59, Jalan Hijauan Hills 2,
Hijauan Hills,
14200 Simpang Ampat,
Pulau Pinang, Malaysia.
FC400-CCL( CC-LINK)
Previous | 5 / 25 | Next |
FC400-CCL

Product outline

Equipped as standard with CC-Link interface!!
Light & compact body for DIN rail mounting.
FC400-CCL is a weighing indicator equipped as standard with CC-Link interface. It is ideal for a variety of weighing applications like hopper scales, bagging machines, and level meters.
Network with multiple units can be configured easily.

Lightweight and compact body to fit into limited space in a control panel
DIN-rail mountable
Dimensions: 34(W)×88(H)×91(D)mm (Projections excluded)
Weight: Approx. 210g

Various interfaces
Equipped with CC-link, RS-485, and USB interface!

High sampling rate & resolution
High-Speed A/D conversion and powerful digital processing capability of 1200 times/sec..
High display resolution of 1/100000 (max).
Measurement can be performed quickly and precisely due to high speed A/D conversion.

Various functions useful for automated weighing systems
¡ö High performance filter
As it is resistant to vibration, measurement can be performed quickly and precisely.
¡ö Equivalent input calibration
Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.
¡ö Multipoint calibration (linearization)
Three additional points can be defined in the middle between zero and span for better linearity.
¡ö Basic weighing process control function
Sequential control can be performed without connecting external PLC etc.

Specifications
Analog£üDisplay£üExternal signal£üInterface£üGeneral specification£üAttachment
Analog | |
Excitation voltage |
DC5V±5% Output current: 90mA Ratiometric method (Up to 6 350Ω load cells can be connected in parallel£© |
---|---|
Signal input range | £2.5 to 5.1mV/V |
Zero adjustment range | Automatic adjustment by digital processing -0.5 to 2.0mV/V |
Span adjustment range |
Automatic adjustment by digital processing 0.02 to 3.0mV/V |
Gain correction | Up to three point multi-point calibration is possible using linearization function |
Min. input sensitivity | 0.15μV/count |
Accuracy |
Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/¡æ Typ Gain drift: 1ppm/¡æ Typ |
Filter |
Digital low-pass filter: 0.1 to 300 Hz Moving average filter: OFF, 2 to 512 times |
A/D converter |
Speed: 1200 times/sec. Resolution: 24bit binary |
Display | |
Display unit | Character height 8mm, Numerical display by 7-segment green LED |
---|---|
Display value | Up to 6 digits |
Display frequency | Selectable from 3, 6, 13, 25 times/sec. |
Status display | RUN, SD, RD, ERR |
External signal | |
Output signal (5 points) |
Selectable/configurable Transistor’s open collector output Vceo=30V, Ic=50mA |
---|---|
Input signal (3 points) |
Selectable/configurable Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). * DC24V external power supply is required. |
Interface | |
USB | USB interface |
---|---|
485 | RS-485 interface (Selectable from Modbus-RTU or UNI-Format) |
CCL | CC-Link interface |
General specification | |
Power supply voltage | DC24V (±15%) |
---|---|
Power consumption | 3W typ |
Operating conditions |
Temperature: Operating temperature range: -10¡æ to £«50¡æ, torage temperature range: £20¡æ to £«85¡æ Humidity: 85%RH or less (non-condensing) |
Dimensions | 34(W)×88(H)×91(D) mm (Projections excluded) |
Weight | Approx. 210g |
Attachment | |
Jumper cable | 2 |
---|---|
Mini driver | 1 |
CC-Link connector | 1 |
Various I/O connector | 2 |
Quick manual | 2 |
Our Agency Product Brands |
