Multiple axis-XYZ axis
Table size : 40x40 (mm)
Travel stroke : ±6.5 (mm)
★ Guide-Linear ball bearing. Slide way and body is in one unit. Ball moving in single groove is structured by 2 points – contact, and total 4 contact points in dual arc-groove to form strong rail construction.
★ Transmission Parts-Feeding screw. It is suitable for simple precise moving.
★ Material- Stainless steel
Model no. |
Table size (mm) |
Travel stroke (mm) |
Feeding |
Micrometer |
Straightness Accuracy (μm) |
Loading (kgf) |
Weight |
MPS40-SMR |
40x40 |
±6.5 |
0.5 |
10 |
3 |
4.5 |
0.99 |
MPS40-SML |
40x40 |
±6.5 |
0.5 |
10 |
3 |
4.5 |
0.99 |
The Main Feeding Mode of Mini Stages | |||
Main Feeding Mode | Characteristics | A Crcle Movement of Handle Rotation | Applied for Guiding Device |
●Suitable for high speed mass feed. ●Not suitable for precise positioning.
|
17~20 mm | ● Dovetail | |
Feeding Screw
|
● Use precise threadscrew pitch to proceed simple precise moving. |
0.25~1 mm |
● Dovetail ● Crossed roller ●Linear ball bearing |
Micrometer Head |
● Precise Reading Unit: 0.01mm is suitable for precise tuning. | 0.5 mm |
●Dovetail ● Crossed roller ● Linear ball bearing |
● Divided into rough moving (general feeding) and slight moving (micro feeding) use. ● It’s a special feeding device and a bit costly. ● Differential motion structure for slightly transmission. |
Coarse tuning:0.5 mm Fine tuning:0.025mm |
●Linear ball bearing ● Crossed roller |
Feeding Position |
|
Inquiry - MPS-SMR(L) (Special Specification)