59, Jalan Hijauan Hills 2,
Hijauan Hills,
14200 Simpang Ampat,
Pulau Pinang, Malaysia.
F701-S
Previous | 9 / 25 | Next |
F701-S

Product outline

High grade unit that pursues high specifications and functions.
F701-S is a weighing indicator with high specifications and various functions such as super-low-drift high-precision amplifier, fast-sampling, weighing sequence functions that are useful for automatic weighing machines and control I/O.

Specifications
Analog£üSetting£üExternal signal£üInterface£üDisplay£üGeneral specification£üAttachment
Analog | |
Excitation voltage | DC5V±5% Output current£ºwithin 90mA Ratio metric type (Up to six 350Ω load cells can be connected in parallel.) |
---|---|
Signal input range | £0.5¡«3.0mV/V , 0 to 3.0mV/V (when OIML R76-1-compliant)¡¡ |
Zero adjustment range |
Automatic adjustment by digital operation £0.2¡«2.0mV/V , 0 to 2.0mV/V (when OIML R76-1-compliant)¡¡ |
Span adjustment range |
Automatic adjustment by digital operation |
Minimum input sensitivity | 0.15μV/count , 0.5μV/count (when OIML R76-1-compliant)¡¡ |
Accuracy |
|
A/D converter |
Conversion rate…300 times/sec. Conversion resolution…24bit£¨binary£© |
Minimum indication resolution | 1/10000, 1/6000 (when OIML R76-1-compliant) |
Secondary calibration | Equivalent input calibration Minimum indication resolution for secondary calibration£º1/1000£¨ordinary temperature£© |
Setting | |
Setting method |
Settings are made by operating the membrane keys. Also, settings can be made from a host computer through the RS-485 interface. |
---|---|
Memory of set value |
Calibration value and a part of set value: NOV.RAM (nonvolatile RAM) Other set values: F-RAM (nonvolatile RAM) |
Protect of set value | Protect can be set by Lock switch and Lock parameter. |
Setting item |
Upper limit£¯Lower limit£¯Near zero£¯Set point 1£¯Set point 2£¯Compensation£¯Over£¯Under£¯Final£¯Comparison inhibit time£¯Judging time£¯Complete output time£¯Compensation feeding time£¯Auto free fall compensation regulation£¯Weighing function 1£¯Weighing function 2£¯Tare setting£¯Tare display£¯Digital low pass filter£¯Moving average filter£¯MD£¯ZT period£¯ZT range£¯Total comparison selection£¯Total limit (most significant 4 digits)£¯Total limit (least significant 5 digits)£¯Count limit£¯Weighing function 3£¯Key invalid・Lock£¯Input selection 1£¯Input selection 2£¯Output selection 1£¯Output selection 2£¯Error output selection£¯Reserve output selection£¯Password£¯Bag clamp output time£¯Discharging time£¯Weighing start time£¯AZ times£¯Judging times£¯Sequence mode 1£¯Sequence mode 2£¯Filling enhancement value£¯Expanded function selection 1£¯Expanded function selection 2£¯Balance weight value£¯Capacity£¯Min. scale division£¯DZ regulation value£¯Display selection 1£¯Gravitational acceleration£¯Net over£¯Gross over£¯Display selection 2£¯RS-485 I/F setting£¯RS-485 Communication type£¯RS-485 ID£¯Transmission delay time£¯Zero calibration£¯Span calibration£¯Equivalent calibration£¯Option display |
External signal £¨You can specify whether PNP (Source) type or NPN (Sink) type when order the F701-S.£© | |
Output signals£¨16points£© |
SP1£¯SP2£¯SP3£¯Complete£¯Discharge£¯Bag clamp £¯Error selection 1,2£¯Output selection 1¡«6£¯Reserve 1,2 At signal ON, output transistor ON.¡¡ ¡ùExternal voltage must be prepared separately by customer. |
---|---|
Input signals £¨16points£© |
Operation permission£¯Weighing start£¯Stop£¯Discharge command£¯Manual discharge£¯Discharge gate open£¯Accumulation clear£¯Input selection 1¡«6£¯Code 1,2,4 Contact (relay, switch etc.) or non-contact (transistor, open collector etc.) can be connected. ¡ùExternal voltage must be prepared separately by customer. |
Interface | |
RS-485 communication interface (Select from Modbus-RTU and original format) 232£ºRS-232C communication interface£¨option£© BCO£ºBCD parallel data output interface (sink type) (option) BSC£ºBCD parallel data output interface (source type) (option) DAC£ºD/A converter (option) ODN£ºDeviceNet interface (option) PRF£ºPROFIBUS interface (option) ¡ùPROFIBUS-DPV0 CCL£ºCC-Link interface (option) |
Display | |
Display |
18.5mm in character height, Numerical display on LCD(7 digit) Sub display£º7.3mm in character height (14 digit) |
---|---|
Indicated value | 5 digit¡¡sign: negative display at the highest digit |
Accumulation value | 9 digit¡¡¡ùThis can be changed to ''Accumulation count (4 digit)'', ''Final(5 digit)'', ''Code(1 digit)'', ''Total discharge count (6 digit)'' and ''Discharge count (5 digit)''. |
Display frequency | Select from 1, 2, 5, 10, 20 times/sec.(The system speed is 300 times/sec.) |
Capacity | 5 digit |
Min. scale division |
Setting allowable in the range of 1¡«50. * Only the following settings are valid when OIML R76-1-compliant: 0.001, 0.002, 0.005, 0.010, 0.020, 0.050, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50 |
Decimal point | Select from 0, 0.0, 0.00, 0.000 |
Over display |
LOAD£ºA/D converter input over, OFL1£ºNet Over, OFL2£ºCapacity +9 scale division, -OFL2£ºCapacity -over or -20 scale division over, OFL3£ºGross Over |
Center zero |
A true zero point or the center of each value is displayed. *Only true zero point is displayed when OIML R76-1-compliant.¡¡ |
Status display |
CLAMP£¯SP3£¯SP2£¯SP1£¯HOLD£¯ COMPL.£¯ZT£¯ZALM£¯STAB£¯TARE£¯NET£¯GROSS£¯NZ£¯ D.CHG£¯HI LIM£¯HI£¯GO£¯LO£¯LO LIM£¯CZ£¯LOCK |
General specification | |
Power supply voltage | AC100¡«240V(£«10£¥£15£¥) £¨free power source 50/60Hz£© |
---|---|
Power consumption | 15W max. |
Inrush current |
2A, 3mSec:AC240V average load condition £¨cold start at room temperature£© |
Operating conditions |
Temperature…Operation £10¡æ¡«£«40¡æ¡¡Storage £20¡æ¡«£«85¡æ Humidity…85% or less (non-condensing) |
External dimensions | 192(W)×96(H)×140(D) mm (Projections excluded) |
Panel cutout dimensions |
186 +2 -0(W)×92 +1 -0(H)mm ¡ùInstallation panel thickness: 1.6¡«3.2mm |
Weight | Approx. 2kg |
Attachment | |
AC input cord (Nominal rating 125V) 2m | 1 |
---|---|
Loadcell connector | 1 |
Load cell connector rubber | 1 |
External I/O signal connector | 1 |
Operation manual | 1 |
Rubber packing | 1 |
BCD output connector(with BCD output option) | 1 |
DeviceNet connector£¨with DeviceNet option£© | 1 |
CC-Link connector(with CC-Link option£© | 1 |

Option
Model | Interface |
232 | RS-232C communication interface |
---|---|
BCO | BCD parallel data output interface (sink type) |
BSC | BCD parallel data output interface (source type) |
DAC | D/A converter |
ODN | DeviceNet interface |
PRF | PROFIBUS interface |
CCL | CC-Link interface |

Optional accessories
Product | Description |
CAAC3P-P2 | AC input cord¡¡2m |
---|---|
CAAC3P-CEE7/7-P1.5 | AC input cord£¨voltage resistance:250V£©1.5m |
CA4131 | £¨6-wired£©cable with JRC connector at one end 3m |
CA4230 | JRC-PRC £¨6-wired£©conversion relay cable 0.3m |
CA4311 | JRC-PRC £¨6-wired£©conversion relay cable £¨4-wired to 6-wired£©£¨for 520A use£©1m |
CN3P-2P | 3P-2P converter plug for AC input cord |
CN10 | Loadcell connector |
CN34 | D-Sub 9p connector for RS-232 |
CN51 | BCD output connector |
CN52 | FCN series I/O connector (with cover) |
CN57 | FCN series I/O connector (with diagonal cover) |
CN71 | CC-Link connector |
CND01 | DeviceNet connector |
Our Agency Product Brands |
