FC400-DAC
Product outline
D/A converter is equipped as a standard feature for the analogue output!!
Lightweight & compact body - DIN rail mountable!
FC400-DAC is a compact weighing Indicator with D/A converter.
It is suitable for many weighing applications such as hopper scale, packing scale, weight level meter, etc….
Either voltage or current output, corresponding to the indicated value, is available.
It can be fit into a limited space!
Light weight & compact body for 35mm DIN rail mount.
External dimension: 34(W)×88(H)×91(D)mm (not including projection).
Weight: Approx. 210g.
Various interface
Equipped as standard with D/A converter, RS-485 , and USB interface.
High-speed sampling & high resolution
High-speed A/D conversion rate at 1200 times/sec.
& high display resolution capability of 1/100000.
The high-speed A/D converter enables the faster and more accurate weighing.
Various features
■ High-performance filter:
With the powerful filter against noise, high-speed an high-accuracy weighing can be achieved.
■ Auto filter adjustment:
The filter is automatically adjusted to reduce the noise when the auto adjustment key is pressed.
■ Equivalent input calibration:
Theoretical calibration can be performed easily by registering the capacity and rated output of the load cell(s).
■ Multipoint calibration (linearization):
Three additional points can be defined in the middle between zero and span to improve the linearity.
■ Input conversion value display :
The output signal level of the connected load cell can be displayed in mV/V/ for monitor purpose.
■ Basic weighing process control function:
Sequential control can be performed without external devices like PLC.
Specifications
Analog section|Display|External signal|Interface|General specifications|Attachments
Analog section | |
Excitation voltage |
DC5V±5% Output current: 90mA Ratiometric method (up to six 350Ω load cells can be connected in parallel) |
---|---|
Signal input range | -2.5~5.1mV/V |
Zero adjustment range |
Automatic adjustment by digital processing: -0.5 to 2.0mV/V |
Gain adjustment range | Automatic adjustment by digital processing: 0.02 to 3.0mV/V |
Gain correction | Multipoint calibration function: Up to three additional points between zero and span points can be defined. |
Minimum input sensitivity | 0.15μV/count |
Accuracy |
Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/℃ Typ Gain drift: 1ppm/℃ Typ |
Filter |
Digital low-pass filter: 0.1 to 300 Hz Moving average filter: OFF, 2 to 512 times |
A/D converter |
Rate: 1200 times/sec Resolution: 24 bit(binary) |
Display | |
Display unit | 8mm character height, 7-segment green LED numeric display |
---|---|
Indicated value | Max. 6 digits |
Refresh rate | selectable from 3, 6, 13, or 25 times/sec. |
External signal | |
External output : 5 |
Selectable outputs. Transistor open collector output. Vceo=30V,Ic=50mA |
---|---|
External input: 3 |
Selectable inputs. Either contact type (relay, switch etc.) or non-contact type (transistor, photocoupler etc.. ) can be connected. ON when short-circuited with COM. *The external power supply (DC24V) needs to be prepared by user. |
Interface | |
USB | USB interface |
---|---|
485 | RS-485 communication interface (select either Modbus-RTU or UNI format) |
DAC | D/A converter (select either voltage or current output) |
General specifications | |
Operating voltage | DC24V(±15%) |
---|---|
Power consumption | 3W typ |
Operation condition |
Temperature: Operating temperature range: -10℃ to +50℃. Storage temperature range: -20℃ to +85℃. Humidity: 85%RH or less (non-condensing) |
External dimension | 34(W)×88(H)×91(D)mm (not including protrusions) |
Weight | Approx. 210g |
Attachments | |
Jumper wire | 2 |
---|---|
Mini driver | 1 |
Connectors | 3 |
Quick manual | 2 |
Inquiry - FC400-DAC (Weighing Indicator)