Share:
★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel
| Model No. | Specification | Value |
|---|---|---|
| CXN8030-S2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN8030-S2PN-CD-P1 | Travel Stroke (mm) | 30 |
| CXN8030-S2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN8030-S2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN8030-S2PN-CD-P1 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN8030-S2PN-CD-P1 | Main Unit Weight (Kg) | 1.5 |
| CXN8030-S2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN8030-S2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN8030-S2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN8030-S2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN8030-S2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN8030-S2PN-CD-P1 | Positioning Presion (µm) | 5 |
| CXN8030-S2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN8030-S2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN8030-S2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN8030-S2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN8030-S2PN-CD-P1 | Dynamic Straightness (µm) | 2 |
| CXN8030-S2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN8030-S2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8030-S2PN-CD-P1 | Brand / Model | SANYO / SH5281-7211 |
| CXN8030-S2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN8030-S2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8030-S2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8030-S2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8030-S2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8030-S2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN8030-S2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN8030-S2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8030-F2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN8030-F2PN-CD-P1 | Travel Stroke (mm) | 30 |
| CXN8030-F2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN8030-F2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN8030-F2PN-CD-P1 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN8030-F2PN-CD-P1 | Main Unit Weight (Kg) | 1.5 |
| CXN8030-F2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN8030-F2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN8030-F2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN8030-F2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN8030-F2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN8030-F2PN-CD-P1 | Positioning Presion (µm) | 5 |
| CXN8030-F2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN8030-F2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN8030-F2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN8030-F2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN8030-F2PN-CD-P1 | Dynamic Straightness (µm) | 2 |
| CXN8030-F2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN8030-F2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8030-F2PN-CD-P1 | Brand / Model | SANYO / SH5281-7211 |
| CXN8030-F2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN8030-F2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8030-F2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8030-F2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8030-F2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8030-F2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN8030-F2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN8030-F2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8030-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN8030-S2PN-CD-P2 | Travel Stroke (mm) | 30 |
| CXN8030-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN8030-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN8030-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN8030-S2PN-CD-P2 | Main Unit Weight (Kg) | 1.5 |
| CXN8030-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN8030-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN8030-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN8030-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN8030-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN8030-S2PN-CD-P2 | Positioning Presion (µm) | 5 |
| CXN8030-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN8030-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN8030-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN8030-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN8030-S2PN-CD-P2 | Dynamic Straightness (µm) | 2 |
| CXN8030-S2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN8030-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8030-S2PN-CD-P2 | Brand / Model | SANYO / SH5281-7211 |
| CXN8030-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN8030-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8030-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8030-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8030-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8030-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN8030-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN8030-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8030-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN8030-F2PN-CD-P2 | Travel Stroke (mm) | 30 |
| CXN8030-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN8030-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN8030-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN8030-F2PN-CD-P2 | Main Unit Weight (Kg) | 1.5 |
| CXN8030-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN8030-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN8030-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN8030-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN8030-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN8030-F2PN-CD-P2 | Positioning Presion (µm) | 5 |
| CXN8030-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN8030-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN8030-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN8030-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN8030-F2PN-CD-P2 | Dynamic Straightness (µm) | 2 |
| CXN8030-F2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN8030-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8030-F2PN-CD-P2 | Brand / Model | SANYO / SH5281-7211 |
| CXN8030-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN8030-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8030-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8030-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8030-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8030-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN8030-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN8030-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8050-S2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN8050-S2PN-CD-P1 | Travel Stroke (mm) | 50 |
| CXN8050-S2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN8050-S2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN8050-S2PN-CD-P1 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN8050-S2PN-CD-P1 | Main Unit Weight (Kg) | 1.68 |
| CXN8050-S2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN8050-S2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN8050-S2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN8050-S2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN8050-S2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN8050-S2PN-CD-P1 | Positioning Presion (µm) | 5 |
| CXN8050-S2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN8050-S2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN8050-S2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN8050-S2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN8050-S2PN-CD-P1 | Dynamic Straightness (µm) | 2 |
| CXN8050-S2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN8050-S2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8050-S2PN-CD-P1 | Brand / Model | SANYO / SH5281-7211 |
| CXN8050-S2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN8050-S2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8050-S2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8050-S2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8050-S2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8050-S2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN8050-S2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN8050-S2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8050-F2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN8050-F2PN-CD-P1 | Travel Stroke (mm) | 50 |
| CXN8050-F2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN8050-F2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN8050-F2PN-CD-P1 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN8050-F2PN-CD-P1 | Main Unit Weight (Kg) | 1.68 |
| CXN8050-F2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN8050-F2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN8050-F2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN8050-F2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN8050-F2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN8050-F2PN-CD-P1 | Positioning Presion (µm) | 5 |
| CXN8050-F2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN8050-F2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN8050-F2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN8050-F2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN8050-F2PN-CD-P1 | Dynamic Straightness (µm) | 2 |
| CXN8050-F2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN8050-F2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8050-F2PN-CD-P1 | Brand / Model | SANYO / SH5281-7211 |
| CXN8050-F2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN8050-F2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8050-F2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8050-F2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8050-F2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8050-F2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN8050-F2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN8050-F2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8050-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN8050-S2PN-CD-P2 | Travel Stroke (mm) | 50 |
| CXN8050-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN8050-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN8050-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN8050-S2PN-CD-P2 | Main Unit Weight (Kg) | 1.68 |
| CXN8050-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN8050-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN8050-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN8050-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN8050-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN8050-S2PN-CD-P2 | Positioning Presion (µm) | 5 |
| CXN8050-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN8050-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN8050-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN8050-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN8050-S2PN-CD-P2 | Dynamic Straightness (µm) | 2 |
| CXN8050-S2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN8050-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8050-S2PN-CD-P2 | Brand / Model | SANYO / SH5281-7211 |
| CXN8050-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN8050-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8050-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8050-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8050-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8050-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN8050-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN8050-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8050-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN8050-F2PN-CD-P2 | Travel Stroke (mm) | 50 |
| CXN8050-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN8050-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN8050-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN8050-F2PN-CD-P2 | Main Unit Weight (Kg) | 1.68 |
| CXN8050-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN8050-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN8050-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN8050-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN8050-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN8050-F2PN-CD-P2 | Positioning Presion (µm) | 5 |
| CXN8050-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN8050-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN8050-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN8050-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN8050-F2PN-CD-P2 | Dynamic Straightness (µm) | 2 |
| CXN8050-F2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN8050-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8050-F2PN-CD-P2 | Brand / Model | SANYO / SH5281-7211 |
| CXN8050-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN8050-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8050-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8050-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8050-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8050-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN8050-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN8050-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8075-S2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN8075-S2PN-CD-P1 | Travel Stroke (mm) | 75 |
| CXN8075-S2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN8075-S2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN8075-S2PN-CD-P1 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN8075-S2PN-CD-P1 | Main Unit Weight (Kg) | 1.84 |
| CXN8075-S2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN8075-S2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN8075-S2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN8075-S2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN8075-S2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN8075-S2PN-CD-P1 | Positioning Presion (µm) | 7 |
| CXN8075-S2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN8075-S2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN8075-S2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN8075-S2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN8075-S2PN-CD-P1 | Dynamic Straightness (µm) | 2 |
| CXN8075-S2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN8075-S2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8075-S2PN-CD-P1 | Brand / Model | SANYO / SH5281-7211 |
| CXN8075-S2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN8075-S2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8075-S2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8075-S2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8075-S2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8075-S2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN8075-S2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN8075-S2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8075-F2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN8075-F2PN-CD-P1 | Travel Stroke (mm) | 75 |
| CXN8075-F2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN8075-F2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN8075-F2PN-CD-P1 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN8075-F2PN-CD-P1 | Main Unit Weight (Kg) | 1.84 |
| CXN8075-F2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN8075-F2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN8075-F2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN8075-F2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN8075-F2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN8075-F2PN-CD-P1 | Positioning Presion (µm) | 7 |
| CXN8075-F2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN8075-F2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN8075-F2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN8075-F2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN8075-F2PN-CD-P1 | Dynamic Straightness (µm) | 2 |
| CXN8075-F2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN8075-F2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8075-F2PN-CD-P1 | Brand / Model | SANYO / SH5281-7211 |
| CXN8075-F2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN8075-F2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8075-F2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8075-F2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8075-F2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8075-F2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN8075-F2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN8075-F2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8075-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN8075-S2PN-CD-P2 | Travel Stroke (mm) | 75 |
| CXN8075-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN8075-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN8075-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN8075-S2PN-CD-P2 | Main Unit Weight (Kg) | 1.84 |
| CXN8075-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN8075-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN8075-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN8075-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN8075-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN8075-S2PN-CD-P2 | Positioning Presion (µm) | 7 |
| CXN8075-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN8075-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN8075-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN8075-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN8075-S2PN-CD-P2 | Dynamic Straightness (µm) | 2 |
| CXN8075-S2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN8075-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8075-S2PN-CD-P2 | Brand / Model | SANYO / SH5281-7211 |
| CXN8075-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN8075-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8075-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8075-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8075-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8075-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN8075-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN8075-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN8075-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN8075-F2PN-CD-P2 | Travel Stroke (mm) | 75 |
| CXN8075-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN8075-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN8075-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN8075-F2PN-CD-P2 | Main Unit Weight (Kg) | 1.84 |
| CXN8075-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN8075-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN8075-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN8075-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN8075-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN8075-F2PN-CD-P2 | Positioning Presion (µm) | 7 |
| CXN8075-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN8075-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN8075-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN8075-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN8075-F2PN-CD-P2 | Dynamic Straightness (µm) | 2 |
| CXN8075-F2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN8075-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN8075-F2PN-CD-P2 | Brand / Model | SANYO / SH5281-7211 |
| CXN8075-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN8075-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN8075-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN8075-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN8075-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor / N / A |
| CXN8075-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN8075-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN8075-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| Model No. | Specification | Value |
|---|---|---|
| CXN80100-S2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN80100-S2PN-CD-P1 | Travel Stroke (mm) | 100 |
| CXN80100-S2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN80100-S2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN80100-S2PN-CD-P1 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80100-S2PN-CD-P1 | Main Unit Weight (Kg) | 2.02 |
| CXN80100-S2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN80100-S2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN80100-S2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN80100-S2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN80100-S2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN80100-S2PN-CD-P1 | Positioning Presion (µm) | 10 |
| CXN80100-S2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN80100-S2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN80100-S2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN80100-S2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN80100-S2PN-CD-P1 | Dynamic Straightness (µm) | 4 |
| CXN80100-S2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN80100-S2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80100-S2PN-CD-P1 | Brand / Model | SANYO / SH5285-7211 |
| CXN80100-S2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN80100-S2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80100-S2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80100-S2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80100-S2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor |
| CXN80100-S2PN-CD-P1 | Limit Sensor | N / A |
| CXN80100-S2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN80100-S2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN80100-S2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80100-F2PN-CD-P1 | Table Size (mm) | 80 × 80 |
| CXN80100-F2PN-CD-P1 | Travel Stroke (mm) | 100 |
| CXN80100-F2PN-CD-P1 | Drive Type | Ball screw Ø8 lead 1 mm |
| CXN80100-F2PN-CD-P1 | Rail | Circular Linear Ball Guiding |
| CXN80100-F2PN-CD-P1 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80100-F2PN-CD-P1 | Main Unit Weight (Kg) | 2.02 |
| CXN80100-F2PN-CD-P1 | Coupling | FAMCS11.6-5*5 |
| CXN80100-F2PN-CD-P1 | Accuracy Level | P：Precision grade |
| CXN80100-F2PN-CD-P1 | Wiring Method | N：GMT Standard |
| CXN80100-F2PN-CD-P1 | Resolution (Pulse) (µm) | 2 (Full) / 1 (Half) |
| CXN80100-F2PN-CD-P1 | Max. Speed (Full Step) (mm / sec) | 20 |
| CXN80100-F2PN-CD-P1 | Positioning Presion (µm) | 10 |
| CXN80100-F2PN-CD-P1 | Repeatability Precision (µm) | ±0.5 |
| CXN80100-F2PN-CD-P1 | Load Capacity (Kgf) | 18 |
| CXN80100-F2PN-CD-P1 | Missed Step (µm) | 1 |
| CXN80100-F2PN-CD-P1 | Parallelism (µm) | 20 |
| CXN80100-F2PN-CD-P1 | Dynamic Straightness (µm) | 4 |
| CXN80100-F2PN-CD-P1 | Dynamic Parallelism (µm) | 10 |
| CXN80100-F2PN-CD-P1 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80100-F2PN-CD-P1 | Brand / Model | SANYO / SH5285-7211 |
| CXN80100-F2PN-CD-P1 | Driver Brand / Model | Please refer to reference table |
| CXN80100-F2PN-CD-P1 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80100-F2PN-CD-P1 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80100-F2PN-CD-P1 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80100-F2PN-CD-P1 | Limit Sensor | Origin Approximation Sensor |
| CXN80100-F2PN-CD-P1 | Limit Sensor | N / A |
| CXN80100-F2PN-CD-P1 | Power Voltage | 24V ± 10% |
| CXN80100-F2PN-CD-P1 | Control Output | NPN open collector output under 24V 8mA |
| CXN80100-F2PN-CD-P1 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80100-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80100-S2PN-CD-P2 | Travel Stroke (mm) | 100 |
| CXN80100-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80100-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80100-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80100-S2PN-CD-P2 | Main Unit Weight (Kg) | 2.02 |
| CXN80100-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80100-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80100-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80100-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80100-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80100-S2PN-CD-P2 | Positioning Presion (µm) | 10 |
| CXN80100-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80100-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80100-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80100-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80100-S2PN-CD-P2 | Dynamic Straightness (µm) | 4 |
| CXN80100-S2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN80100-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80100-S2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80100-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80100-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80100-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80100-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80100-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80100-S2PN-CD-P2 | Limit Sensor | N / A |
| CXN80100-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80100-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80100-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80100-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80100-F2PN-CD-P2 | Travel Stroke (mm) | 100 |
| CXN80100-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80100-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80100-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80100-F2PN-CD-P2 | Main Unit Weight (Kg) | 2.02 |
| CXN80100-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80100-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80100-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80100-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80100-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80100-F2PN-CD-P2 | Positioning Presion (µm) | 10 |
| CXN80100-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80100-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80100-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80100-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80100-F2PN-CD-P2 | Dynamic Straightness (µm) | 4 |
| CXN80100-F2PN-CD-P2 | Dynamic Parallelism (µm) | 10 |
| CXN80100-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80100-F2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80100-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80100-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80100-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80100-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80100-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80100-F2PN-CD-P2 | Limit Sensor | N / A |
| CXN80100-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80100-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80100-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80150-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80150-S2PN-CD-P2 | Travel Stroke (mm) | 150 |
| CXN80150-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80150-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80150-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80150-S2PN-CD-P2 | Main Unit Weight (Kg) | 2.32 |
| CXN80150-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80150-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80150-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80150-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80150-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80150-S2PN-CD-P2 | Positioning Presion (µm) | 15 |
| CXN80150-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80150-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80150-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80150-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80150-S2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80150-S2PN-CD-P2 | Dynamic Parallelism (µm) | 15 |
| CXN80150-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80150-S2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80150-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80150-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80150-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80150-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80150-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80150-S2PN-CD-P2 | Limit Sensor | N / A |
| CXN80150-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80150-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80150-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80150-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80150-F2PN-CD-P2 | Travel Stroke (mm) | 150 |
| CXN80150-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80150-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80150-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80150-F2PN-CD-P2 | Main Unit Weight (Kg) | 2.32 |
| CXN80150-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80150-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80150-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80150-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80150-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80150-F2PN-CD-P2 | Positioning Presion (µm) | 15 |
| CXN80150-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80150-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80150-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80150-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80150-F2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80150-F2PN-CD-P2 | Dynamic Parallelism (µm) | 15 |
| CXN80150-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80150-F2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80150-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80150-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80150-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80150-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80150-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80150-F2PN-CD-P2 | Limit Sensor | N / A |
| CXN80150-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80150-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80150-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80150-S2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80150-S2PN-CD-P4 | Travel Stroke (mm) | 150 |
| CXN80150-S2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80150-S2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80150-S2PN-CD-P4 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80150-S2PN-CD-P4 | Main Unit Weight (Kg) | 2.32 |
| CXN80150-S2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80150-S2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80150-S2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80150-S2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80150-S2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80150-S2PN-CD-P4 | Positioning Presion (µm) | 15 |
| CXN80150-S2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80150-S2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80150-S2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80150-S2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80150-S2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80150-S2PN-CD-P4 | Dynamic Parallelism (µm) | 15 |
| CXN80150-S2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80150-S2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80150-S2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80150-S2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80150-S2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80150-S2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80150-S2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80150-S2PN-CD-P4 | Limit Sensor | N / A |
| CXN80150-S2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80150-S2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80150-S2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80150-F2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80150-F2PN-CD-P4 | Travel Stroke (mm) | 150 |
| CXN80150-F2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80150-F2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80150-F2PN-CD-P4 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80150-F2PN-CD-P4 | Main Unit Weight (Kg) | 2.32 |
| CXN80150-F2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80150-F2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80150-F2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80150-F2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80150-F2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80150-F2PN-CD-P4 | Positioning Presion (µm) | 15 |
| CXN80150-F2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80150-F2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80150-F2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80150-F2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80150-F2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80150-F2PN-CD-P4 | Dynamic Parallelism (µm) | 15 |
| CXN80150-F2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80150-F2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80150-F2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80150-F2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80150-F2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80150-F2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80150-F2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80150-F2PN-CD-P4 | Limit Sensor | N / A |
| CXN80150-F2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80150-F2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80150-F2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80200-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80200-S2PN-CD-P2 | Travel Stroke (mm) | 200 |
| CXN80200-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80200-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80200-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80200-S2PN-CD-P2 | Main Unit Weight (Kg) | 2.6 |
| CXN80200-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80200-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80200-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80200-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80200-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80200-S2PN-CD-P2 | Positioning Presion (µm) | 15 |
| CXN80200-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80200-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80200-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80200-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80200-S2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80200-S2PN-CD-P2 | Dynamic Parallelism (µm) | 15 |
| CXN80200-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80200-S2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80200-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80200-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80200-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80200-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80200-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80200-S2PN-CD-P2 | Limit Sensor | N / A |
| CXN80200-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80200-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80200-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80200-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80200-F2PN-CD-P2 | Travel Stroke (mm) | 200 |
| CXN80200-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80200-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80200-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80200-F2PN-CD-P2 | Main Unit Weight (Kg) | 2.6 |
| CXN80200-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80200-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80200-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80200-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80200-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80200-F2PN-CD-P2 | Positioning Presion (µm) | 15 |
| CXN80200-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80200-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80200-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80200-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80200-F2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80200-F2PN-CD-P2 | Dynamic Parallelism (µm) | 15 |
| CXN80200-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80200-F2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80200-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80200-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80200-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80200-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80200-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80200-F2PN-CD-P2 | Limit Sensor | N / A |
| CXN80200-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80200-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80200-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80200-S2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80200-S2PN-CD-P4 | Travel Stroke (mm) | 200 |
| CXN80200-S2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80200-S2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80200-S2PN-CD-P4 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80200-S2PN-CD-P4 | Main Unit Weight (Kg) | 2.6 |
| CXN80200-S2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80200-S2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80200-S2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80200-S2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80200-S2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80200-S2PN-CD-P4 | Positioning Presion (µm) | 15 |
| CXN80200-S2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80200-S2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80200-S2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80200-S2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80200-S2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80200-S2PN-CD-P4 | Dynamic Parallelism (µm) | 15 |
| CXN80200-S2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80200-S2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80200-S2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80200-S2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80200-S2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80200-S2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80200-S2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80200-S2PN-CD-P4 | Limit Sensor | N / A |
| CXN80200-S2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80200-S2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80200-S2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80200-F2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80200-F2PN-CD-P4 | Travel Stroke (mm) | 200 |
| CXN80200-F2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80200-F2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80200-F2PN-CD-P4 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80200-F2PN-CD-P4 | Main Unit Weight (Kg) | 2.6 |
| CXN80200-F2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80200-F2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80200-F2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80200-F2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80200-F2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80200-F2PN-CD-P4 | Positioning Presion (µm) | 15 |
| CXN80200-F2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80200-F2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80200-F2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80200-F2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80200-F2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80200-F2PN-CD-P4 | Dynamic Parallelism (µm) | 15 |
| CXN80200-F2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80200-F2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80200-F2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80200-F2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80200-F2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80200-F2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80200-F2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80200-F2PN-CD-P4 | Limit Sensor | N / A |
| CXN80200-F2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80200-F2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80200-F2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80250-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80250-S2PN-CD-P2 | Travel Stroke (mm) | 250 |
| CXN80250-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80250-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80250-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80250-S2PN-CD-P2 | Main Unit Weight (Kg) | 2.9 |
| CXN80250-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80250-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80250-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80250-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80250-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80250-S2PN-CD-P2 | Positioning Presion (µm) | 25 |
| CXN80250-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80250-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80250-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80250-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80250-S2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80250-S2PN-CD-P2 | Dynamic Parallelism (µm) | 25 |
| CXN80250-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80250-S2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80250-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80250-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80250-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80250-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80250-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80250-S2PN-CD-P2 | Limit Sensor | N / A |
| CXN80250-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80250-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80250-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80250-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80250-F2PN-CD-P2 | Travel Stroke (mm) | 250 |
| CXN80250-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80250-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80250-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80250-F2PN-CD-P2 | Main Unit Weight (Kg) | 2.9 |
| CXN80250-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80250-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80250-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80250-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80250-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80250-F2PN-CD-P2 | Positioning Presion (µm) | 25 |
| CXN80250-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80250-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80250-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80250-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80250-F2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80250-F2PN-CD-P2 | Dynamic Parallelism (µm) | 25 |
| CXN80250-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80250-F2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80250-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80250-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80250-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80250-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80250-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80250-F2PN-CD-P2 | Limit Sensor | N / A |
| CXN80250-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80250-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80250-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80250-S2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80250-S2PN-CD-P4 | Travel Stroke (mm) | 250 |
| CXN80250-S2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80250-S2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80250-S2PN-CD-P4 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80250-S2PN-CD-P4 | Main Unit Weight (Kg) | 2.9 |
| CXN80250-S2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80250-S2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80250-S2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80250-S2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80250-S2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80250-S2PN-CD-P4 | Positioning Presion (µm) | 25 |
| CXN80250-S2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80250-S2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80250-S2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80250-S2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80250-S2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80250-S2PN-CD-P4 | Dynamic Parallelism (µm) | 25 |
| CXN80250-S2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80250-S2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80250-S2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80250-S2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80250-S2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80250-S2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80250-S2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80250-S2PN-CD-P4 | Limit Sensor | N / A |
| CXN80250-S2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80250-S2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80250-S2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80250-F2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80250-F2PN-CD-P4 | Travel Stroke (mm) | 250 |
| CXN80250-F2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80250-F2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80250-F2PN-CD-P4 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80250-F2PN-CD-P4 | Main Unit Weight (Kg) | 2.9 |
| CXN80250-F2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80250-F2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80250-F2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80250-F2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80250-F2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80250-F2PN-CD-P4 | Positioning Presion (µm) | 25 |
| CXN80250-F2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80250-F2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80250-F2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80250-F2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80250-F2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80250-F2PN-CD-P4 | Dynamic Parallelism (µm) | 25 |
| CXN80250-F2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80250-F2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80250-F2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80250-F2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80250-F2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80250-F2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80250-F2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80250-F2PN-CD-P4 | Limit Sensor | N / A |
| CXN80250-F2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80250-F2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80250-F2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80300-S2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80300-S2PN-CD-P2 | Travel Stroke (mm) | 300 |
| CXN80300-S2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80300-S2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80300-S2PN-CD-P2 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80300-S2PN-CD-P2 | Main Unit Weight (Kg) | 3.2 |
| CXN80300-S2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80300-S2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80300-S2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80300-S2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80300-S2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80300-S2PN-CD-P2 | Positioning Presion (µm) | 25 |
| CXN80300-S2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80300-S2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80300-S2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80300-S2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80300-S2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80300-S2PN-CD-P2 | Dynamic Parallelism (µm) | 25 |
| CXN80300-S2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80300-S2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80300-S2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80300-S2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80300-S2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80300-S2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80300-S2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80300-S2PN-CD-P2 | Limit Sensor | N / A |
| CXN80300-S2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80300-S2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80300-S2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80300-F2PN-CD-P2 | Table Size (mm) | 80 × 80 |
| CXN80300-F2PN-CD-P2 | Travel Stroke (mm) | 300 |
| CXN80300-F2PN-CD-P2 | Drive Type | Ball screw Ø8 lead 2 mm |
| CXN80300-F2PN-CD-P2 | Rail | Circular Linear Ball Guiding |
| CXN80300-F2PN-CD-P2 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80300-F2PN-CD-P2 | Main Unit Weight (Kg) | 3.2 |
| CXN80300-F2PN-CD-P2 | Coupling | FAMCS11.6-5*5 |
| CXN80300-F2PN-CD-P2 | Accuracy Level | P：Precision grade |
| CXN80300-F2PN-CD-P2 | Wiring Method | N：GMT Standard |
| CXN80300-F2PN-CD-P2 | Resolution (Pulse) (µm) | 4 (Full) / 2 (Half) |
| CXN80300-F2PN-CD-P2 | Max. Speed (Full Step) (mm / sec) | 40 |
| CXN80300-F2PN-CD-P2 | Positioning Presion (µm) | 25 |
| CXN80300-F2PN-CD-P2 | Repeatability Precision (µm) | ±0.5 |
| CXN80300-F2PN-CD-P2 | Load Capacity (Kgf) | 18 |
| CXN80300-F2PN-CD-P2 | Missed Step (µm) | 1 |
| CXN80300-F2PN-CD-P2 | Parallelism (µm) | 20 |
| CXN80300-F2PN-CD-P2 | Dynamic Straightness (µm) | 6 |
| CXN80300-F2PN-CD-P2 | Dynamic Parallelism (µm) | 25 |
| CXN80300-F2PN-CD-P2 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80300-F2PN-CD-P2 | Brand / Model | SANYO / SH5285-7211 |
| CXN80300-F2PN-CD-P2 | Driver Brand / Model | Please refer to reference table |
| CXN80300-F2PN-CD-P2 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80300-F2PN-CD-P2 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80300-F2PN-CD-P2 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80300-F2PN-CD-P2 | Limit Sensor | Origin Approximation Sensor |
| CXN80300-F2PN-CD-P2 | Limit Sensor | N / A |
| CXN80300-F2PN-CD-P2 | Power Voltage | 24V ± 10% |
| CXN80300-F2PN-CD-P2 | Control Output | NPN open collector output under 24V 8mA |
| CXN80300-F2PN-CD-P2 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80300-S2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80300-S2PN-CD-P4 | Travel Stroke (mm) | 300 |
| CXN80300-S2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80300-S2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80300-S2PN-CD-P4 | Stage Material / Surface Treatment | S：Stainless Steel / Nickel Plating |
| CXN80300-S2PN-CD-P4 | Main Unit Weight (Kg) | 3.2 |
| CXN80300-S2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80300-S2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80300-S2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80300-S2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80300-S2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80300-S2PN-CD-P4 | Positioning Presion (µm) | 25 |
| CXN80300-S2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80300-S2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80300-S2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80300-S2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80300-S2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80300-S2PN-CD-P4 | Dynamic Parallelism (µm) | 25 |
| CXN80300-S2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80300-S2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80300-S2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80300-S2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80300-S2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80300-S2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80300-S2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80300-S2PN-CD-P4 | Limit Sensor | N / A |
| CXN80300-S2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80300-S2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80300-S2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| CXN80300-F2PN-CD-P4 | Table Size (mm) | 80 × 80 |
| CXN80300-F2PN-CD-P4 | Travel Stroke (mm) | 300 |
| CXN80300-F2PN-CD-P4 | Drive Type | Ball screw Ø8 lead 4 mm |
| CXN80300-F2PN-CD-P4 | Rail | Circular Linear Ball Guiding |
| CXN80300-F2PN-CD-P4 | Stage Material / Surface Treatment | F：Carbon Steel / Nickel Plating |
| CXN80300-F2PN-CD-P4 | Main Unit Weight (Kg) | 3.2 |
| CXN80300-F2PN-CD-P4 | Coupling | FAMCS11.6-5*5 |
| CXN80300-F2PN-CD-P4 | Accuracy Level | P：Precision grade |
| CXN80300-F2PN-CD-P4 | Wiring Method | N：GMT Standard |
| CXN80300-F2PN-CD-P4 | Resolution (Pulse) (µm) | 8 (Full) / 4 (Half) |
| CXN80300-F2PN-CD-P4 | Max. Speed (Full Step) (mm / sec) | 80 |
| CXN80300-F2PN-CD-P4 | Positioning Presion (µm) | 25 |
| CXN80300-F2PN-CD-P4 | Repeatability Precision (µm) | ±0.5 |
| CXN80300-F2PN-CD-P4 | Load Capacity (Kgf) | 18 |
| CXN80300-F2PN-CD-P4 | Missed Step (µm) | 1 |
| CXN80300-F2PN-CD-P4 | Parallelism (µm) | 20 |
| CXN80300-F2PN-CD-P4 | Dynamic Straightness (µm) | 6 |
| CXN80300-F2PN-CD-P4 | Dynamic Parallelism (µm) | 25 |
| CXN80300-F2PN-CD-P4 | Type / Shaft Numbers | 5-phase stepper / ☐ 28 double shafts |
| CXN80300-F2PN-CD-P4 | Brand / Model | SANYO / SH5285-7211 |
| CXN80300-F2PN-CD-P4 | Driver Brand / Model | Please refer to reference table |
| CXN80300-F2PN-CD-P4 | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| CXN80300-F2PN-CD-P4 | Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
| CXN80300-F2PN-CD-P4 | Origin Sensor | Photoelectric sensor GMT-sensor |
| CXN80300-F2PN-CD-P4 | Limit Sensor | Origin Approximation Sensor |
| CXN80300-F2PN-CD-P4 | Limit Sensor | N / A |
| CXN80300-F2PN-CD-P4 | Power Voltage | 24V ± 10% |
| CXN80300-F2PN-CD-P4 | Control Output | NPN open collector output under 24V 8mA |
| CXN80300-F2PN-CD-P4 | Output Control | Testing (sensing)：output transistor OFF (closed) |
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Inquiry - CXN80 - Precision
