Share:
★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel
|
Model No. |
Specification |
Value |
|---|---|---|
|
CXN6030-S2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN6030-S2PN-CD-P1 |
Travel Stroke (mm) |
30 |
|
CXN6030-S2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN6030-S2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN6030-S2PN-CD-P1 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN6030-S2PN-CD-P1 |
Main Unit Weight (Kg) |
1.1 |
|
CXN6030-S2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6030-S2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN6030-S2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN6030-S2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN6030-S2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN6030-S2PN-CD-P1 |
Positioning Presion (µm) |
5 |
|
CXN6030-S2PN-CD-P1 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6030-S2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN6030-S2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN6030-S2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN6030-S2PN-CD-P1 |
Dynamic Straightness (µm) |
2 |
|
CXN6030-S2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN6030-S2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6030-S2PN-CD-P1 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6030-S2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6030-S2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6030-S2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6030-S2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6030-S2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6030-S2PN-CD-P1 |
Limit Sensor |
N / A |
|
CXN6030-S2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN6030-S2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6030-S2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6030-F2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN6030-F2PN-CD-P1 |
Travel Stroke (mm) |
30 |
|
CXN6030-F2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN6030-F2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN6030-F2PN-CD-P1 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN6030-F2PN-CD-P1 |
Main Unit Weight (Kg) |
1.1 |
|
CXN6030-F2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6030-F2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN6030-F2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN6030-F2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN6030-F2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN6030-F2PN-CD-P1 |
Positioning Presion (µm) |
5 |
|
CXN6030-F2PN-CD-P1 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6030-F2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN6030-F2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN6030-F2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN6030-F2PN-CD-P1 |
Dynamic Straightness (µm) |
2 |
|
CXN6030-F2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN6030-F2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6030-F2PN-CD-P1 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6030-F2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6030-F2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6030-F2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6030-F2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6030-F2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6030-F2PN-CD-P1 |
Limit Sensor |
N / A |
|
CXN6030-F2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN6030-F2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6030-F2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6030-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN6030-S2PN-CD-P2 |
Travel Stroke (mm) |
30 |
|
CXN6030-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN6030-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN6030-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN6030-S2PN-CD-P2 |
Main Unit Weight (Kg) |
1.1 |
|
CXN6030-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6030-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN6030-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN6030-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN6030-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN6030-S2PN-CD-P2 |
Positioning Presion (µm) |
5 |
|
CXN6030-S2PN-CD-P2 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6030-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN6030-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN6030-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN6030-S2PN-CD-P2 |
Dynamic Straightness (µm) |
2 |
|
CXN6030-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN6030-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6030-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6030-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6030-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6030-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6030-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6030-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6030-S2PN-CD-P2 |
Limit Sensor |
N / A |
|
CXN6030-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN6030-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6030-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6030-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN6030-F2PN-CD-P2 |
Travel Stroke (mm) |
30 |
|
CXN6030-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN6030-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN6030-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN6030-F2PN-CD-P2 |
Main Unit Weight (Kg) |
1.1 |
|
CXN6030-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6030-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN6030-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN6030-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN6030-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN6030-F2PN-CD-P2 |
Positioning Presion (µm) |
5 |
|
CXN6030-F2PN-CD-P2 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6030-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN6030-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN6030-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN6030-F2PN-CD-P2 |
Dynamic Straightness (µm) |
2 |
|
CXN6030-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN6030-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6030-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6030-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6030-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6030-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6030-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6030-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6030-F2PN-CD-P2 |
Limit Sensor |
N / A |
|
CXN6030-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN6030-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6030-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6050-S2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN6050-S2PN-CD-P1 |
Travel Stroke (mm) |
50 |
|
CXN6050-S2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN6050-S2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN6050-S2PN-CD-P1 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN6050-S2PN-CD-P1 |
Main Unit Weight (Kg) |
1.19 |
|
CXN6050-S2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6050-S2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN6050-S2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN6050-S2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN6050-S2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN6050-S2PN-CD-P1 |
Positioning Presion (µm) |
5 |
|
CXN6050-S2PN-CD-P1 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6050-S2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN6050-S2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN6050-S2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN6050-S2PN-CD-P1 |
Dynamic Straightness (µm) |
2 |
|
CXN6050-S2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN6050-S2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6050-S2PN-CD-P1 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6050-S2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6050-S2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6050-S2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6050-S2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6050-S2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6050-S2PN-CD-P1 |
Limit Sensor |
N / A |
|
CXN6050-S2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN6050-S2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6050-S2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6050-F2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN6050-F2PN-CD-P1 |
Travel Stroke (mm) |
50 |
|
CXN6050-F2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN6050-F2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN6050-F2PN-CD-P1 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN6050-F2PN-CD-P1 |
Main Unit Weight (Kg) |
1.19 |
|
CXN6050-F2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6050-F2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN6050-F2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN6050-F2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN6050-F2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN6050-F2PN-CD-P1 |
Positioning Presion (µm) |
5 |
|
CXN6050-F2PN-CD-P1 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6050-F2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN6050-F2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN6050-F2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN6050-F2PN-CD-P1 |
Dynamic Straightness (µm) |
2 |
|
CXN6050-F2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN6050-F2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6050-F2PN-CD-P1 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6050-F2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6050-F2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6050-F2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6050-F2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6050-F2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6050-F2PN-CD-P1 |
Limit Sensor |
N / A |
|
CXN6050-F2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN6050-F2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6050-F2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6050-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN6050-S2PN-CD-P2 |
Travel Stroke (mm) |
50 |
|
CXN6050-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN6050-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN6050-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN6050-S2PN-CD-P2 |
Main Unit Weight (Kg) |
1.19 |
|
CXN6050-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6050-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN6050-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN6050-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN6050-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN6050-S2PN-CD-P2 |
Positioning Presion (µm) |
5 |
|
CXN6050-S2PN-CD-P2 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6050-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN6050-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN6050-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN6050-S2PN-CD-P2 |
Dynamic Straightness (µm) |
2 |
|
CXN6050-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN6050-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6050-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6050-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6050-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6050-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6050-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6050-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6050-S2PN-CD-P2 |
Limit Sensor |
N / A |
|
CXN6050-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN6050-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6050-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6050-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN6050-F2PN-CD-P2 |
Travel Stroke (mm) |
50 |
|
CXN6050-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN6050-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN6050-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN6050-F2PN-CD-P2 |
Main Unit Weight (Kg) |
1.19 |
|
CXN6050-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6050-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN6050-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN6050-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN6050-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN6050-F2PN-CD-P2 |
Positioning Presion (µm) |
5 |
|
CXN6050-F2PN-CD-P2 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6050-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN6050-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN6050-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN6050-F2PN-CD-P2 |
Dynamic Straightness (µm) |
2 |
|
CXN6050-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN6050-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6050-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6050-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6050-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6050-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6050-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6050-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6050-F2PN-CD-P2 |
Limit Sensor |
N / A |
|
CXN6050-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN6050-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6050-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6075-S2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN6075-S2PN-CD-P1 |
Travel Stroke (mm) |
75 |
|
CXN6075-S2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN6075-S2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN6075-S2PN-CD-P1 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN6075-S2PN-CD-P1 |
Main Unit Weight (Kg) |
1.3 |
|
CXN6075-S2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6075-S2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN6075-S2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN6075-S2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN6075-S2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN6075-S2PN-CD-P1 |
Positioning Presion (µm) |
7 |
|
CXN6075-S2PN-CD-P1 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6075-S2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN6075-S2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN6075-S2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN6075-S2PN-CD-P1 |
Dynamic Straightness (µm) |
2 |
|
CXN6075-S2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN6075-S2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6075-S2PN-CD-P1 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6075-S2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6075-S2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6075-S2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6075-S2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6075-S2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6075-S2PN-CD-P1 |
Limit Sensor |
N / A |
|
CXN6075-S2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN6075-S2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6075-S2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6075-F2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN6075-F2PN-CD-P1 |
Travel Stroke (mm) |
75 |
|
CXN6075-F2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN6075-F2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN6075-F2PN-CD-P1 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN6075-F2PN-CD-P1 |
Main Unit Weight (Kg) |
1.3 |
|
CXN6075-F2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6075-F2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN6075-F2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN6075-F2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN6075-F2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN6075-F2PN-CD-P1 |
Positioning Presion (µm) |
7 |
|
CXN6075-F2PN-CD-P1 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6075-F2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN6075-F2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN6075-F2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN6075-F2PN-CD-P1 |
Dynamic Straightness (µm) |
2 |
|
CXN6075-F2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN6075-F2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6075-F2PN-CD-P1 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6075-F2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6075-F2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6075-F2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6075-F2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6075-F2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6075-F2PN-CD-P1 |
Limit Sensor |
N / A |
|
CXN6075-F2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN6075-F2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6075-F2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6075-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN6075-S2PN-CD-P2 |
Travel Stroke (mm) |
75 |
|
CXN6075-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN6075-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN6075-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN6075-S2PN-CD-P2 |
Main Unit Weight (Kg) |
1.3 |
|
CXN6075-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6075-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN6075-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN6075-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN6075-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN6075-S2PN-CD-P2 |
Positioning Presion (µm) |
7 |
|
CXN6075-S2PN-CD-P2 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6075-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN6075-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN6075-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN6075-S2PN-CD-P2 |
Dynamic Straightness (µm) |
2 |
|
CXN6075-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN6075-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6075-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6075-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6075-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6075-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6075-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6075-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6075-S2PN-CD-P2 |
Limit Sensor |
N / A |
|
CXN6075-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN6075-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6075-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN6075-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN6075-F2PN-CD-P2 |
Travel Stroke (mm) |
75 |
|
CXN6075-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN6075-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN6075-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN6075-F2PN-CD-P2 |
Main Unit Weight (Kg) |
1.3 |
|
CXN6075-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN6075-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN6075-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN6075-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN6075-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN6075-F2PN-CD-P2 |
Positioning Presion (µm) |
7 |
|
CXN6075-F2PN-CD-P2 |
Repeatability Precision (µm) |
± 0.5 |
|
CXN6075-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN6075-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN6075-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN6075-F2PN-CD-P2 |
Dynamic Straightness (µm) |
2 |
|
CXN6075-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN6075-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN6075-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5281-7211 |
|
CXN6075-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN6075-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN6075-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN6075-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN6075-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor |
|
CXN6075-F2PN-CD-P2 |
Limit Sensor |
N / A |
|
CXN6075-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN6075-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN6075-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
Model No. |
Specification |
Value |
|---|---|---|
|
CXN60100-S2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN60100-S2PN-CD-P1 |
Travel Stroke (mm) |
100 |
|
CXN60100-S2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN60100-S2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN60100-S2PN-CD-P1 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60100-S2PN-CD-P1 |
Main Unit Weight (Kg) |
1.47 |
|
CXN60100-S2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60100-S2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN60100-S2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN60100-S2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN60100-S2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN60100-S2PN-CD-P1 |
Positioning Presion (µm) |
10 |
|
CXN60100-S2PN-CD-P1 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60100-S2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN60100-S2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN60100-S2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN60100-S2PN-CD-P1 |
Dynamic Straightness (µm) |
4 |
|
CXN60100-S2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN60100-S2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60100-S2PN-CD-P1 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60100-S2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60100-S2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60100-S2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60100-S2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60100-S2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60100-S2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN60100-S2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60100-S2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60100-F2PN-CD-P1 |
Table Size (mm) |
60 × 60 |
|
CXN60100-F2PN-CD-P1 |
Travel Stroke (mm) |
100 |
|
CXN60100-F2PN-CD-P1 |
Drive Type |
Ball screw Ø8 lead 1 mm |
|
CXN60100-F2PN-CD-P1 |
Rail |
Circular Linear Ball Guiding |
|
CXN60100-F2PN-CD-P1 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60100-F2PN-CD-P1 |
Main Unit Weight (Kg) |
1.47 |
|
CXN60100-F2PN-CD-P1 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60100-F2PN-CD-P1 |
Accuracy Level |
P：Precision grade |
|
CXN60100-F2PN-CD-P1 |
Wiring Method |
N：GMT Standard |
|
CXN60100-F2PN-CD-P1 |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXN60100-F2PN-CD-P1 |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXN60100-F2PN-CD-P1 |
Positioning Presion (µm) |
10 |
|
CXN60100-F2PN-CD-P1 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60100-F2PN-CD-P1 |
Load Capacity (Kgf) |
14 |
|
CXN60100-F2PN-CD-P1 |
Missed Step (µm) |
1 |
|
CXN60100-F2PN-CD-P1 |
Parallelism (µm) |
20 |
|
CXN60100-F2PN-CD-P1 |
Dynamic Straightness (µm) |
4 |
|
CXN60100-F2PN-CD-P1 |
Dynamic Parallelism (µm) |
10 |
|
CXN60100-F2PN-CD-P1 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60100-F2PN-CD-P1 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60100-F2PN-CD-P1 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60100-F2PN-CD-P1 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60100-F2PN-CD-P1 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60100-F2PN-CD-P1 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60100-F2PN-CD-P1 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60100-F2PN-CD-P1 |
Power Voltage |
24V ± 10% |
|
CXN60100-F2PN-CD-P1 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60100-F2PN-CD-P1 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60100-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60100-S2PN-CD-P2 |
Travel Stroke (mm) |
100 |
|
CXN60100-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60100-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60100-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60100-S2PN-CD-P2 |
Main Unit Weight (Kg) |
1.47 |
|
CXN60100-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60100-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60100-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60100-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60100-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60100-S2PN-CD-P2 |
Positioning Presion (µm) |
10 |
|
CXN60100-S2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60100-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60100-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60100-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60100-S2PN-CD-P2 |
Dynamic Straightness (µm) |
4 |
|
CXN60100-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN60100-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60100-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60100-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60100-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60100-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60100-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60100-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60100-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60100-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60100-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60100-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60100-F2PN-CD-P2 |
Travel Stroke (mm) |
100 |
|
CXN60100-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60100-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60100-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60100-F2PN-CD-P2 |
Main Unit Weight (Kg) |
1.47 |
|
CXN60100-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60100-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60100-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60100-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60100-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60100-F2PN-CD-P2 |
Positioning Presion (µm) |
10 |
|
CXN60100-F2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60100-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60100-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60100-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60100-F2PN-CD-P2 |
Dynamic Straightness (µm) |
4 |
|
CXN60100-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN60100-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60100-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60100-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60100-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60100-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60100-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60100-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60100-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60100-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60100-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60150-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60150-S2PN-CD-P2 |
Travel Stroke (mm) |
150 |
|
CXN60150-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60150-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60150-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60150-S2PN-CD-P2 |
Main Unit Weight (Kg) |
1.8 |
|
CXN60150-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60150-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60150-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60150-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60150-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60150-S2PN-CD-P2 |
Positioning Presion (µm) |
15 |
|
CXN60150-S2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60150-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60150-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60150-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60150-S2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60150-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN60150-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60150-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60150-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60150-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60150-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60150-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60150-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60150-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60150-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60150-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60150-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60150-F2PN-CD-P2 |
Travel Stroke (mm) |
150 |
|
CXN60150-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60150-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60150-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60150-F2PN-CD-P2 |
Main Unit Weight (Kg) |
1.8 |
|
CXN60150-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60150-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60150-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60150-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60150-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60150-F2PN-CD-P2 |
Positioning Presion (µm) |
15 |
|
CXN60150-F2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60150-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60150-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60150-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60150-F2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60150-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
10 |
|
CXN60150-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60150-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60150-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60150-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60150-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60150-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60150-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60150-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60150-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60150-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60150-S2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60150-S2PN-CD-P4 |
Travel Stroke (mm) |
150 |
|
CXN60150-S2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60150-S2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60150-S2PN-CD-P4 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60150-S2PN-CD-P4 |
Main Unit Weight (Kg) |
1.8 |
|
CXN60150-S2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60150-S2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60150-S2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60150-S2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60150-S2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60150-S2PN-CD-P4 |
Positioning Presion (µm) |
15 |
|
CXN60150-S2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60150-S2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60150-S2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60150-S2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60150-S2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60150-S2PN-CD-P4 |
Dynamic Parallelism (µm) |
10 |
|
CXN60150-S2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60150-S2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60150-S2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60150-S2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60150-S2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60150-S2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60150-S2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60150-S2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60150-S2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60150-S2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60150-F2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60150-F2PN-CD-P4 |
Travel Stroke (mm) |
150 |
|
CXN60150-F2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60150-F2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60150-F2PN-CD-P4 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60150-F2PN-CD-P4 |
Main Unit Weight (Kg) |
1.8 |
|
CXN60150-F2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60150-F2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60150-F2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60150-F2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60150-F2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60150-F2PN-CD-P4 |
Positioning Presion (µm) |
15 |
|
CXN60150-F2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60150-F2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60150-F2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60150-F2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60150-F2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60150-F2PN-CD-P4 |
Dynamic Parallelism (µm) |
10 |
|
CXN60150-F2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60150-F2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60150-F2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60150-F2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60150-F2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60150-F2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60150-F2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60150-F2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60150-F2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60150-F2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60200-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60200-S2PN-CD-P2 |
Travel Stroke (mm) |
200 |
|
CXN60200-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60200-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60200-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60200-S2PN-CD-P2 |
Main Unit Weight (Kg) |
2 |
|
CXN60200-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60200-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60200-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60200-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60200-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60200-S2PN-CD-P2 |
Positioning Presion (µm) |
15 |
|
CXN60200-S2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60200-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60200-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60200-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60200-S2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60200-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
15 |
|
CXN60200-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60200-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60200-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60200-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60200-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60200-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60200-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60200-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60200-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60200-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60200-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60200-F2PN-CD-P2 |
Travel Stroke (mm) |
200 |
|
CXN60200-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60200-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60200-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60200-F2PN-CD-P2 |
Main Unit Weight (Kg) |
2 |
|
CXN60200-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60200-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60200-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60200-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60200-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60200-F2PN-CD-P2 |
Positioning Presion (µm) |
15 |
|
CXN60200-F2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60200-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60200-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60200-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60200-F2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60200-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
15 |
|
CXN60200-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60200-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60200-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60200-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60200-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60200-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60200-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60200-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60200-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60200-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60200-S2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60200-S2PN-CD-P4 |
Travel Stroke (mm) |
200 |
|
CXN60200-S2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60200-S2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60200-S2PN-CD-P4 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60200-S2PN-CD-P4 |
Main Unit Weight (Kg) |
2 |
|
CXN60200-S2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60200-S2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60200-S2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60200-S2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60200-S2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60200-S2PN-CD-P4 |
Positioning Presion (µm) |
15 |
|
CXN60200-S2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60200-S2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60200-S2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60200-S2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60200-S2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60200-S2PN-CD-P4 |
Dynamic Parallelism (µm) |
15 |
|
CXN60200-S2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60200-S2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60200-S2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60200-S2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60200-S2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60200-S2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60200-S2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60200-S2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60200-S2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60200-S2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60200-F2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60200-F2PN-CD-P4 |
Travel Stroke (mm) |
200 |
|
CXN60200-F2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60200-F2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60200-F2PN-CD-P4 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60200-F2PN-CD-P4 |
Main Unit Weight (Kg) |
2 |
|
CXN60200-F2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60200-F2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60200-F2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60200-F2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60200-F2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60200-F2PN-CD-P4 |
Positioning Presion (µm) |
15 |
|
CXN60200-F2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60200-F2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60200-F2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60200-F2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60200-F2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60200-F2PN-CD-P4 |
Dynamic Parallelism (µm) |
15 |
|
CXN60200-F2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60200-F2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60200-F2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60200-F2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60200-F2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60200-F2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60200-F2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60200-F2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60200-F2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60200-F2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
Model No. |
Specification |
Value |
|---|---|---|
|
CXN60250-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60250-S2PN-CD-P2 |
Travel Stroke (mm) |
250 |
|
CXN60250-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60250-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60250-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60250-S2PN-CD-P2 |
Main Unit Weight (Kg) |
2.3 |
|
CXN60250-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60250-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60250-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60250-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60250-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60250-S2PN-CD-P2 |
Positioning Presion (µm) |
25 |
|
CXN60250-S2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60250-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60250-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60250-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60250-S2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60250-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
25 |
|
CXN60250-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60250-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60250-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60250-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60250-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60250-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60250-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60250-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60250-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60250-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60250-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60250-F2PN-CD-P2 |
Travel Stroke (mm) |
250 |
|
CXN60250-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60250-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60250-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60250-F2PN-CD-P2 |
Main Unit Weight (Kg) |
2.3 |
|
CXN60250-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60250-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60250-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60250-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60250-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60250-F2PN-CD-P2 |
Positioning Presion (µm) |
25 |
|
CXN60250-F2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60250-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60250-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60250-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60250-F2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60250-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
25 |
|
CXN60250-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60250-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60250-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60250-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60250-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60250-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60250-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60250-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60250-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60250-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60250-S2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60250-S2PN-CD-P4 |
Travel Stroke (mm) |
250 |
|
CXN60250-S2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60250-S2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60250-S2PN-CD-P4 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60250-S2PN-CD-P4 |
Main Unit Weight (Kg) |
2.3 |
|
CXN60250-S2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60250-S2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60250-S2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60250-S2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60250-S2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60250-S2PN-CD-P4 |
Positioning Presion (µm) |
25 |
|
CXN60250-S2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60250-S2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60250-S2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60250-S2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60250-S2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60250-S2PN-CD-P4 |
Dynamic Parallelism (µm) |
25 |
|
CXN60250-S2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60250-S2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60250-S2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60250-S2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60250-S2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60250-S2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60250-S2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60250-S2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60250-S2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60250-S2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60250-F2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60250-F2PN-CD-P4 |
Travel Stroke (mm) |
250 |
|
CXN60250-F2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60250-F2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60250-F2PN-CD-P4 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60250-F2PN-CD-P4 |
Main Unit Weight (Kg) |
2.3 |
|
CXN60250-F2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60250-F2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60250-F2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60250-F2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60250-F2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60250-F2PN-CD-P4 |
Positioning Presion (µm) |
25 |
|
CXN60250-F2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60250-F2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60250-F2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60250-F2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60250-F2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60250-F2PN-CD-P4 |
Dynamic Parallelism (µm) |
25 |
|
CXN60250-F2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60250-F2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60250-F2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60250-F2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60250-F2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60250-F2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60250-F2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60250-F2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60250-F2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60250-F2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60300-S2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60300-S2PN-CD-P2 |
Travel Stroke (mm) |
300 |
|
CXN60300-S2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60300-S2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60300-S2PN-CD-P2 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60300-S2PN-CD-P2 |
Main Unit Weight (Kg) |
2.6 |
|
CXN60300-S2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60300-S2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60300-S2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60300-S2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60300-S2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60300-S2PN-CD-P2 |
Positioning Presion (µm) |
25 |
|
CXN60300-S2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60300-S2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60300-S2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60300-S2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60300-S2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60300-S2PN-CD-P2 |
Dynamic Parallelism (µm) |
25 |
|
CXN60300-S2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60300-S2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60300-S2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60300-S2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60300-S2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60300-S2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60300-S2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60300-S2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60300-S2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60300-S2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60300-F2PN-CD-P2 |
Table Size (mm) |
60 × 60 |
|
CXN60300-F2PN-CD-P2 |
Travel Stroke (mm) |
300 |
|
CXN60300-F2PN-CD-P2 |
Drive Type |
Ball screw Ø8 lead 2 mm |
|
CXN60300-F2PN-CD-P2 |
Rail |
Circular Linear Ball Guiding |
|
CXN60300-F2PN-CD-P2 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60300-F2PN-CD-P2 |
Main Unit Weight (Kg) |
2.6 |
|
CXN60300-F2PN-CD-P2 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60300-F2PN-CD-P2 |
Accuracy Level |
P：Precision grade |
|
CXN60300-F2PN-CD-P2 |
Wiring Method |
N：GMT Standard |
|
CXN60300-F2PN-CD-P2 |
Resolution (Pulse) (µm) |
4 (Full) / 2 (Half) |
|
CXN60300-F2PN-CD-P2 |
Max. Speed (Full Step) (mm / sec) |
40 |
|
CXN60300-F2PN-CD-P2 |
Positioning Presion (µm) |
25 |
|
CXN60300-F2PN-CD-P2 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60300-F2PN-CD-P2 |
Load Capacity (Kgf) |
14 |
|
CXN60300-F2PN-CD-P2 |
Missed Step (µm) |
1 |
|
CXN60300-F2PN-CD-P2 |
Parallelism (µm) |
20 |
|
CXN60300-F2PN-CD-P2 |
Dynamic Straightness (µm) |
6 |
|
CXN60300-F2PN-CD-P2 |
Dynamic Parallelism (µm) |
25 |
|
CXN60300-F2PN-CD-P2 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60300-F2PN-CD-P2 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60300-F2PN-CD-P2 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60300-F2PN-CD-P2 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60300-F2PN-CD-P2 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60300-F2PN-CD-P2 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60300-F2PN-CD-P2 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60300-F2PN-CD-P2 |
Power Voltage |
24V ± 10% |
|
CXN60300-F2PN-CD-P2 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60300-F2PN-CD-P2 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60300-S2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60300-S2PN-CD-P4 |
Travel Stroke (mm) |
300 |
|
CXN60300-S2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60300-S2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60300-S2PN-CD-P4 |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CXN60300-S2PN-CD-P4 |
Main Unit Weight (Kg) |
2.6 |
|
CXN60300-S2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60300-S2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60300-S2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60300-S2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60300-S2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60300-S2PN-CD-P4 |
Positioning Presion (µm) |
25 |
|
CXN60300-S2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60300-S2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60300-S2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60300-S2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60300-S2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60300-S2PN-CD-P4 |
Dynamic Parallelism (µm) |
25 |
|
CXN60300-S2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60300-S2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60300-S2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60300-S2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60300-S2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60300-S2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60300-S2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60300-S2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60300-S2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60300-S2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXN60300-F2PN-CD-P4 |
Table Size (mm) |
60 × 60 |
|
CXN60300-F2PN-CD-P4 |
Travel Stroke (mm) |
300 |
|
CXN60300-F2PN-CD-P4 |
Drive Type |
Ball screw Ø8 lead 4 mm |
|
CXN60300-F2PN-CD-P4 |
Rail |
Circular Linear Ball Guiding |
|
CXN60300-F2PN-CD-P4 |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CXN60300-F2PN-CD-P4 |
Main Unit Weight (Kg) |
2.6 |
|
CXN60300-F2PN-CD-P4 |
Coupling |
FAMCS11.6-5*5 |
|
CXN60300-F2PN-CD-P4 |
Accuracy Level |
P：Precision grade |
|
CXN60300-F2PN-CD-P4 |
Wiring Method |
N：GMT Standard |
|
CXN60300-F2PN-CD-P4 |
Resolution (Pulse) (µm) |
8 (Full) / 4 (Half) |
|
CXN60300-F2PN-CD-P4 |
Max. Speed (Full Step) (mm / sec) |
80 |
|
CXN60300-F2PN-CD-P4 |
Positioning Presion (µm) |
25 |
|
CXN60300-F2PN-CD-P4 |
Repeatability Precision (µm) |
±0.5 |
|
CXN60300-F2PN-CD-P4 |
Load Capacity (Kgf) |
14 |
|
CXN60300-F2PN-CD-P4 |
Missed Step (µm) |
1 |
|
CXN60300-F2PN-CD-P4 |
Parallelism (µm) |
20 |
|
CXN60300-F2PN-CD-P4 |
Dynamic Straightness (µm) |
6 |
|
CXN60300-F2PN-CD-P4 |
Dynamic Parallelism (µm) |
25 |
|
CXN60300-F2PN-CD-P4 |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
CXN60300-F2PN-CD-P4 |
Brand / Model |
SANYO / SH5285-7211 |
|
CXN60300-F2PN-CD-P4 |
Driver Brand / Model |
Please refer to reference table |
|
CXN60300-F2PN-CD-P4 |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXN60300-F2PN-CD-P4 |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXN60300-F2PN-CD-P4 |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXN60300-F2PN-CD-P4 |
Limit Sensor |
Origin Approximation Sensor / N / A |
|
CXN60300-F2PN-CD-P4 |
Power Voltage |
24V ± 10% |
|
CXN60300-F2PN-CD-P4 |
Control Output |
NPN open collector output under 24V 8mA |
|
CXN60300-F2PN-CD-P4 |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
|
Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Inquiry - CXN60 - Precision
