UTF-500NM

Category: Torque Meter

Quantity: In Stock

Description

Product outline

High torsional stiffness(17000kNm/rad), 500% of safe overload
UTF is a flange type torque meter.
With high torsional stiffness, it can detect high-frequency torque fluctuation.
Due to the high save overload, it is also possible to work steadily with severe load for a long time.
It is suitable for testing automobile parts such as driving motors, generators, and decelerators.

New flange type torque meter from UNIPULSE of rotating torque meter

● High torsional stiffness(17000kNm/rad)
● 500% of safe overload
● 500Nm full scale
● Max speed of 20,000rpm
● Dynamic balance grade G2.5
● Built-in digital low pass filter
● RPM pulse output
● Unique signal transmission strong against grease and stain
● ±10V torque output

Installation example of motor testing bench in dynamometer

Specifications

Flange part｜Receiver｜Option｜Accessories

Flange part
Receiver	Strain gauge type
Measurement range	500Nm
Safe overload	500%FS（2500Nm）
Sampling rate	20kHz
Cut-off frequency	3kHz
Digital low pass filter	1Hz～1kHz(Changes by setting)、PASS 3kHz
Non-linearity	0.03%FS
Hysteresis	0.03%FS
Repeatability	0.03%FS
Compensated temperature range	-10～50℃
Temperature effect on zero	0.01%FS/℃
Temperature effect on span	0.01%FS/℃
Max. rotation speed	20000rpm
Torsional spring constant	1700kNm／rad
Maximum torsional angle	2.93×10-4(0.017°)
Inertia moment	5.0×10-3kgm2
Gear for detecting rpm	90 cogs/round
Dimensions	φ138×51（D）mm
Weight	2.3kg

Receiver
Analog output	CH1:±10V torque output (Load resistance must be more than 5kΩ) CH2:±10V rotation output (Load resistance must be more than 5kΩ)
Pulse output	Detection method: Magnetic detection Signal specification: 90°phase differences AB phases pulses (RS-422A standard driver) Number of pulses: 90 pulses/rotation
Digital I/O	Number of I/O: (3) INPUT for changing setting, (1) OUTPUT for error Input type: Volt-free contact, open collector or TTL level Output type: Open collector DC30V 50mA
Interface	RS-485（115.2kbps）
Compensated temperature range	-10～50℃
Power supply voltage, Power consumption	DC24V ±10%、17W typ.
Dimensions	210（W）×66.5（H）×60（D）mm(Projections excluded)
Weight	1.1kg

Option
Frequency output (Model: UTF-500Nm(FM))	Torque output: 60kHz±30kHz
Number of pulses (Model: UTF-500Nm(IP))	1080 pulses/rotation

Attachment
Power supply cable	1
Analog output cable	1
Communication cable	1
I/O cable	1
Position confirmation attchment	1
Operation manual	1

Accessories
CATF-PWR-5M	Power supply cable for UTF 5m
CATF-OUT-5M	Analog output cable for UTF 5m
CATF-COM-5M	Communication cable for UTF 5m
CATF-I/O-5M	I/O cable for UTF 5m
CATF-SET-5M	Cable sets (power, analog output, communication, I/O)