Model No. |
CYS8020-F2NN-ND |
CYS8030-F2NN-ND |
CYS8050-F2NN-ND |
||
Mechanical Spec. |
Table Size (mm) |
80 X 80 |
|||
Travel Stroke (mm) |
20 |
30 |
50 |
||
Drive Type |
Ball screw Ø8, lead 1mm |
||||
Rail |
Linear Ball Guiding |
||||
Stage Material / Surface Treatment |
Carbon Steel / Nickel Plating |
||||
Main Unit Weight (Kg) |
2.3 |
2.4 |
2.7 |
||
Coupling |
FAMCS11.6-5*5 |
||||
Accuracy Level |
N:Standard grade |
||||
Wiring Method |
N:GMT Standard |
||||
Precision Spec. |
Resolution (Pulse) (µm) |
5 (Full) / 2.5 (Half) |
|||
Max. Speed (Full Step) (mm / sec) |
20 |
||||
Positioning Presion (µm) |
15 |
||||
Repeatability Precision (µm) |
± 1 |
||||
Load Capacity (Kgf) |
7 |
||||
Missed Step (µm) |
3 |
||||
Parallelism (µm) |
20 |
||||
Dynamic Straightness (µm) |
3 |
||||
Dynamic Parallelism (µm) |
10 |
||||
Electrical Spec. |
Motor |
Type / Shaft Numbers |
2-phase stepper / ☐ 28 double shafts |
||
Brand / Model |
GMT / 2MS-N28D32A |
||||
Driver Brand / Model |
GMT / GTR22G-D (Additional options) |
||||
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|||
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
||||
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|||
Limit Sensor |
|||||
Power Voltage |
24V ± 10% |
||||
Control Output |
NPN open collector output under 24V 8mA |
||||
Output Control |
Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |
|
Inquiry - CYS80 - Standard