+60164015718

F741

Previous 1 / 24 Next

F741 Weighing Indicator Unipulse
RM 0.00
In Stock


F741

Desktop Type Loadcell Indicator
 

Product outline

F741 is an indicator excellent in cost effectiveness that the most important features include for field operation.

 

F741 is a desktop type loadcell indicator that can be used for any type of platform scale. The most important features include field operability such as a large display tube, which is easy to read even in harsh environments, and maneuverable one-touch function keys. With the counting function to display the parts quantity, the HI/LO limit comparison function conveniently used for checkers, and the multi-interval function, F741 is an indicator excellent in cost effectiveness.
The series device (F741R2) equipped with RS-232C communication interface is also provided.

 

 
 
 

Specifications

ANALOG SECTION
Excitation voltage 10V DC ±5%, Output current; within 120mA, Ratiometric method (Up to 4 loadcells at 350Ω are parallel-connectable.)
Zero adjustment range ±2mV/V
Gain adjustment range 0.5 - 3.0mV/V
Min. input sensitivity 0.5μV / count
Accuracy
  • Non-linearity: within 0.01% FS
    Zero drift: within 0.2μV/°C RTI
    Gain drift: within 15 ppm/°C
    Noise: within 0.3μVp-p RTI
A/D converter Speed: 50 times/sec
Resolution: 16 bit (binary)
Min. display resolution 1/10000
 
SETTING SECTION
Setting method Keyboard operation (membrane switch with a key click buzzer)
Setting value storage NOV RAM (Non-volatile RAM)
Setting items Tare setting, unit weight setting, near zero, high limit, Low limit, digital filter, motion detect, zero tracking, comparison setting, auto printing, counting mode select, external terminal change, balance weight value, capacity, min. scale division, zero regulation value, decimal place, count of display, gravitational acceleration, RS-232C setting, function inhibit key, setting value LOCK, quantity setting, interval border, measurement law-NTEP compliance
 
INPUT/OUTPUT SECTION
External input signal Tare subtraction, tare subtraction reset, zero, gross/net weight change, printing 
ON when shorted to COM terminal by contact (relay, switch) or non contact (transistor, open collector)
External output signal Transistor’s open collector output (Output is LO when transistor is ON) 
HI: Net weight>high limit set value, GO: Low limit set value <= net weight <= high limit set value, LO: Net weight < Low limit set value
Interface ・ 2-wire type serial interface (SI/F standard)
・ RS-232C communication interface (F741R2 only)
 
DISPLAY SECTION
Display unit 7 digits (fluorescent display tube), Character height; 18 mm
Display value 5 digits -88.8.8.8, Minus sign displayed on most significant digit
Scale capacity 5-digit numerical values
Min. scale division 1 to 100
Decimal point Selectable decimal place at 0/0.0/0.00/0.000
Center zero True zero point or the center of each value is displayed.
Unit display Selectable from t, kg, g, N, lb, none (weight), pcs (quantity)
Quantity display 4 digits (Unit: pcs)
Status display CENTER ZERO, STAB, TARE, NET, GROSS, LOCK, ZT, ZALM, HI, GO, LO, HOLD, NZ
Over-scale display Input of A/D converter overflow, Net weight over the set net value, scale capacity + 9 scale divisions, Gross weight over the set gross weight
 
GENERAL SPECIFICATIONS
Power supply voltage 85 - 110V, 102 - 132V, 170 - 220V, 187 - 242V AC (Please specify when ordering), 50/60 Hz
Power consumption Approx. 15VA
Operating conditions Temperature: Working temperature range -10°C - +40°C
Humidity: 85% RH or less (non-condensing)
External dimensions 210 (W) x 165 (H) x 95 (D) [mm] (protruding parts not included)
Weight Approx. 1.4 kg
 
ACCESSORIES
AC input cord (3 m) 1
Spare fuse (1A) 1
Loadcell connector 1
Crimping terminal 12
Nameplate seal 1
Operation Manual 1
 
 

Option

Model Description
F741R2 F741 with RS-232C
 
 

Optional accessories

Model Description
CAAC2P-B3 AC input cord 3 m
CAAC3P-CEE7/7-B2 AC input cord (withstand voltage: 250V) 2 m
CA573Y31 57/14p (6-core) cable (cable end is separated) 3 m
CA574030 57/14p-PRC (6-core) cable 0.3 m
CN20 Loadcell connector (57 series 14p)
CN33 D-Sub 9p connector for RS-232
 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Our Agency Product Brands

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start