UTMIII (C)(RC)

Quantity: In Stock

New installation option of UTMⅢ!
New type for firm usage & fix torque meter!

●Wants center point of axis as reference for installation
●Wants to stop vibration & fix main unit
●Other reasons that require to fix main unit

utm3_r

0.05Nm～10Nm
Measurement range Nm	0.05	0.1	0.2	0.5	1	2	5	10
Consumption current	100mA or less
Max. rotation speed	25000rpm
Torsional spring constant Ｎｍ/rad	5.67	11.57	26.10	93.1	188	414	691	1851
Maximum torsional angle rad	8.81× 10-³（0.505°）	8.64× 10-³（0.495°）	7.66× 10-³ （0.439°）	5.37× 10-³ （0.308°）	5.32× 10-³（0.305°）	4.83× 10-³（0.277°）	7.24× 10-³（0.415°）	5.40× 10-³（0.310°）
Inertia moment(C) kgm2	8.48×10-7	8.58×10-7	8.7×10-7	1.46×10-6	1.49×10-6	1.39×10-6	3.56×10-6	3.66×10-6
Inertia moment(RC) kgm2	1.39×10-6	1.40×10-6	1.41×10-6	1.92×10-6	1.95×10-6	1.85×10-6	4.26×10-6	4.36×10-6
Ext. dimension(C) (case size) mm	54W× 49H× 32D						57W× 54H× 37D
Ext. dimension(RC) (case size) mm	73W× 49H× 32D						76W× 54H× 37D
Total length(C) mm	74			84			97
Total length(RC) mm	93			103			116
Shaft diameter mm	5			8			12
Approx. weight(C)	150g			170g			260g
Approx. weight(RC)	190g			210g			320g

20Nm～500Nm
Measurement range Nm	20	50	100	200	500
Consumption current	150mA or less
Max. rotation speed	20000rpm		15000rpm	12000rpm	10000rpm
Torsional spring constant Nm/rad	5386	8428	17.3× 10³	41.7× 10³	117× 10³
Maximum torsional angle rad	3.71× 10-³（0.213°）	5.93× 10-³（0.340°）	5.78× 10-³（0.331°）	4.79× 10-³（0.275°）	4.28× 10-³（0.246°）
Inertia moment(C) kgm2	2.59×10-5	2.66×10-5	6.59×10-5	1.40×10-4	4.70×10-4
Inertia moment(RC) kgm2	2.86×10-5	2.93×10-5	7.56×10-5	1.56×10-4	5.12×10-4
Ext. dimension(C) (case size) mm	70W× 63H× 47D		67W× 63.5H× 56D	67W× 68H× 61D	67W× 78H× 71D
Ext. dimension(RC) (case size) mm	87W× 63H× 47D		84W× 63.5H× 56D	84W× 68H× 61D	84W× 78H× 71D
Total length(C) mm	150	170	177	187	217
Total length(RC) mm	167	187	194	204	234
Shaft diameter mm	20		25	30	40
Approx. weight(C)	690g		1.07kg	1.46kg	2.57kg
Approx. weight(RC)	770g		1.19kg	1.61kg	2.84kg

Common specifications
Power supply	DC24V ±15％
Output range	±10V DC　Load resistance must be more than 5kΩ
Responsivity	5kHz
Rotation signal	4 pulses per 1 rotation Open collector Max. ratings 30V, 10mA
Digital filter	1Hz~1kHz(Depending on settings) PASS 5kHz
Safe overload	500%FS
Non-linearity	0.03%FS
Hysteresis	0.03%FS
Repeatability	0.03%FS
Operation temp . range	－10 to ＋50℃
Temp. effect on ZERO	0.01%FS/℃
Temp. effect on span	0.01%FS/℃
Supplied cable	12-core shielded cable(2m), cable end separated （Cable length is switchable to 5m（Option：UTMⅢ-L5））
CE marking certification	EMC directives EN61326-1,EN61326-2-3