Share:
Product outline
F701-C is a general-purpose weighing controller that is compatible with all weighing systems. This is a practical device excellent in cost effectiveness, which is equipped with the final discharge function allowing high-accuracy feeding and discharging weighing control and the weighing sequence function essential to hopper and packing scales.
Installable is the interface that can be connected to PLCs or various peripherals such as BCD output, RS-232C and CC-Link.
Installable is the interface that can be connected to PLCs or various peripherals such as BCD output, RS-232C and CC-Link.
Specifications
Analog section｜Setting section｜External signal｜Interface｜Display section｜General specifications｜Attachments
| Analog section | |
| Excitation voltage | DC 10 V ±5%, Output current; within 120 mA Remote sense type (Up to 4 350 Ω load cells can be connected in parallel.) |
|---|---|
| Zero adjustment range | 0 to 2 mV/V Rough adjustment: Digitally controlled by rough adjustment circuit Fine adjustment: Automatic adjustment by digital processing |
| Gain adjustment range | 0.3 to 3.2 mV/V Rough adjustment: Digitally controlled by rough adjustment circuit Fine adjustment: Automatic adjustment by digital processing |
| Min. input sensitivity | 0.3 μV/count |
| Accuracy | Non-linearity: within 0.01% FS Zero drift: within 0.2 μV/°C RTI Gain drift: within 15 ppm/°C |
| Analog filter | Bessel type low-pass filter (-12 dB/oct.), Selectable from 2, 4, 6, 8 Hz |
| A/D converter | Speed: 200 times/sec. Resolution: 24 bit (binary) |
| Setting section | |
| Setting items | – High limit, Low limit, near zero, SP1, SP2, Compensation, over, under, final ･ Comparison inhibit time, judging time, complete output time, adjust feeding time, auto zero times, judging times. Auto free fall compensation regulation, analog filter, tare weight ･ Weighing function 1, weighing function 2, weighing function 3, sequence mode, function key inhibit, digital filter, motion detect, zero tracking period, zero tracking range ･ Balance weight value, capacity, min. scale division, net over, gross over, DZ regulation value, function selection, gravitation acceleration (area number input), gravitation acceleration (acceleration input) ･ D/A output mode, D/A zero output weight, D/A full scale, RS-485 I/F, ID number, RS-232C I/F, external function selection, setting value LOCK, restriction on the tare subtraction function ･ Input selection, output selection, CC-Link I/F Occupied station & Transmission speed, CC-Link I/F Station No. ･ Average weight, maximum weight, minimum weight, population standard deviation, sample standard deviation, number of data (n), latest accumulation date, Maximum-minimum (R), option substrate ･ Span calibration, equivalent input calibration, password input, zero calibration |
|---|---|
| Display section | |
| Display unit | Numerical display of 10.4 mm character height via vacuum fluorescent display (7 digits) Sub display: 4.0 mm Character height |
|---|---|
| Display value | 5 digits, Sign; Minus sign on most significant digit |
| Unit | Selectable from t, kg, g, N, lb, none |
| Status display | SP1, SP2, SP3, near zero, Hold, zero alarm, stable, tare, net, zero, battery low indicator |
| General specifications | |
| Power supply voltage | AC 100 to 240 V (+10%-15%) (Free power source at 50/60 Hz) |
|---|---|
| Power consumption | 11 VA typ. |
| Operating conditions | Operation temperature:-10 to +40°C; Storage temperature:-20 to +85°C Humidity: 85% RH or less (non-condensing) |
| Dimension | 144(W) × 72(H) × 160(D) mm (Not including projections) |
| Weight | Approx. 1.0 kg |
| Attachments | |
| AC input cord (nominal rating: 125 V) 3 m | 1 |
|---|---|
| Mini screwdriver | 1 |
| FCN series I/O connector (with cover) | 1 |
| Jumper wire | 2 |
| Operation Manual | 1 |
| Load cell input connector terminal block (Already mounted on the main unit) | 1 |
| CC-Link connector (when CC-Link option is selected) | 1 |
| BCD output connector (when BCD output option is selected) | 1 |
| D/A converter connector (when D/A converter option is selected) | 1 |
| RS-485 connector (when RS-485 option is selected) | 1 |
Optional accessories
| Model | |
| CAAC2P-B3 | AC input cord 3 m |
|---|---|
| CAAC3P-CEE7/7-B2 | AC input cord (Voltage resistance:250 V) 2 m |
| CN34 | D-Sub 9p connector for RS-232C |
| CN50 | FCN series I/O connector (with cover)(Same as the attachment) |
| CN55 | FCN series I/O connector (with diagonal cover) |
| CN70 | D/A converter connector |
| CN71 | RS-485・CC-Link connector |
| CN72 | Double row connector for CC-Link |
| CN80 | Load cell input connector terminal block (Same accessory as the attached one) |
| F720 fixing panel | F252/F280 Fixing panel for conversion of F701-C |
| LB01-XH | Lithium battery (with XH connector) |
Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.
Structure of product code
Inquiry - F701-C (Weighing Indicator)
