Language: EN | 中文 |

TM301 (Torque Monitor)

Share:


TM301 (Torque Monitor)



Product outline

● Torque, rotational speed, and power* are displayed simultaneously.
● Upper/lower comparators with hold functions.
● Data storage function.
 (Record last 30 measurement data of torque, rotational speed, and power)
● The unit supplies electric power to UTMⅡ/UTMV.
● Easy connection to UTMⅡ/UTMV with the supplied cable.
  * Power (W) = 2π×Torque (N m) × Rotation speed (rpm) / 60

 

 

Specifications

Torque sensor input(voltage input)
Input resistance 1 MΩ or more
Signal input range -5 to +5 V
Accuracy Non-linearity : Within 0.02%/FS±1 digit
Zero drift : Within 0.2 mV/℃ RTI
Gain drift : Within 0.01%/℃
A/D converter ・ Speed : 300 times/sec.
・ Resolution : 24 bit (binary)
Effective Resolution : 1/30000 with respect to 5 V
Analog filter Low-pass filter (-6 dB/oct.)
Selectable from 3 Hz, 30 Hz, 300 Hz, and 1 kHz.
Voltage monitor output Linked to the output voltage of the torque meter
 
Drive power supply for UTMⅡ/UTMV
Power supply voltag DC 24 V *One UTMⅡ/UTMV at the maximum
 
Pulse input for rotation speed (open collector input)
Maximum input frequency Conforming to the maximum rotation speed of UTMⅡ/UTMV
Minimum input frequency Selectable from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr)
Selectable from 60, 40, 20, 12, or 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width 50 μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic = Approx. 10 mA)
 
Display section
Display Main display : Character height 15 mm Numerical display by 7-segments green LED (5 digits+sign)
Sub display : Character height 8 mm Numerical display by 7-segment green LED (5-digit)
Indicated value Main display : 5 digits -99999 to +99999 Signs : Minus sign on most significant digit
Sub display : 5 digits -19999 to +99999 Signs : Minus sign on most significant digit
(No minus sign for rotational speed)
Decimal point 0, 0.0, 0.00, 0.000 (Only a torque and a power. Rotation speed is nothing)
Display frequency Selectable from 3, 6, 13, and 25 times/sec.
Status display HI / LO / HOLD
 
Setting section
Setting item HI/LO limit :
HI limit / LO limit / Alarm HI limit / Alarm LO limit

 

Comparison/hold :
Comparison function select / Near zero / Hysteresis / Hold function select / Detection time / Average sample number / Hold start level

Operation 1 :
Motion detect (time) / Motion detect (range) / Zero tracking (time) / Zero tracking (range) / SI/F function select / Display frequency / Display ON/OFF

Operation 2 :
Digital filter (torque) / Analog filter (torque) / Dead band / Digital filter (rotation speed)

Calibration :
Calibration function select 1 (torque) / Zero calibration / Equivalent input calibration / Actual load calibration / Digital offset / Digital Zero limit / Calibration function select 2 (rotation speed/power)

Protect/Initializ :
Setting protect / Key protect / Initialize / Password / Record data clear

Hold Sample, Peak, Bottom, P-P, Average
Hold section setting (All section・External signal・External signal+Time・Level+Time)
 
External I/O section
External input
(4)
Hold control / Hold reset / Digital Zero / Record data clear
Dry contact input circuit (minus common type), Ic = 10 mA or less
External output
(12)
Torque HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) / Rotation speed HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) /
Hold complete / RUN
Open collector output circuit (sink type), Vceo = 30 V (max) Ic = 30 mA (max)
Interface SIF : 2-wire serial interface
BCO : BCD parallel data output interface (Option)
D3V : D/A converter voltage output(3 ch) (Option)
DAV : D/A converter voltage output (Option)
DAI : D/A converter current output (Option)
232 : RS-232C communication interface (Option)
USB : USB interface (Option)
* Only one option can be installed.
 

 

General specifications
Power supply voltage AC 100 V to 240 V(+10%-15%)(free power source) 50/60 Hz
Power consumption 7 W typ.
Operating conditions Operation temperature : -10 to +40℃
Storage temperature : -40 to +80℃
Humidity : 85% RH or less(non-condensing)
Dimensions 96(W) × 96(H) × 138(D) mm (Not including projections)
Weight Approx. 1.0 kg
 
Attachments
Operation manual 1
Cable for UTMⅡ/UTMV connection 2 m 1
External input/output connector 1
AC input cord 3 m (with solderless terminal)* 1
Unit seal 1
Connector for BCD output (with BCD output option) 1
Mini screwdriver (with D/A converter option) 1
Operating tool (with D/A converter(3 ch) option) 1

*The attached AC input cord is intended for 100 V AC power in Japan.

 

Option (Only one option can be installed.)

Model Description
BCO BCD parallel data output interface
D3V D/A converter voltage output(3 ch)
DAV D/A converter voltage output
DAI D/A converter current output
232 RS-232C communication interface
USB USB interface
 

Optional accessories

Model Description
CA372-I/O Cable with FCN connector at one-end 3 m
CAAC2P-B3 AC Supply cord 3 m(Same as the attachment)
CAAC3P-B3 AC Supply cord 3 m
CA325AC3P-B3 AC Supply cord 3 m
CATM21-M Cable for UTMⅡ/UTMV connection 2 m
(Same as the attachment)
CN34 D-Sub9p connector for RS-232C
CN51 BCD output connector
CN73 D/A converter(3 ch) connector
CN90 Waterproof plastic connector for UTMⅡ/UTMV connection
CA81-USB USB cable (Type-A-Bmini) 1.8 m
CAAC3P-CEE7/7-B2 AC Supply cord (Voltage resistance:250 V)2 m
CA325AC3P-CEE7/7-B2 AC Supply cord (Voltage resistance:250 V)2 m
CATM51-M Cable for UTMⅡ/UTMV connection 5 m
CN50 FCN series I/O connector (with cover)
(Same as the attachment)
CN55 FCN series I/O connector (with diagonal cover)
DTC2-PSL Case for TM301
GMP96x96 Rubber packing

 


Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.


 

Structure of product code





 

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.