CXN50 - Precision

Category: Motorized Stages

Description

★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel

Model No.	Specification	Value
CXN5030-S2PN-CD-P1	Table Size (mm)	50 × 50
CXN5030-S2PN-CD-P1	Travel Stroke (mm)	30
CXN5030-S2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN5030-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN5030-S2PN-CD-P1	Stage Material	S：Stainless
CXN5030-S2PN-CD-P1	Surface Treatment	Nickel Plating
CXN5030-S2PN-CD-P1	Main Unit Weight (Kg)	0.97
CXN5030-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN5030-S2PN-CD-P1	Accuracy Level	Precision
CXN5030-S2PN-CD-P1	Wiring Method	GMT Standard
CXN5030-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN5030-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN5030-S2PN-CD-P1	Positioning Presion (µm)	5
CXN5030-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN5030-S2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN5030-S2PN-CD-P1	Load Capacity (Kgf)	10
CXN5030-S2PN-CD-P1	Missed Step (µm)	1
CXN5030-S2PN-CD-P1	Moment Stiffness	N/A
CXN5030-S2PN-CD-P1	Pitch / Yaw	N/A
CXN5030-S2PN-CD-P1	Parallelism (µm)	15
CXN5030-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXN5030-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN5030-S2PN-CD-P1	Motor Type	5-Phase Stepper
CXN5030-S2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5030-S2PN-CD-P1	Motor Brand	Sanyo
CXN5030-S2PN-CD-P1	Motor Model	SH5281-7211
CXN5030-S2PN-CD-P1	Driver Brand	Please refer to reference table
CXN5030-S2PN-CD-P1	Driver Model	Please refer to reference table
CXN5030-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5030-S2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5030-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5030-S2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5030-S2PN-CD-P1	Power Voltage	24V ± 10%
CXN5030-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN5030-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5030-F2PN-CD-P1	Table Size (mm)	50 × 50
CXN5030-F2PN-CD-P1	Travel Stroke (mm)	30
CXN5030-F2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN5030-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN5030-F2PN-CD-P1	Stage Material	F：Carbon Steel
CXN5030-F2PN-CD-P1	Surface Treatment	Nickel Plating
CXN5030-F2PN-CD-P1	Main Unit Weight (Kg)	0.97
CXN5030-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN5030-F2PN-CD-P1	Accuracy Level	Precision
CXN5030-F2PN-CD-P1	Wiring Method	GMT Standard
CXN5030-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN5030-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN5030-F2PN-CD-P1	Positioning Presion (µm)	5
CXN5030-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN5030-F2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN5030-F2PN-CD-P1	Load Capacity (Kgf)	10
CXN5030-F2PN-CD-P1	Missed Step (µm)	1
CXN5030-F2PN-CD-P1	Moment Stiffness	N/A
CXN5030-F2PN-CD-P1	Pitch / Yaw	N/A
CXN5030-F2PN-CD-P1	Parallelism (µm)	15
CXN5030-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXN5030-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN5030-F2PN-CD-P1	Motor Type	5-Phase Stepper
CXN5030-F2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5030-F2PN-CD-P1	Motor Brand	Sanyo
CXN5030-F2PN-CD-P1	Motor Model	SH5281-7211
CXN5030-F2PN-CD-P1	Driver Brand	Please refer to reference table
CXN5030-F2PN-CD-P1	Driver Model	Please refer to reference table
CXN5030-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5030-F2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5030-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5030-F2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5030-F2PN-CD-P1	Power Voltage	24V ± 10%
CXN5030-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN5030-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5030-S2PN-CD-P2	Table Size (mm)	50 × 50
CXN5030-S2PN-CD-P2	Travel Stroke (mm)	30
CXN5030-S2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN5030-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN5030-S2PN-CD-P2	Stage Material	S：Stainless
CXN5030-S2PN-CD-P2	Surface Treatment	Nickel Plating
CXN5030-S2PN-CD-P2	Main Unit Weight (Kg)	0.97
CXN5030-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN5030-S2PN-CD-P2	Accuracy Level	Precision
CXN5030-S2PN-CD-P2	Wiring Method	GMT Standard
CXN5030-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXN5030-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN5030-S2PN-CD-P2	Positioning Presion (µm)	5
CXN5030-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN5030-S2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN5030-S2PN-CD-P2	Load Capacity (Kgf)	10
CXN5030-S2PN-CD-P2	Missed Step (µm)	1
CXN5030-S2PN-CD-P2	Moment Stiffness	N/A
CXN5030-S2PN-CD-P2	Pitch / Yaw	N/A
CXN5030-S2PN-CD-P2	Parallelism (µm)	15
CXN5030-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXN5030-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN5030-S2PN-CD-P2	Motor Type	5-Phase Stepper
CXN5030-S2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5030-S2PN-CD-P2	Motor Brand	Sanyo
CXN5030-S2PN-CD-P2	Motor Model	SH5281-7211
CXN5030-S2PN-CD-P2	Driver Brand	Please refer to reference table
CXN5030-S2PN-CD-P2	Driver Model	Please refer to reference table
CXN5030-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5030-S2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5030-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5030-S2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5030-S2PN-CD-P2	Power Voltage	24V ± 10%
CXN5030-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN5030-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5030-F2PN-CD-P2	Table Size (mm)	50 × 50
CXN5030-F2PN-CD-P2	Travel Stroke (mm)	30
CXN5030-F2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN5030-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN5030-F2PN-CD-P2	Stage Material	F：Carbon Steel
CXN5030-F2PN-CD-P2	Surface Treatment	Nickel Plating
CXN5030-F2PN-CD-P2	Main Unit Weight (Kg)	0.97
CXN5030-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN5030-F2PN-CD-P2	Accuracy Level	Precision
CXN5030-F2PN-CD-P2	Wiring Method	GMT Standard
CXN5030-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXN5030-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN5030-F2PN-CD-P2	Positioning Presion (µm)	5
CXN5030-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN5030-F2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN5030-F2PN-CD-P2	Load Capacity (Kgf)	10
CXN5030-F2PN-CD-P2	Missed Step (µm)	1
CXN5030-F2PN-CD-P2	Moment Stiffness	N/A
CXN5030-F2PN-CD-P2	Pitch / Yaw	N/A
CXN5030-F2PN-CD-P2	Parallelism (µm)	15
CXN5030-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXN5030-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN5030-F2PN-CD-P2	Motor Type	5-Phase Stepper
CXN5030-F2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5030-F2PN-CD-P2	Motor Brand	Sanyo
CXN5030-F2PN-CD-P2	Motor Model	SH5281-7211
CXN5030-F2PN-CD-P2	Driver Brand	Please refer to reference table
CXN5030-F2PN-CD-P2	Driver Model	Please refer to reference table
CXN5030-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5030-F2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5030-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5030-F2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5030-F2PN-CD-P2	Power Voltage	24V ± 10%
CXN5030-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN5030-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5050-S2PN-CD-P1	Table Size (mm)	50 × 50
CXN5050-S2PN-CD-P1	Travel Stroke (mm)	50
CXN5050-S2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN5050-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN5050-S2PN-CD-P1	Stage Material	S：Stainless
CXN5050-S2PN-CD-P1	Surface Treatment	Nickel Plating
CXN5050-S2PN-CD-P1	Main Unit Weight (Kg)	1.1
CXN5050-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN5050-S2PN-CD-P1	Accuracy Level	Precision
CXN5050-S2PN-CD-P1	Wiring Method	GMT Standard
CXN5050-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN5050-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN5050-S2PN-CD-P1	Positioning Presion (µm)	5
CXN5050-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN5050-S2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN5050-S2PN-CD-P1	Load Capacity (Kgf)	10
CXN5050-S2PN-CD-P1	Missed Step (µm)	1
CXN5050-S2PN-CD-P1	Moment Stiffness	N/A
CXN5050-S2PN-CD-P1	Pitch / Yaw	N/A
CXN5050-S2PN-CD-P1	Parallelism (µm)	15
CXN5050-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXN5050-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN5050-S2PN-CD-P1	Motor Type	5-Phase Stepper
CXN5050-S2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5050-S2PN-CD-P1	Motor Brand	Sanyo
CXN5050-S2PN-CD-P1	Motor Model	SH5281-7211
CXN5050-S2PN-CD-P1	Driver Brand	Please refer to reference table
CXN5050-S2PN-CD-P1	Driver Model	Please refer to reference table
CXN5050-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5050-S2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5050-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5050-S2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5050-S2PN-CD-P1	Power Voltage	24V ± 10%
CXN5050-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN5050-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5050-F2PN-CD-P1	Table Size (mm)	50 × 50
CXN5050-F2PN-CD-P1	Travel Stroke (mm)	50
CXN5050-F2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN5050-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN5050-F2PN-CD-P1	Stage Material	F：Carbon Steel
CXN5050-F2PN-CD-P1	Surface Treatment	Nickel Plating
CXN5050-F2PN-CD-P1	Main Unit Weight (Kg)	1.1
CXN5050-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN5050-F2PN-CD-P1	Accuracy Level	Precision
CXN5050-F2PN-CD-P1	Wiring Method	GMT Standard
CXN5050-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN5050-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN5050-F2PN-CD-P1	Positioning Presion (µm)	5
CXN5050-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN5050-F2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN5050-F2PN-CD-P1	Load Capacity (Kgf)	10
CXN5050-F2PN-CD-P1	Missed Step (µm)	1
CXN5050-F2PN-CD-P1	Moment Stiffness	N/A
CXN5050-F2PN-CD-P1	Pitch / Yaw	N/A
CXN5050-F2PN-CD-P1	Parallelism (µm)	15
CXN5050-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXN5050-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN5050-F2PN-CD-P1	Motor Type	5-Phase Stepper
CXN5050-F2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5050-F2PN-CD-P1	Motor Brand	Sanyo
CXN5050-F2PN-CD-P1	Motor Model	SH5281-7211
CXN5050-F2PN-CD-P1	Driver Brand	Please refer to reference table
CXN5050-F2PN-CD-P1	Driver Model	Please refer to reference table
CXN5050-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5050-F2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5050-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5050-F2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5050-F2PN-CD-P1	Power Voltage	24V ± 10%
CXN5050-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN5050-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5050-S2PN-CD-P2	Table Size (mm)	50 × 50
CXN5050-S2PN-CD-P2	Travel Stroke (mm)	50
CXN5050-S2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN5050-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN5050-S2PN-CD-P2	Stage Material	S：Stainless
CXN5050-S2PN-CD-P2	Surface Treatment	Nickel Plating
CXN5050-S2PN-CD-P2	Main Unit Weight (Kg)	1.1
CXN5050-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN5050-S2PN-CD-P2	Accuracy Level	Precision
CXN5050-S2PN-CD-P2	Wiring Method	GMT Standard
CXN5050-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXN5050-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN5050-S2PN-CD-P2	Positioning Presion (µm)	5
CXN5050-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN5050-S2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN5050-S2PN-CD-P2	Load Capacity (Kgf)	10
CXN5050-S2PN-CD-P2	Missed Step (µm)	1
CXN5050-S2PN-CD-P2	Moment Stiffness	N/A
CXN5050-S2PN-CD-P2	Pitch / Yaw	N/A
CXN5050-S2PN-CD-P2	Parallelism (µm)	15
CXN5050-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXN5050-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN5050-S2PN-CD-P2	Motor Type	5-Phase Stepper
CXN5050-S2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5050-S2PN-CD-P2	Motor Brand	Sanyo
CXN5050-S2PN-CD-P2	Motor Model	SH5281-7211
CXN5050-S2PN-CD-P2	Driver Brand	Please refer to reference table
CXN5050-S2PN-CD-P2	Driver Model	Please refer to reference table
CXN5050-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5050-S2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5050-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5050-S2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5050-S2PN-CD-P2	Power Voltage	24V ± 10%
CXN5050-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN5050-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5050-F2PN-CD-P2	Table Size (mm)	50 × 50
CXN5050-F2PN-CD-P2	Travel Stroke (mm)	50
CXN5050-F2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN5050-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN5050-F2PN-CD-P2	Stage Material	F：Carbon Steel
CXN5050-F2PN-CD-P2	Surface Treatment	Nickel Plating
CXN5050-F2PN-CD-P2	Main Unit Weight (Kg)	1.1
CXN5050-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN5050-F2PN-CD-P2	Accuracy Level	Precision
CXN5050-F2PN-CD-P2	Wiring Method	GMT Standard
CXN5050-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXN5050-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN5050-F2PN-CD-P2	Positioning Presion (µm)	5
CXN5050-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN5050-F2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN5050-F2PN-CD-P2	Load Capacity (Kgf)	10
CXN5050-F2PN-CD-P2	Missed Step (µm)	1
CXN5050-F2PN-CD-P2	Moment Stiffness	N/A
CXN5050-F2PN-CD-P2	Pitch / Yaw	N/A
CXN5050-F2PN-CD-P2	Parallelism (µm)	15
CXN5050-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXN5050-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN5050-F2PN-CD-P2	Motor Type	5-Phase Stepper
CXN5050-F2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5050-F2PN-CD-P2	Motor Brand	Sanyo
CXN5050-F2PN-CD-P2	Motor Model	SH5281-7211
CXN5050-F2PN-CD-P2	Driver Brand	Please refer to reference table
CXN5050-F2PN-CD-P2	Driver Model	Please refer to reference table
CXN5050-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5050-F2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5050-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5050-F2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5050-F2PN-CD-P2	Power Voltage	24V ± 10%
CXN5050-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN5050-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5075-S2PN-CD-P1	Table Size (mm)	50 × 50
CXN5075-S2PN-CD-P1	Travel Stroke (mm)	75
CXN5075-S2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN5075-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN5075-S2PN-CD-P1	Stage Material	S：Stainless
CXN5075-S2PN-CD-P1	Surface Treatment	Nickel Plating
CXN5075-S2PN-CD-P1	Main Unit Weight (Kg)	1.24
CXN5075-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN5075-S2PN-CD-P1	Accuracy Level	Precision
CXN5075-S2PN-CD-P1	Wiring Method	GMT Standard
CXN5075-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN5075-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN5075-S2PN-CD-P1	Positioning Presion (µm)	7
CXN5075-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN5075-S2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN5075-S2PN-CD-P1	Load Capacity (Kgf)	10
CXN5075-S2PN-CD-P1	Missed Step (µm)	1
CXN5075-S2PN-CD-P1	Moment Stiffness	N/A
CXN5075-S2PN-CD-P1	Pitch / Yaw	N/A
CXN5075-S2PN-CD-P1	Parallelism (µm)	15
CXN5075-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXN5075-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN5075-S2PN-CD-P1	Motor Type	5-Phase Stepper
CXN5075-S2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5075-S2PN-CD-P1	Motor Brand	Sanyo
CXN5075-S2PN-CD-P1	Motor Model	SH5281-7211
CXN5075-S2PN-CD-P1	Driver Brand	Please refer to reference table
CXN5075-S2PN-CD-P1	Driver Model	Please refer to reference table
CXN5075-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5075-S2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5075-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5075-S2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5075-S2PN-CD-P1	Power Voltage	24V ± 10%
CXN5075-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN5075-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5075-F2PN-CD-P1	Table Size (mm)	50 × 50
CXN5075-F2PN-CD-P1	Travel Stroke (mm)	75
CXN5075-F2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN5075-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN5075-F2PN-CD-P1	Stage Material	F：Carbon Steel
CXN5075-F2PN-CD-P1	Surface Treatment	Nickel Plating
CXN5075-F2PN-CD-P1	Main Unit Weight (Kg)	1.24
CXN5075-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN5075-F2PN-CD-P1	Accuracy Level	Precision
CXN5075-F2PN-CD-P1	Wiring Method	GMT Standard
CXN5075-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN5075-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN5075-F2PN-CD-P1	Positioning Presion (µm)	7
CXN5075-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN5075-F2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN5075-F2PN-CD-P1	Load Capacity (Kgf)	10
CXN5075-F2PN-CD-P1	Missed Step (µm)	1
CXN5075-F2PN-CD-P1	Moment Stiffness	N/A
CXN5075-F2PN-CD-P1	Pitch / Yaw	N/A
CXN5075-F2PN-CD-P1	Parallelism (µm)	15
CXN5075-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXN5075-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN5075-F2PN-CD-P1	Motor Type	5-Phase Stepper
CXN5075-F2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5075-F2PN-CD-P1	Motor Brand	Sanyo
CXN5075-F2PN-CD-P1	Motor Model	SH5281-7211
CXN5075-F2PN-CD-P1	Driver Brand	Please refer to reference table
CXN5075-F2PN-CD-P1	Driver Model	Please refer to reference table
CXN5075-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5075-F2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5075-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5075-F2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5075-F2PN-CD-P1	Power Voltage	24V ± 10%
CXN5075-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN5075-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5075-S2PN-CD-P2	Table Size (mm)	50 × 50
CXN5075-S2PN-CD-P2	Travel Stroke (mm)	75
CXN5075-S2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN5075-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN5075-S2PN-CD-P2	Stage Material	S：Stainless
CXN5075-S2PN-CD-P2	Surface Treatment	Nickel Plating
CXN5075-S2PN-CD-P2	Main Unit Weight (Kg)	1.24
CXN5075-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN5075-S2PN-CD-P2	Accuracy Level	Precision
CXN5075-S2PN-CD-P2	Wiring Method	GMT Standard
CXN5075-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXN5075-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN5075-S2PN-CD-P2	Positioning Presion (µm)	7
CXN5075-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN5075-S2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN5075-S2PN-CD-P2	Load Capacity (Kgf)	10
CXN5075-S2PN-CD-P2	Missed Step (µm)	1
CXN5075-S2PN-CD-P2	Moment Stiffness	N/A
CXN5075-S2PN-CD-P2	Pitch / Yaw	N/A
CXN5075-S2PN-CD-P2	Parallelism (µm)	15
CXN5075-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXN5075-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN5075-S2PN-CD-P2	Motor Type	5-Phase Stepper
CXN5075-S2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5075-S2PN-CD-P2	Motor Brand	Sanyo
CXN5075-S2PN-CD-P2	Motor Model	SH5281-7211
CXN5075-S2PN-CD-P2	Driver Brand	Please refer to reference table
CXN5075-S2PN-CD-P2	Driver Model	Please refer to reference table
CXN5075-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5075-S2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5075-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5075-S2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5075-S2PN-CD-P2	Power Voltage	24V ± 10%
CXN5075-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN5075-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN5075-F2PN-CD-P2	Table Size (mm)	50 × 50
CXN5075-F2PN-CD-P2	Travel Stroke (mm)	75
CXN5075-F2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN5075-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN5075-F2PN-CD-P2	Stage Material	F：Carbon Steel
CXN5075-F2PN-CD-P2	Surface Treatment	Nickel Plating
CXN5075-F2PN-CD-P2	Main Unit Weight (Kg)	1.24
CXN5075-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN5075-F2PN-CD-P2	Accuracy Level	Precision
CXN5075-F2PN-CD-P2	Wiring Method	GMT Standard
CXN5075-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXN5075-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN5075-F2PN-CD-P2	Positioning Presion (µm)	7
CXN5075-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN5075-F2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN5075-F2PN-CD-P2	Load Capacity (Kgf)	10
CXN5075-F2PN-CD-P2	Missed Step (µm)	1
CXN5075-F2PN-CD-P2	Moment Stiffness	N/A
CXN5075-F2PN-CD-P2	Pitch / Yaw	N/A
CXN5075-F2PN-CD-P2	Parallelism (µm)	15
CXN5075-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXN5075-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN5075-F2PN-CD-P2	Motor Type	5-Phase Stepper
CXN5075-F2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN5075-F2PN-CD-P2	Motor Brand	Sanyo
CXN5075-F2PN-CD-P2	Motor Model	SH5281-7211
CXN5075-F2PN-CD-P2	Driver Brand	Please refer to reference table
CXN5075-F2PN-CD-P2	Driver Model	Please refer to reference table
CXN5075-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN5075-F2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN5075-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN5075-F2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN5075-F2PN-CD-P2	Power Voltage	24V ± 10%
CXN5075-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN5075-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)

Model No.	Specification	Value
CXN50100-S2PN-CD-P1	Table Size (mm)	50 × 50
CXN50100-S2PN-CD-P1	Travel Stroke (mm)	100
CXN50100-S2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN50100-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN50100-S2PN-CD-P1	Stage Material	S：Stainless
CXN50100-S2PN-CD-P1	Surface Treatment	Nickel Plating
CXN50100-S2PN-CD-P1	Main Unit Weight (Kg)	1.35
CXN50100-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN50100-S2PN-CD-P1	Accuracy Level	Precision
CXN50100-S2PN-CD-P1	Wiring Method	GMT Standard
CXN50100-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN50100-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN50100-S2PN-CD-P1	Positioning Presion (µm)	10
CXN50100-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN50100-S2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN50100-S2PN-CD-P1	Load Capacity (Kgf)	10
CXN50100-S2PN-CD-P1	Missed Step (µm)	1
CXN50100-S2PN-CD-P1	Moment Stiffness	N/A
CXN50100-S2PN-CD-P1	Pitch / Yaw	N/A
CXN50100-S2PN-CD-P1	Parallelism (µm)	15
CXN50100-S2PN-CD-P1	Dynamic Straightness (µm)	4
CXN50100-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN50100-S2PN-CD-P1	Motor Type	5-Phase Stepper
CXN50100-S2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50100-S2PN-CD-P1	Motor Brand	Sanyo
CXN50100-S2PN-CD-P1	Motor Model	SH5285-7211
CXN50100-S2PN-CD-P1	Driver Brand	Please refer to reference table
CXN50100-S2PN-CD-P1	Driver Model	Please refer to reference table
CXN50100-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50100-S2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50100-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50100-S2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50100-S2PN-CD-P1	Power Voltage	24V ± 10%
CXN50100-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN50100-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50100-F2PN-CD-P1	Table Size (mm)	50 × 50
CXN50100-F2PN-CD-P1	Travel Stroke (mm)	100
CXN50100-F2PN-CD-P1	Drive Type	Ball Screw Ø8，Lead 1mm
CXN50100-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXN50100-F2PN-CD-P1	Stage Material	F：Carbon Steel
CXN50100-F2PN-CD-P1	Surface Treatment	Nickel Plating
CXN50100-F2PN-CD-P1	Main Unit Weight (Kg)	1.35
CXN50100-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXN50100-F2PN-CD-P1	Accuracy Level	Precision
CXN50100-F2PN-CD-P1	Wiring Method	GMT Standard
CXN50100-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXN50100-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXN50100-F2PN-CD-P1	Positioning Presion (µm)	10
CXN50100-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXN50100-F2PN-CD-P1	Multi-point Repeatability Precision(µm)	N/A
CXN50100-F2PN-CD-P1	Load Capacity (Kgf)	10
CXN50100-F2PN-CD-P1	Missed Step (µm)	1
CXN50100-F2PN-CD-P1	Moment Stiffness	N/A
CXN50100-F2PN-CD-P1	Pitch / Yaw	N/A
CXN50100-F2PN-CD-P1	Parallelism (µm)	15
CXN50100-F2PN-CD-P1	Dynamic Straightness (µm)	4
CXN50100-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXN50100-F2PN-CD-P1	Motor Type	5-Phase Stepper
CXN50100-F2PN-CD-P1	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50100-F2PN-CD-P1	Motor Brand	Sanyo
CXN50100-F2PN-CD-P1	Motor Model	SH5285-7211
CXN50100-F2PN-CD-P1	Driver Brand	Please refer to reference table
CXN50100-F2PN-CD-P1	Driver Model	Please refer to reference table
CXN50100-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50100-F2PN-CD-P1	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50100-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50100-F2PN-CD-P1	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50100-F2PN-CD-P1	Power Voltage	24V ± 10%
CXN50100-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXN50100-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50100-S2PN-CD-P2	Table Size (mm)	50 × 50
CXN50100-S2PN-CD-P2	Travel Stroke (mm)	100
CXN50100-S2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN50100-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN50100-S2PN-CD-P2	Stage Material	S：Stainless
CXN50100-S2PN-CD-P2	Surface Treatment	Nickel Plating
CXN50100-S2PN-CD-P2	Main Unit Weight (Kg)	1.35
CXN50100-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN50100-S2PN-CD-P2	Accuracy Level	Precision
CXN50100-S2PN-CD-P2	Wiring Method	GMT Standard
CXN50100-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) /2 (Half)
CXN50100-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN50100-S2PN-CD-P2	Positioning Presion (µm)	10
CXN50100-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN50100-S2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN50100-S2PN-CD-P2	Load Capacity (Kgf)	10
CXN50100-S2PN-CD-P2	Missed Step (µm)	1
CXN50100-S2PN-CD-P2	Moment Stiffness	N/A
CXN50100-S2PN-CD-P2	Pitch / Yaw	N/A
CXN50100-S2PN-CD-P2	Parallelism (µm)	15
CXN50100-S2PN-CD-P2	Dynamic Straightness (µm)	4
CXN50100-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN50100-S2PN-CD-P2	Motor Type	5-Phase Stepper
CXN50100-S2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50100-S2PN-CD-P2	Motor Brand	Sanyo
CXN50100-S2PN-CD-P2	Motor Model	SH5285-7211
CXN50100-S2PN-CD-P2	Driver Brand	Please refer to reference table
CXN50100-S2PN-CD-P2	Driver Model	Please refer to reference table
CXN50100-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50100-S2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50100-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50100-S2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50100-S2PN-CD-P2	Power Voltage	24V ± 10%
CXN50100-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN50100-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50100-F2PN-CD-P2	Table Size (mm)	50 × 50
CXN50100-F2PN-CD-P2	Travel Stroke (mm)	100
CXN50100-F2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN50100-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN50100-F2PN-CD-P2	Stage Material	F：Carbon Steel
CXN50100-F2PN-CD-P2	Surface Treatment	Nickel Plating
CXN50100-F2PN-CD-P2	Main Unit Weight (Kg)	1.35
CXN50100-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN50100-F2PN-CD-P2	Accuracy Level	Precision
CXN50100-F2PN-CD-P2	Wiring Method	GMT Standard
CXN50100-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) /2 (Half)
CXN50100-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN50100-F2PN-CD-P2	Positioning Presion (µm)	10
CXN50100-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN50100-F2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN50100-F2PN-CD-P2	Load Capacity (Kgf)	10
CXN50100-F2PN-CD-P2	Missed Step (µm)	1
CXN50100-F2PN-CD-P2	Moment Stiffness	N/A
CXN50100-F2PN-CD-P2	Pitch / Yaw	N/A
CXN50100-F2PN-CD-P2	Parallelism (µm)	15
CXN50100-F2PN-CD-P2	Dynamic Straightness (µm)	4
CXN50100-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN50100-F2PN-CD-P2	Motor Type	5-Phase Stepper
CXN50100-F2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50100-F2PN-CD-P2	Motor Brand	Sanyo
CXN50100-F2PN-CD-P2	Motor Model	SH5285-7211
CXN50100-F2PN-CD-P2	Driver Brand	Please refer to reference table
CXN50100-F2PN-CD-P2	Driver Model	Please refer to reference table
CXN50100-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50100-F2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50100-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50100-F2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50100-F2PN-CD-P2	Power Voltage	24V ± 10%
CXN50100-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN50100-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50150-S2PN-CD-P2	Table Size (mm)	50 × 50
CXN50150-S2PN-CD-P2	Travel Stroke (mm)	150
CXN50150-S2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN50150-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN50150-S2PN-CD-P2	Stage Material	S：Stainless
CXN50150-S2PN-CD-P2	Surface Treatment	Nickel Plating
CXN50150-S2PN-CD-P2	Main Unit Weight (Kg)	1.5
CXN50150-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN50150-S2PN-CD-P2	Accuracy Level	Precision
CXN50150-S2PN-CD-P2	Wiring Method	GMT Standard
CXN50150-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) /2 (Half)
CXN50150-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN50150-S2PN-CD-P2	Positioning Presion (µm)	15
CXN50150-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN50150-S2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN50150-S2PN-CD-P2	Load Capacity (Kgf)	10
CXN50150-S2PN-CD-P2	Missed Step (µm)	1
CXN50150-S2PN-CD-P2	Moment Stiffness	N/A
CXN50150-S2PN-CD-P2	Pitch / Yaw	N/A
CXN50150-S2PN-CD-P2	Parallelism (µm)	15
CXN50150-S2PN-CD-P2	Dynamic Straightness (µm)	4
CXN50150-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN50150-S2PN-CD-P2	Motor Type	5-Phase Stepper
CXN50150-S2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50150-S2PN-CD-P2	Motor Brand	Sanyo
CXN50150-S2PN-CD-P2	Motor Model	SH5285-7211
CXN50150-S2PN-CD-P2	Driver Brand	Please refer to reference table
CXN50150-S2PN-CD-P2	Driver Model	Please refer to reference table
CXN50150-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50150-S2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50150-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50150-S2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50150-S2PN-CD-P2	Power Voltage	24V ± 10%
CXN50150-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN50150-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50150-F2PN-CD-P2	Table Size (mm)	50 × 50
CXN50150-F2PN-CD-P2	Travel Stroke (mm)	150
CXN50150-F2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN50150-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN50150-F2PN-CD-P2	Stage Material	F：Carbon Steel
CXN50150-F2PN-CD-P2	Surface Treatment	Nickel Plating
CXN50150-F2PN-CD-P2	Main Unit Weight (Kg)	1.5
CXN50150-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN50150-F2PN-CD-P2	Accuracy Level	Precision
CXN50150-F2PN-CD-P2	Wiring Method	GMT Standard
CXN50150-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) /2 (Half)
CXN50150-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN50150-F2PN-CD-P2	Positioning Presion (µm)	15
CXN50150-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN50150-F2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN50150-F2PN-CD-P2	Load Capacity (Kgf)	10
CXN50150-F2PN-CD-P2	Missed Step (µm)	1
CXN50150-F2PN-CD-P2	Moment Stiffness	N/A
CXN50150-F2PN-CD-P2	Pitch / Yaw	N/A
CXN50150-F2PN-CD-P2	Parallelism (µm)	15
CXN50150-F2PN-CD-P2	Dynamic Straightness (µm)	4
CXN50150-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXN50150-F2PN-CD-P2	Motor Type	5-Phase Stepper
CXN50150-F2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50150-F2PN-CD-P2	Motor Brand	Sanyo
CXN50150-F2PN-CD-P2	Motor Model	SH5285-7211
CXN50150-F2PN-CD-P2	Driver Brand	Please refer to reference table
CXN50150-F2PN-CD-P2	Driver Model	Please refer to reference table
CXN50150-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50150-F2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50150-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50150-F2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50150-F2PN-CD-P2	Power Voltage	24V ± 10%
CXN50150-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN50150-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50150-S2PN-CD-P4	Table Size (mm)	50 × 50
CXN50150-S2PN-CD-P4	Travel Stroke (mm)	150
CXN50150-S2PN-CD-P4	Drive Type	Ball Screw Ø8，Lead 4mm
CXN50150-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXN50150-S2PN-CD-P4	Stage Material	S：Stainless
CXN50150-S2PN-CD-P4	Surface Treatment	Nickel Plating
CXN50150-S2PN-CD-P4	Main Unit Weight (Kg)	1.5
CXN50150-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXN50150-S2PN-CD-P4	Accuracy Level	Precision
CXN50150-S2PN-CD-P4	Wiring Method	GMT Standard
CXN50150-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) /4 (Half)
CXN50150-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXN50150-S2PN-CD-P4	Positioning Presion (µm)	15
CXN50150-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXN50150-S2PN-CD-P4	Multi-point Repeatability Precision(µm)	N/A
CXN50150-S2PN-CD-P4	Load Capacity (Kgf)	10
CXN50150-S2PN-CD-P4	Missed Step (µm)	1
CXN50150-S2PN-CD-P4	Moment Stiffness	N/A
CXN50150-S2PN-CD-P4	Pitch / Yaw	N/A
CXN50150-S2PN-CD-P4	Parallelism (µm)	15
CXN50150-S2PN-CD-P4	Dynamic Straightness (µm)	4
CXN50150-S2PN-CD-P4	Dynamic Parallelism (µm)	10
CXN50150-S2PN-CD-P4	Motor Type	5-Phase Stepper
CXN50150-S2PN-CD-P4	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50150-S2PN-CD-P4	Motor Brand	Sanyo
CXN50150-S2PN-CD-P4	Motor Model	SH5285-7211
CXN50150-S2PN-CD-P4	Driver Brand	Please refer to reference table
CXN50150-S2PN-CD-P4	Driver Model	Please refer to reference table
CXN50150-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50150-S2PN-CD-P4	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50150-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50150-S2PN-CD-P4	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50150-S2PN-CD-P4	Power Voltage	24V ± 10%
CXN50150-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXN50150-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50150-F2PN-CD-P4	Table Size (mm)	50 × 50
CXN50150-F2PN-CD-P4	Travel Stroke (mm)	150
CXN50150-F2PN-CD-P4	Drive Type	Ball Screw Ø8，Lead 4mm
CXN50150-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXN50150-F2PN-CD-P4	Stage Material	F：Carbon Steel
CXN50150-F2PN-CD-P4	Surface Treatment	Nickel Plating
CXN50150-F2PN-CD-P4	Main Unit Weight (Kg)	1.5
CXN50150-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXN50150-F2PN-CD-P4	Accuracy Level	Precision
CXN50150-F2PN-CD-P4	Wiring Method	GMT Standard
CXN50150-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) /4 (Half)
CXN50150-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXN50150-F2PN-CD-P4	Positioning Presion (µm)	15
CXN50150-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXN50150-F2PN-CD-P4	Multi-point Repeatability Precision(µm)	N/A
CXN50150-F2PN-CD-P4	Load Capacity (Kgf)	10
CXN50150-F2PN-CD-P4	Missed Step (µm)	1
CXN50150-F2PN-CD-P4	Moment Stiffness	N/A
CXN50150-F2PN-CD-P4	Pitch / Yaw	N/A
CXN50150-F2PN-CD-P4	Parallelism (µm)	15
CXN50150-F2PN-CD-P4	Dynamic Straightness (µm)	4
CXN50150-F2PN-CD-P4	Dynamic Parallelism (µm)	10
CXN50150-F2PN-CD-P4	Motor Type	5-Phase Stepper
CXN50150-F2PN-CD-P4	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50150-F2PN-CD-P4	Motor Brand	Sanyo
CXN50150-F2PN-CD-P4	Motor Model	SH5285-7211
CXN50150-F2PN-CD-P4	Driver Brand	Please refer to reference table
CXN50150-F2PN-CD-P4	Driver Model	Please refer to reference table
CXN50150-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50150-F2PN-CD-P4	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50150-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50150-F2PN-CD-P4	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50150-F2PN-CD-P4	Power Voltage	24V ± 10%
CXN50150-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXN50150-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50200-S2PN-CD-P2	Table Size (mm)	50 × 50
CXN50200-S2PN-CD-P2	Travel Stroke (mm)	200
CXN50200-S2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN50200-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN50200-S2PN-CD-P2	Stage Material	S：Stainless
CXN50200-S2PN-CD-P2	Surface Treatment	Nickel Plating
CXN50200-S2PN-CD-P2	Main Unit Weight (Kg)	1.76
CXN50200-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN50200-S2PN-CD-P2	Accuracy Level	Precision
CXN50200-S2PN-CD-P2	Wiring Method	GMT Standard
CXN50200-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) /2 (Half)
CXN50200-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN50200-S2PN-CD-P2	Positioning Presion (µm)	15
CXN50200-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN50200-S2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN50200-S2PN-CD-P2	Load Capacity (Kgf)	10
CXN50200-S2PN-CD-P2	Missed Step (µm)	1
CXN50200-S2PN-CD-P2	Moment Stiffness	N/A
CXN50200-S2PN-CD-P2	Pitch / Yaw	N/A
CXN50200-S2PN-CD-P2	Parallelism (µm)	15
CXN50200-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXN50200-S2PN-CD-P2	Dynamic Parallelism (µm)	15
CXN50200-S2PN-CD-P2	Motor Type	5-Phase Stepper
CXN50200-S2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50200-S2PN-CD-P2	Motor Brand	Sanyo
CXN50200-S2PN-CD-P2	Motor Model	SH5285-7211
CXN50200-S2PN-CD-P2	Driver Brand	Please refer to reference table
CXN50200-S2PN-CD-P2	Driver Model	Please refer to reference table
CXN50200-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50200-S2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50200-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50200-S2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50200-S2PN-CD-P2	Power Voltage	24V ± 10%
CXN50200-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN50200-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50200-F2PN-CD-P2	Table Size (mm)	50 × 50
CXN50200-F2PN-CD-P2	Travel Stroke (mm)	200
CXN50200-F2PN-CD-P2	Drive Type	Ball Screw Ø8，Lead 2mm
CXN50200-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXN50200-F2PN-CD-P2	Stage Material	F：Carbon Steel
CXN50200-F2PN-CD-P2	Surface Treatment	Nickel Plating
CXN50200-F2PN-CD-P2	Main Unit Weight (Kg)	1.76
CXN50200-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXN50200-F2PN-CD-P2	Accuracy Level	Precision
CXN50200-F2PN-CD-P2	Wiring Method	GMT Standard
CXN50200-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) /2 (Half)
CXN50200-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXN50200-F2PN-CD-P2	Positioning Presion (µm)	15
CXN50200-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXN50200-F2PN-CD-P2	Multi-point Repeatability Precision(µm)	N/A
CXN50200-F2PN-CD-P2	Load Capacity (Kgf)	10
CXN50200-F2PN-CD-P2	Missed Step (µm)	1
CXN50200-F2PN-CD-P2	Moment Stiffness	N/A
CXN50200-F2PN-CD-P2	Pitch / Yaw	N/A
CXN50200-F2PN-CD-P2	Parallelism (µm)	15
CXN50200-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXN50200-F2PN-CD-P2	Dynamic Parallelism (µm)	15
CXN50200-F2PN-CD-P2	Motor Type	5-Phase Stepper
CXN50200-F2PN-CD-P2	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50200-F2PN-CD-P2	Motor Brand	Sanyo
CXN50200-F2PN-CD-P2	Motor Model	SH5285-7211
CXN50200-F2PN-CD-P2	Driver Brand	Please refer to reference table
CXN50200-F2PN-CD-P2	Driver Model	Please refer to reference table
CXN50200-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50200-F2PN-CD-P2	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50200-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50200-F2PN-CD-P2	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50200-F2PN-CD-P2	Power Voltage	24V ± 10%
CXN50200-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXN50200-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50200-S2PN-CD-P4	Table Size (mm)	50 × 50
CXN50200-S2PN-CD-P4	Travel Stroke (mm)	200
CXN50200-S2PN-CD-P4	Drive Type	Ball Screw Ø8，Lead 4mm
CXN50200-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXN50200-S2PN-CD-P4	Stage Material	S：Stainless
CXN50200-S2PN-CD-P4	Surface Treatment	Nickel Plating
CXN50200-S2PN-CD-P4	Main Unit Weight (Kg)	1.76
CXN50200-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXN50200-S2PN-CD-P4	Accuracy Level	Precision
CXN50200-S2PN-CD-P4	Wiring Method	GMT Standard
CXN50200-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) /4 (Half)
CXN50200-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXN50200-S2PN-CD-P4	Positioning Presion (µm)	15
CXN50200-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXN50200-S2PN-CD-P4	Multi-point Repeatability Precision(µm)	N/A
CXN50200-S2PN-CD-P4	Load Capacity (Kgf)	10
CXN50200-S2PN-CD-P4	Missed Step (µm)	1
CXN50200-S2PN-CD-P4	Moment Stiffness	N/A
CXN50200-S2PN-CD-P4	Pitch / Yaw	N/A
CXN50200-S2PN-CD-P4	Parallelism (µm)	15
CXN50200-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXN50200-S2PN-CD-P4	Dynamic Parallelism (µm)	15
CXN50200-S2PN-CD-P4	Motor Type	5-Phase Stepper
CXN50200-S2PN-CD-P4	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50200-S2PN-CD-P4	Motor Brand	Sanyo
CXN50200-S2PN-CD-P4	Motor Model	SH5285-7211
CXN50200-S2PN-CD-P4	Driver Brand	Please refer to reference table
CXN50200-S2PN-CD-P4	Driver Model	Please refer to reference table
CXN50200-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50200-S2PN-CD-P4	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50200-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50200-S2PN-CD-P4	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50200-S2PN-CD-P4	Power Voltage	24V ± 10%
CXN50200-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXN50200-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXN50200-F2PN-CD-P4	Table Size (mm)	50 × 50
CXN50200-F2PN-CD-P4	Travel Stroke (mm)	200
CXN50200-F2PN-CD-P4	Drive Type	Ball Screw Ø8，Lead 4mm
CXN50200-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXN50200-F2PN-CD-P4	Stage Material	F：Carbon Steel
CXN50200-F2PN-CD-P4	Surface Treatment	Nickel Plating
CXN50200-F2PN-CD-P4	Main Unit Weight (Kg)	1.76
CXN50200-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXN50200-F2PN-CD-P4	Accuracy Level	Precision
CXN50200-F2PN-CD-P4	Wiring Method	GMT Standard
CXN50200-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) /4 (Half)
CXN50200-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXN50200-F2PN-CD-P4	Positioning Presion (µm)	15
CXN50200-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXN50200-F2PN-CD-P4	Multi-point Repeatability Precision(µm)	N/A
CXN50200-F2PN-CD-P4	Load Capacity (Kgf)	10
CXN50200-F2PN-CD-P4	Missed Step (µm)	1
CXN50200-F2PN-CD-P4	Moment Stiffness	N/A
CXN50200-F2PN-CD-P4	Pitch / Yaw	N/A
CXN50200-F2PN-CD-P4	Parallelism (µm)	15
CXN50200-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXN50200-F2PN-CD-P4	Dynamic Parallelism (µm)	15
CXN50200-F2PN-CD-P4	Motor Type	5-Phase Stepper
CXN50200-F2PN-CD-P4	Motor Shaft Numbers	☐ 28 Double Shafts
CXN50200-F2PN-CD-P4	Motor Brand	Sanyo
CXN50200-F2PN-CD-P4	Motor Model	SH5285-7211
CXN50200-F2PN-CD-P4	Driver Brand	Please refer to reference table
CXN50200-F2PN-CD-P4	Driver Model	Please refer to reference table
CXN50200-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXN50200-F2PN-CD-P4	Controller Side Connetor	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXN50200-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXN50200-F2PN-CD-P4	Limit Sensor	Photoelectric sensor GMT-sensor
CXN50200-F2PN-CD-P4	Power Voltage	24V ± 10%
CXN50200-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXN50200-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)

System Configuration Diagram

♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.

♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

Vertical movement direction is Z axis.

Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

Green arrows present the specified axis movement direction.

Inquiry - CXN50 - Precision

Name*

Email*

Contact Number*

Message (optional)