Model No. |
CXN5030-F2NN-ND-P1 |
CXN5030-F2NN-ND-P2 |
CXN5050-F2NN-ND-P1 |
CXN5050-F2NN-ND-P2 |
CXN5075-F2NN-ND-P1 |
CXN5075-F2NN-ND-P2 |
Table Size (mm) |
50x50 |
50x50 |
50x50 |
50x50 |
50x50 |
50x50 |
Travel Stroke (mm) |
30 |
30 |
50 |
50 |
75 |
75 |
Drive Type |
Ball Screw Ø8,Lead 1mm |
Ball Screw Ø8,Lead 2mm |
Ball Screw Ø8,Lead 1mm |
Ball Screw Ø8,Lead 2mm |
Ball Screw Ø8,Lead 1mm |
Ball Screw Ø8,Lead 2mm |
Rail |
Circular Linear Ball Guiding | Circular Linear Ball Guiding | Circular Linear Ball Guiding | Circular Linear Ball Guiding | Circular Linear Ball Guiding | Circular Linear Ball Guiding |
Stage Material |
Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel |
Surface Treatment |
Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating |
Main Unit Weight (Kg) |
0.97 | 0.97 | 1.1 | 1.1 | 1.24 | 1.24 |
Coupling |
FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 |
Accuracy Level |
Standard | Standard | Standard | Standard | Standard | Standard |
Wiring Method |
GMT Standard | GMT Standard | GMT Standard | GMT Standard | GMT Standard | GMT Standard |
Resolution (Pulse) (µm) |
5 (Full) / 2.5 (Half) | 10 (Full) /5 (Half) | 5 (Full) / 2.5 (Half) | 10 (Full) /5 (Half) | 5 (Full) / 2.5 (Half) | 10 (Full) /5 (Half) |
Max. Speed (Full Step) (mm / sec) |
20 | 40 | 20 | 40 | 20 | 40 |
Positioning Presion (µm) |
15 | 15 | 15 | 15 | 15 | 15 |
Repeatability Precision (µm) |
±1 | ±1 | ±1 | ±1 | ±1 | ±1 |
Multi-point Repeatability Precision(µm) |
N/A | N/A | N/A | N/A | N/A | N/A |
Load Capacity (Kgf) |
10 | 10 | 10 | 10 | 10 | 10 |
Missed Step (µm) |
3 | 3 | 3 | 3 | 3 | 3 |
Moment Stiffness |
N/A | N/A | N/A | N/A | N/A | N/A |
Pitch / Yaw |
N/A | N/A | N/A | N/A | N/A | N/A |
Parallelism (µm) |
15 | 15 | 15 | 15 | 15 | 15 |
Dynamic Straightness (µm) |
3 |
3 |
3 |
3 |
3 |
3 |
Dynamic Parallelism (µm) |
10 |
10 |
10 |
10 |
10 |
10 |
Motor Type |
2-Phase Stepper | 2-Phase Stepper | 2-Phase Stepper | 2-Phase Stepper | 2-Phase Stepper | 2-Phase Stepper |
Motor Shaft Numbers |
☐ 28 Double Shafts | ☐ 28 Double Shafts | ☐ 28 Double Shafts | ☐ 28 Double Shafts | ☐ 28 Double Shafts | ☐ 28 Double Shafts |
Motor Brand |
GMT |
GMT |
GMT |
GMT |
GMT |
GMT |
Motor Model |
2MS-N28D32A |
2MS-N28D32A |
2MS-N28D32A |
2MS-N28D32A |
2MS-N28D32A |
2MS-N28D32A |
Driver Brand |
GMT |
GMT |
GMT |
GMT |
GMT |
GMT |
Driver Model |
GTR22G-D |
GTR22G-D |
GTR22G-D |
GTR22G-D |
GTR22G-D |
GTR22G-D |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
Controller Side Connetor |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
Origin Sensor |
Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor |
Limit Sensor |
Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor |
Power Voltage |
24V ± 10% | 24V ± 10% | 24V ± 10% | 24V ± 10% | 24V ± 10% | 24V ± 10% |
Control Output |
NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA |
Output Control |
Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) |
Model No. |
CXN50100-F2NN-ND-P1 |
CXN50100-F2NN-ND-P2 |
CXN50150-F2NN-ND-P2 |
CXN50200-F2NN-ND-P2 |
Table Size (mm) |
50x50 |
50x50 |
50x50 |
50x50 |
Travel Stroke (mm) |
100 |
100 |
150 |
200 |
Drive Type |
Ball Screw Ø8,Lead 1mm |
Ball Screw Ø8,Lead 2mm |
Ball Screw Ø8,Lead 2mm | Ball Screw Ø8,Lead 2mm |
Rail |
Circular Linear Ball Guiding | Circular Linear Ball Guiding | Circular Linear Ball Guiding | Circular Linear Ball Guiding |
Stage Material |
Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel |
Surface Treatment |
Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating |
Main Unit Weight (Kg) |
1.35 | 1.35 | 1.5 | 1.76 |
Coupling |
FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 |
Accuracy Level |
Standard | Standard | Standard | Standard |
Wiring Method |
GMT Standard | GMT Standard | GMT Standard | GMT Standard |
Resolution (Pulse) (µm) |
5 (Full) / 2.5 (Half) | 10 (Full) /5 (Half) | 10 (Full) /5 (Half) | 10 (Full) /5 (Half) |
Max. Speed (Full Step) (mm / sec) |
20 | 40 | 40 | 40 |
Positioning Presion (µm) |
15 | 15 | 20 | 20 |
Repeatability Precision (µm) |
±1 | ±1 | ±1 | ±1 |
Multi-point Repeatability Precision(µm) |
N/A | N/A | N/A | N/A |
Load Capacity (Kgf) |
10 | 10 | 10 | 10 |
Missed Step (µm) |
3 | 3 | 3 | 3 |
Moment Stiffness |
N/A | N/A | N/A | N/A |
Pitch / Yaw |
N/A | N/A | N/A | N/A |
Parallelism (µm) |
20 | 20 | 20 | 20 |
Dynamic Straightness (µm) |
5 | 5 | 5 | 5 |
Dynamic Parallelism (µm) |
10 |
10 |
15 |
20 |
Motor Type |
2-Phase Stepper | 2-Phase Stepper | 2-Phase Stepper | 2-Phase Stepper |
Motor Shaft Numbers |
☐ 28 Double Shafts | ☐ 28 Double Shafts | ☐ 28 Double Shafts | ☐ 28 Double Shafts |
Motor Brand |
GMT |
GMT |
GMT |
GMT |
Motor Model |
2MS-N28D45A |
2MS-N28D45A |
2MS-N28D45A |
2MS-N28D45A |
Driver Brand |
GMT |
GMT |
GMT |
GMT |
Driver Model |
GTR22G-D |
GTR22G-D |
GTR22G-D |
GTR22G-D |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
Controller Side Connetor |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
Origin Sensor |
Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor |
Limit Sensor |
Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor | Photoelectric sensor GMT-sensor |
Power Voltage |
24V ± 10% | 24V ± 10% | 24V ± 10% | 24V ± 10% |
Control Output |
NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA |
Output Control |
Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) | Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |
|
Inquiry - CXN50 - Standard