- ★Available for large withstand large inertia.
- ★Hollow structure for wiring arrangement.
- ★Suspended installation available.
- ★High rigidity, and High load capacity.
- ★360° travel Stroke.
Stepper / Servo Motor |
|||
Model No. |
ARG100 |
||
Mechanical Spec. |
Base Size (mm) |
100 X 136 |
|
Table Size (mm) |
Ø 95 |
||
Hollow Size (mm) |
Ø 34 |
||
Travel Stroke |
360 ° | ||
Drive Type |
Gear (Reduction Ratio 1 / 8) R08 |
||
Rail |
Crossed-Roller Guiding |
||
Stage Material / Surface Treatment |
Aluminum Alloy (Steel Countertops) / Black Anodized |
||
Torque (N・m) |
21 |
||
Moment of Inertia (Kg・m2) |
3048 X 10-6 |
||
Max. Speed (rpm) |
200 |
||
Axial Capacity (N) |
1560 |
||
Deviaition Capacity (N・m) |
39 |
||
Weight (Kg) |
2.34 |
||
Precision Spec. |
Accuracy Level |
P:Precision Grade |
|
Positioning Precision |
2' (0.034 °) |
||
Repeatability Precision |
± 10" (± 0.0028 °) |
||
Missed Step |
4' (0.0667 °) |
||
Parallelism (μm) |
20~25 |
||
Dynamic Straightness (μm) |
10 |
||
Dynamic Parallelism (μm) |
10 |
||
Equipped with Motor |
Servo Motor |
Representation |
E70S14 (Addition Purchase) |
Reference Watts (W) |
200 & 400 |
||
Installation Dimensions |
Moment of Installation:P . C . D = Ø 70 Suitable Shaft Diameter Ø 14 |
||
Stepper Motor |
Representation |
T47S08 (Addition Purchase) | |
Reference Watts (W) |
☐57 |
||
Installation Dimensions |
Moment of Installation:☐47 Suitable Shaft Diameter Ø 8 |
||
Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) |
|
Power Voltage |
20V ± 10% |
||
Control Output |
NPN Open Collector Output under 20V 50mA |
||
Output Control |
Testing (Sensing or not):Output Transistor OFF (Closed) |
||
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) |
||
Cable with End of a Thread |
The Length of Cable below 1m:CN14A-C1 (Addition Purchase) |
||
The Length of Cable below 2m:CN14A-C2 (Addition Purchase) |
|||
The Length of Cable below 3m:CN14A-C3 (Addition Purchase) |
|||
The Length of Cable below 5m:CN14A-C5 (Addition Purchase) |
|||
Stepper Motor Electrical Spec. |
Open-loop Driver |
☐57,GTR22G-D |
|
Close-loop Driver |
N/A |
||
Stage Side Connector |
15-Pin male connector D-SUB |
||
Controller Side Connector |
15-Pin female connector D-SUB |
||
Stepper Motor Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) |
|
Power Voltage |
20V ± 10% |
||
Control Output |
NPN Open Collector Output under 20V 50mA |
||
Output Control |
Testing (Sensing or not):Output Transistor OFF (Closed) |
||
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) |
||
Cable with End of a Thread |
The Length of Cable below 1m:CN14A-C1 (Addition Purchase) |
||
The Length of Cable below 2m:CN14A-C2 (Addition Purchase) |
|||
The Length of Cable below 3m:CN14A-C3 (Addition Purchase) |
|||
The Length of Cable below 5m:CN14A-C5 (Addition Purchase) |
|||
DC Servo Electrical Spec. |
DC Servo Motor |
GSV-KM02MB-24DP |
|
DC Servo Driver |
GSVM-D02MD5 |
||
Stage Side Connector |
Manufacturer:TE Connectivity Power cord:172159-1 + 170366-1 (Male end) Encoder cable:172161-1 + 170365-1 (Male end) |
||
Controller Side Connector |
Manufacturer:KST Power cord:E1510-RED (European Terminals) Manufacturer:JST Encoder cable:PHDR-12VS+SPHD-001T-P0.5 (Female end) |
||
AC Servo Electrical Spec. |
AC Servo Motor |
200 W |
GSVM-A02LC4 |
400 W |
GSV-KE04MB21CP |
||
AC Servo Driver |
200 W |
GSVM-A04LC4 |
|
400 W |
GSV-KE04MB21CP |
||
Stage Side Connector |
Manufacturer:TE Connectivity Power cord:172159-1 + 170366-1 (Male end) Encoder cable:172161-1 + 170365-1 (Male end) |
||
Controller Side Connector |
Manufacturer:KST Power cord:E1510-RED (European Terminals) Manufacturer:JST Encoder cable:PHDR-12VS+SPHD-001T-P0.5 (Female end) |
||
Servo Motor Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) |
|
Power Voltage |
20V ± 10% |
||
Control Output |
NPN Open Collector Output under 20V 50mA |
||
Output Control |
Testing (Sensing or not):Output Transistor OFF (Closed) |
||
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) |
||
Cable with End of a Thread |
The Length of Cable below 1m:CN14A-C1 (Addition Purchase) |
||
The Length of Cable below 2m:CN14A-C2 (Addition Purchase) |
|||
The Length of Cable below 3m:CN14A-C3 (Addition Purchase) |
|||
The Length of Cable below 5m:CN14A-C5 (Addition Purchase) |
Inquiry - ARG100 (Hollow Rotary Stage)