CXC80 - Precision

Category: Motorized Stages

Description

★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel

Model No.	Specification	Value
CXC8030-S2PN-CD-P1	Table Size (mm)	80 × 80
CXC8030-S2PN-CD-P1	Travel Stroke (mm)	30
CXC8030-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC8030-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC8030-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC8030-S2PN-CD-P1	Main Unit Weight (Kg)	1.79
CXC8030-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC8030-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC8030-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC8030-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC8030-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC8030-S2PN-CD-P1	Positioning Presion (µm)	5
CXC8030-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC8030-S2PN-CD-P1	Load Capacity (Kgf)	18
CXC8030-S2PN-CD-P1	Missed Step (µm)	1
CXC8030-S2PN-CD-P1	Parallelism (µm)	20
CXC8030-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXC8030-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC8030-S2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8030-S2PN-CD-P1	Motor Brand / Model	SANYO / SH5281-7211
CXC8030-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC8030-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8030-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8030-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8030-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC8030-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC8030-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC8030-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8030-F2PN-CD-P1	Table Size (mm)	80 × 80
CXC8030-F2PN-CD-P1	Travel Stroke (mm)	30
CXC8030-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC8030-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC8030-F2PN-CD-P1	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC8030-F2PN-CD-P1	Main Unit Weight (Kg)	1.79
CXC8030-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC8030-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC8030-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC8030-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC8030-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC8030-F2PN-CD-P1	Positioning Presion (µm)	5
CXC8030-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC8030-F2PN-CD-P1	Load Capacity (Kgf)	18
CXC8030-F2PN-CD-P1	Missed Step (µm)	1
CXC8030-F2PN-CD-P1	Parallelism (µm)	20
CXC8030-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXC8030-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC8030-F2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8030-F2PN-CD-P1	Motor Brand / Model	SANYO / SH5281-7211
CXC8030-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC8030-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8030-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8030-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8030-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC8030-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC8030-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC8030-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8030-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC8030-S2PN-CD-P2	Travel Stroke (mm)	30
CXC8030-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC8030-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC8030-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC8030-S2PN-CD-P2	Main Unit Weight (Kg)	1.79
CXC8030-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC8030-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC8030-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC8030-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC8030-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC8030-S2PN-CD-P2	Positioning Presion (µm)	5
CXC8030-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC8030-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC8030-S2PN-CD-P2	Missed Step (µm)	1
CXC8030-S2PN-CD-P2	Parallelism (µm)	20
CXC8030-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXC8030-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC8030-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8030-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5281-7211
CXC8030-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC8030-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8030-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8030-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8030-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC8030-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC8030-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC8030-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8030-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC8030-F2PN-CD-P2	Travel Stroke (mm)	30
CXC8030-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC8030-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC8030-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC8030-F2PN-CD-P2	Main Unit Weight (Kg)	1.79
CXC8030-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC8030-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC8030-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC8030-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC8030-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC8030-F2PN-CD-P2	Positioning Presion (µm)	5
CXC8030-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC8030-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC8030-F2PN-CD-P2	Missed Step (µm)	1
CXC8030-F2PN-CD-P2	Parallelism (µm)	20
CXC8030-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXC8030-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC8030-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8030-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5281-7211
CXC8030-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC8030-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8030-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8030-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8030-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC8030-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC8030-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC8030-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8050-S2PN-CD-P1	Table Size (mm)	80 × 80
CXC8050-S2PN-CD-P1	Travel Stroke (mm)	50
CXC8050-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC8050-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC8050-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC8050-S2PN-CD-P1	Main Unit Weight (Kg)	1.86
CXC8050-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC8050-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC8050-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC8050-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC8050-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC8050-S2PN-CD-P1	Positioning Presion (µm)	5
CXC8050-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC8050-S2PN-CD-P1	Load Capacity (Kgf)	18
CXC8050-S2PN-CD-P1	Missed Step (µm)	1
CXC8050-S2PN-CD-P1	Parallelism (µm)	20
CXC8050-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXC8050-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC8050-S2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8050-S2PN-CD-P1	Motor Brand / Model	SANYO / SH5281-7211
CXC8050-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC8050-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8050-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8050-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8050-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC8050-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC8050-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC8050-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8050-F2PN-CD-P1	Table Size (mm)	80 × 80
CXC8050-F2PN-CD-P1	Travel Stroke (mm)	50
CXC8050-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC8050-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC8050-F2PN-CD-P1	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC8050-F2PN-CD-P1	Main Unit Weight (Kg)	1.86
CXC8050-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC8050-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC8050-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC8050-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC8050-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC8050-F2PN-CD-P1	Positioning Presion (µm)	5
CXC8050-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC8050-F2PN-CD-P1	Load Capacity (Kgf)	18
CXC8050-F2PN-CD-P1	Missed Step (µm)	1
CXC8050-F2PN-CD-P1	Parallelism (µm)	20
CXC8050-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXC8050-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC8050-F2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8050-F2PN-CD-P1	Motor Brand / Model	SANYO / SH5281-7211
CXC8050-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC8050-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8050-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8050-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8050-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC8050-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC8050-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC8050-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8050-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC8050-S2PN-CD-P2	Travel Stroke (mm)	50
CXC8050-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC8050-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC8050-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC8050-S2PN-CD-P2	Main Unit Weight (Kg)	1.86
CXC8050-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC8050-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC8050-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC8050-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC8050-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC8050-S2PN-CD-P2	Positioning Presion (µm)	5
CXC8050-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC8050-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC8050-S2PN-CD-P2	Missed Step (µm)	1
CXC8050-S2PN-CD-P2	Parallelism (µm)	20
CXC8050-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXC8050-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC8050-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8050-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5281-7211
CXC8050-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC8050-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8050-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8050-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8050-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC8050-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC8050-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC8050-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8050-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC8050-F2PN-CD-P2	Travel Stroke (mm)	50
CXC8050-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC8050-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC8050-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC8050-F2PN-CD-P2	Main Unit Weight (Kg)	1.86
CXC8050-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC8050-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC8050-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC8050-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC8050-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC8050-F2PN-CD-P2	Positioning Presion (µm)	5
CXC8050-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC8050-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC8050-F2PN-CD-P2	Missed Step (µm)	1
CXC8050-F2PN-CD-P2	Parallelism (µm)	20
CXC8050-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXC8050-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC8050-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8050-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5281-7211
CXC8050-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC8050-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8050-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8050-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8050-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC8050-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC8050-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC8050-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8075-S2PN-CD-P1	Table Size (mm)	80 × 80
CXC8075-S2PN-CD-P1	Travel Stroke (mm)	75
CXC8075-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC8075-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC8075-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC8075-S2PN-CD-P1	Main Unit Weight (Kg)	2.03
CXC8075-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC8075-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC8075-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC8075-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC8075-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC8075-S2PN-CD-P1	Positioning Presion (µm)	7
CXC8075-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC8075-S2PN-CD-P1	Load Capacity (Kgf)	18
CXC8075-S2PN-CD-P1	Missed Step (µm)	1
CXC8075-S2PN-CD-P1	Parallelism (µm)	20
CXC8075-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXC8075-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC8075-S2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8075-S2PN-CD-P1	Motor Brand / Model	SANYO / SH5281-7211
CXC8075-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC8075-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8075-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8075-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8075-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC8075-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC8075-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC8075-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8075-F2PN-CD-P1	Table Size (mm)	80 × 80
CXC8075-F2PN-CD-P1	Travel Stroke (mm)	75
CXC8075-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC8075-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC8075-F2PN-CD-P1	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC8075-F2PN-CD-P1	Main Unit Weight (Kg)	2.03
CXC8075-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC8075-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC8075-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC8075-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC8075-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC8075-F2PN-CD-P1	Positioning Presion (µm)	7
CXC8075-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC8075-F2PN-CD-P1	Load Capacity (Kgf)	18
CXC8075-F2PN-CD-P1	Missed Step (µm)	1
CXC8075-F2PN-CD-P1	Parallelism (µm)	20
CXC8075-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXC8075-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC8075-F2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8075-F2PN-CD-P1	Motor Brand / Model	SANYO / SH5281-7211
CXC8075-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC8075-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8075-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8075-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8075-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC8075-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC8075-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC8075-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8075-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC8075-S2PN-CD-P2	Travel Stroke (mm)	75
CXC8075-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC8075-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC8075-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC8075-S2PN-CD-P2	Main Unit Weight (Kg)	2.03
CXC8075-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC8075-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC8075-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC8075-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC8075-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC8075-S2PN-CD-P2	Positioning Presion (µm)	7
CXC8075-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC8075-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC8075-S2PN-CD-P2	Missed Step (µm)	1
CXC8075-S2PN-CD-P2	Parallelism (µm)	20
CXC8075-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXC8075-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC8075-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8075-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5281-7211
CXC8075-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC8075-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8075-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8075-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8075-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC8075-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC8075-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC8075-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC8075-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC8075-F2PN-CD-P2	Travel Stroke (mm)	75
CXC8075-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC8075-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC8075-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC8075-F2PN-CD-P2	Main Unit Weight (Kg)	2.03
CXC8075-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC8075-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC8075-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC8075-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC8075-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC8075-F2PN-CD-P2	Positioning Presion (µm)	7
CXC8075-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC8075-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC8075-F2PN-CD-P2	Missed Step (µm)	1
CXC8075-F2PN-CD-P2	Parallelism (µm)	20
CXC8075-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXC8075-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC8075-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC8075-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5281-7211
CXC8075-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC8075-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC8075-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC8075-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC8075-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC8075-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC8075-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC8075-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)

Model No.	Specification	Value
CXC80100-S2PN-CD-P1	Table Size (mm)	80 × 80
CXC80100-S2PN-CD-P1	Travel Stroke (mm)	100
CXC80100-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC80100-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC80100-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80100-S2PN-CD-P1	Main Unit Weight (Kg)	2.2
CXC80100-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC80100-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC80100-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC80100-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC80100-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC80100-S2PN-CD-P1	Positioning Presion (µm)	10
CXC80100-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC80100-S2PN-CD-P1	Load Capacity (Kgf)	18
CXC80100-S2PN-CD-P1	Missed Step (µm)	1
CXC80100-S2PN-CD-P1	Parallelism (µm)	20
CXC80100-S2PN-CD-P1	Dynamic Straightness (µm)	4
CXC80100-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC80100-S2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80100-S2PN-CD-P1	Brand / Model	SANYO / SH5285-7211
CXC80100-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC80100-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80100-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80100-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80100-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC80100-S2PN-CD-P1	Limit Sensor	N / A
CXC80100-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC80100-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC80100-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80100-F2PN-CD-P1	Table Size (mm)	80 × 80
CXC80100-F2PN-CD-P1	Travel Stroke (mm)	100
CXC80100-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC80100-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC80100-F2PN-CD-P1	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80100-F2PN-CD-P1	Main Unit Weight (Kg)	2.5
CXC80100-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC80100-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC80100-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC80100-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC80100-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC80100-F2PN-CD-P1	Positioning Presion (µm)	10
CXC80100-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC80100-F2PN-CD-P1	Load Capacity (Kgf)	18
CXC80100-F2PN-CD-P1	Missed Step (µm)	1
CXC80100-F2PN-CD-P1	Parallelism (µm)	20
CXC80100-F2PN-CD-P1	Dynamic Straightness (µm)	4
CXC80100-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC80100-F2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80100-F2PN-CD-P1	Brand / Model	SANYO / SH5285-7211
CXC80100-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC80100-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80100-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80100-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80100-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC80100-F2PN-CD-P1	Limit Sensor	N / A
CXC80100-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC80100-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC80100-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80100-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC80100-S2PN-CD-P2	Travel Stroke (mm)	100
CXC80100-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80100-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80100-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80100-S2PN-CD-P2	Main Unit Weight (Kg)	2.2
CXC80100-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80100-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80100-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80100-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80100-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80100-S2PN-CD-P2	Positioning Presion (µm)	10
CXC80100-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80100-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC80100-S2PN-CD-P2	Missed Step (µm)	1
CXC80100-S2PN-CD-P2	Parallelism (µm)	20
CXC80100-S2PN-CD-P2	Dynamic Straightness (µm)	4
CXC80100-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC80100-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80100-S2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80100-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80100-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80100-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80100-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80100-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80100-S2PN-CD-P2	Limit Sensor	N / A
CXC80100-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC80100-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80100-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80100-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC80100-F2PN-CD-P2	Travel Stroke (mm)	100
CXC80100-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80100-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80100-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80100-F2PN-CD-P2	Main Unit Weight (Kg)	2.5
CXC80100-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80100-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80100-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80100-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80100-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80100-F2PN-CD-P2	Positioning Presion (µm)	10
CXC80100-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80100-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC80100-F2PN-CD-P2	Missed Step (µm)	1
CXC80100-F2PN-CD-P2	Parallelism (µm)	20
CXC80100-F2PN-CD-P2	Dynamic Straightness (µm)	4
CXC80100-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC80100-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80100-F2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80100-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80100-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80100-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80100-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80100-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80100-F2PN-CD-P2	Limit Sensor	N / A
CXC80100-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC80100-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80100-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80150-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC80150-S2PN-CD-P2	Travel Stroke (mm)	150
CXC80150-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80150-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80150-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80150-S2PN-CD-P2	Main Unit Weight (Kg)	2.78
CXC80150-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80150-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80150-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80150-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80150-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80150-S2PN-CD-P2	Positioning Presion (µm)	15
CXC80150-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80150-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC80150-S2PN-CD-P2	Missed Step (µm)	1
CXC80150-S2PN-CD-P2	Parallelism (µm)	20
CXC80150-S2PN-CD-P2	Dynamic Straightness (µm)	4
CXC80150-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC80150-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80150-S2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80150-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80150-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80150-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80150-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80150-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80150-S2PN-CD-P2	Limit Sensor	N / A
CXC80150-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC80150-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80150-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80150-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC80150-F2PN-CD-P2	Travel Stroke (mm)	150
CXC80150-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80150-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80150-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80150-F2PN-CD-P2	Main Unit Weight (Kg)	2.78
CXC80150-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80150-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80150-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80150-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80150-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80150-F2PN-CD-P2	Positioning Presion (µm)	15
CXC80150-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80150-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC80150-F2PN-CD-P2	Missed Step (µm)	1
CXC80150-F2PN-CD-P2	Parallelism (µm)	20
CXC80150-F2PN-CD-P2	Dynamic Straightness (µm)	4
CXC80150-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC80150-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80150-F2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80150-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80150-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80150-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80150-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80150-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80150-F2PN-CD-P2	Limit Sensor	N / A
CXC80150-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC80150-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80150-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80150-S2PN-CD-P4	Table Size (mm)	80 × 80
CXC80150-S2PN-CD-P4	Travel Stroke (mm)	150
CXC80150-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80150-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80150-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80150-S2PN-CD-P4	Main Unit Weight (Kg)	2.78
CXC80150-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80150-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80150-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80150-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80150-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80150-S2PN-CD-P4	Positioning Presion (µm)	15
CXC80150-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80150-S2PN-CD-P4	Load Capacity (Kgf)	18
CXC80150-S2PN-CD-P4	Missed Step (µm)	1
CXC80150-S2PN-CD-P4	Parallelism (µm)	20
CXC80150-S2PN-CD-P4	Dynamic Straightness (µm)	4
CXC80150-S2PN-CD-P4	Dynamic Parallelism (µm)	10
CXC80150-S2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80150-S2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80150-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80150-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80150-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80150-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80150-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80150-S2PN-CD-P4	Limit Sensor	N / A
CXC80150-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC80150-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80150-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80150-F2PN-CD-P4	Table Size (mm)	80 × 80
CXC80150-F2PN-CD-P4	Travel Stroke (mm)	150
CXC80150-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80150-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80150-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80150-F2PN-CD-P4	Main Unit Weight (Kg)	2.78
CXC80150-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80150-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80150-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80150-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80150-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80150-F2PN-CD-P4	Positioning Presion (µm)	15
CXC80150-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80150-F2PN-CD-P4	Load Capacity (Kgf)	18
CXC80150-F2PN-CD-P4	Missed Step (µm)	1
CXC80150-F2PN-CD-P4	Parallelism (µm)	20
CXC80150-F2PN-CD-P4	Dynamic Straightness (µm)	4
CXC80150-F2PN-CD-P4	Dynamic Parallelism (µm)	10
CXC80150-F2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80150-F2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80150-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80150-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80150-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80150-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80150-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80150-F2PN-CD-P4	Limit Sensor	N / A
CXC80150-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC80150-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80150-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80200-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC80200-S2PN-CD-P2	Travel Stroke (mm)	200
CXC80200-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80200-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80200-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80200-S2PN-CD-P2	Main Unit Weight (Kg)	2.78
CXC80200-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80200-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80200-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80200-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80200-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80200-S2PN-CD-P2	Positioning Presion (µm)	15
CXC80200-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80200-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC80200-S2PN-CD-P2	Missed Step (µm)	1
CXC80200-S2PN-CD-P2	Parallelism (µm)	20
CXC80200-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXC80200-S2PN-CD-P2	Dynamic Parallelism (µm)	15
CXC80200-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80200-S2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80200-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80200-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80200-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80200-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80200-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80200-S2PN-CD-P2	Limit Sensor	N / A
CXC80200-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC80200-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80200-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80200-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC80200-F2PN-CD-P2	Travel Stroke (mm)	200
CXC80200-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80200-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80200-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80200-F2PN-CD-P2	Main Unit Weight (Kg)	2.78
CXC80200-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80200-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80200-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80200-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80200-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80200-F2PN-CD-P2	Positioning Presion (µm)	15
CXC80200-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80200-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC80200-F2PN-CD-P2	Missed Step (µm)	1
CXC80200-F2PN-CD-P2	Parallelism (µm)	20
CXC80200-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXC80200-F2PN-CD-P2	Dynamic Parallelism (µm)	15
CXC80200-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80200-F2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80200-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80200-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80200-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80200-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80200-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80200-F2PN-CD-P2	Limit Sensor	N / A
CXC80200-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC80200-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80200-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80200-S2PN-CD-P4	Table Size (mm)	80 × 80
CXC80200-S2PN-CD-P4	Travel Stroke (mm)	200
CXC80200-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80200-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80200-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80200-S2PN-CD-P4	Main Unit Weight (Kg)	2.78
CXC80200-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80200-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80200-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80200-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80200-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80200-S2PN-CD-P4	Positioning Presion (µm)	15
CXC80200-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80200-S2PN-CD-P4	Load Capacity (Kgf)	18
CXC80200-S2PN-CD-P4	Missed Step (µm)	1
CXC80200-S2PN-CD-P4	Parallelism (µm)	20
CXC80200-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXC80200-S2PN-CD-P4	Dynamic Parallelism (µm)	15
CXC80200-S2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80200-S2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80200-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80200-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80200-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80200-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80200-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80200-S2PN-CD-P4	Limit Sensor	N / A
CXC80200-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC80200-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80200-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80200-F2PN-CD-P4	Table Size (mm)	80 × 80
CXC80200-F2PN-CD-P4	Travel Stroke (mm)	200
CXC80200-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80200-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80200-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80200-F2PN-CD-P4	Main Unit Weight (Kg)	2.78
CXC80200-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80200-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80200-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80200-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80200-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80200-F2PN-CD-P4	Positioning Presion (µm)	15
CXC80200-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80200-F2PN-CD-P4	Load Capacity (Kgf)	18
CXC80200-F2PN-CD-P4	Missed Step (µm)	1
CXC80200-F2PN-CD-P4	Parallelism (µm)	20
CXC80200-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXC80200-F2PN-CD-P4	Dynamic Parallelism (µm)	15
CXC80200-F2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80200-F2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80200-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80200-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80200-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80200-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80200-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80200-F2PN-CD-P4	Limit Sensor	N / A
CXC80200-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC80200-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80200-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)

Model No.	Specification	Value
CXC80250-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC80250-S2PN-CD-P2	Travel Stroke (mm)	250
CXC80250-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80250-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80250-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80250-S2PN-CD-P2	Main Unit Weight (Kg)	3.08
CXC80250-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80250-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80250-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80250-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80250-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80250-S2PN-CD-P2	Positioning Presion (µm)	25
CXC80250-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80250-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC80250-S2PN-CD-P2	Missed Step (µm)	1
CXC80250-S2PN-CD-P2	Parallelism (µm)	20
CXC80250-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXC80250-S2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC80250-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80250-S2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80250-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80250-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80250-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80250-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80250-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80250-S2PN-CD-P2	Limit Sensor	N / A
CXC80250-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC80250-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80250-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80250-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC80250-F2PN-CD-P2	Travel Stroke (mm)	250
CXC80250-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80250-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80250-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80250-F2PN-CD-P2	Main Unit Weight (Kg)	3.08
CXC80250-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80250-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80250-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80250-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80250-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80250-F2PN-CD-P2	Positioning Presion (µm)	25
CXC80250-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80250-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC80250-F2PN-CD-P2	Missed Step (µm)	1
CXC80250-F2PN-CD-P2	Parallelism (µm)	20
CXC80250-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXC80250-F2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC80250-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80250-F2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80250-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80250-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80250-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80250-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80250-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80250-F2PN-CD-P2	Limit Sensor	N / A
CXC80250-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC80250-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80250-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80250-S2PN-CD-P4	Table Size (mm)	80 × 80
CXC80250-S2PN-CD-P4	Travel Stroke (mm)	250
CXC80250-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80250-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80250-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80250-S2PN-CD-P4	Main Unit Weight (Kg)	3.08
CXC80250-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80250-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80250-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80250-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80250-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80250-S2PN-CD-P4	Positioning Presion (µm)	25
CXC80250-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80250-S2PN-CD-P4	Load Capacity (Kgf)	18
CXC80250-S2PN-CD-P4	Missed Step (µm)	1
CXC80250-S2PN-CD-P4	Parallelism (µm)	20
CXC80250-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXC80250-S2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC80250-S2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80250-S2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80250-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80250-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80250-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80250-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80250-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80250-S2PN-CD-P4	Limit Sensor	N / A
CXC80250-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC80250-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80250-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80250-F2PN-CD-P4	Table Size (mm)	80 × 80
CXC80250-F2PN-CD-P4	Travel Stroke (mm)	250
CXC80250-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80250-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80250-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80250-F2PN-CD-P4	Main Unit Weight (Kg)	3.08
CXC80250-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80250-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80250-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80250-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80250-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80250-F2PN-CD-P4	Positioning Presion (µm)	25
CXC80250-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80250-F2PN-CD-P4	Load Capacity (Kgf)	18
CXC80250-F2PN-CD-P4	Missed Step (µm)	1
CXC80250-F2PN-CD-P4	Parallelism (µm)	20
CXC80250-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXC80250-F2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC80250-F2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80250-F2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80250-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80250-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80250-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80250-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80250-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80250-F2PN-CD-P4	Limit Sensor	N / A
CXC80250-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC80250-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80250-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80300-S2PN-CD-P2	Table Size (mm)	80 × 80
CXC80300-S2PN-CD-P2	Travel Stroke (mm)	300
CXC80300-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80300-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80300-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80300-S2PN-CD-P2	Main Unit Weight (Kg)	3.38
CXC80300-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80300-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80300-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80300-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80300-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80300-S2PN-CD-P2	Positioning Presion (µm)	25
CXC80300-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80300-S2PN-CD-P2	Load Capacity (Kgf)	18
CXC80300-S2PN-CD-P2	Missed Step (µm)	1
CXC80300-S2PN-CD-P2	Parallelism (µm)	20
CXC80300-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXC80300-S2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC80300-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80300-S2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80300-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80300-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80300-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80300-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80300-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80300-S2PN-CD-P2	Limit Sensor	N / A
CXC80300-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC80300-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80300-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80300-F2PN-CD-P2	Table Size (mm)	80 × 80
CXC80300-F2PN-CD-P2	Travel Stroke (mm)	300
CXC80300-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC80300-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC80300-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80300-F2PN-CD-P2	Main Unit Weight (Kg)	3.38
CXC80300-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC80300-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC80300-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC80300-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC80300-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC80300-F2PN-CD-P2	Positioning Presion (µm)	25
CXC80300-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC80300-F2PN-CD-P2	Load Capacity (Kgf)	18
CXC80300-F2PN-CD-P2	Missed Step (µm)	1
CXC80300-F2PN-CD-P2	Parallelism (µm)	20
CXC80300-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXC80300-F2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC80300-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80300-F2PN-CD-P2	Brand / Model	SANYO / SH5285-7211
CXC80300-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC80300-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80300-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80300-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80300-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC80300-F2PN-CD-P2	Limit Sensor	N / A
CXC80300-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC80300-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC80300-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80300-S2PN-CD-P4	Table Size (mm)	80 × 80
CXC80300-S2PN-CD-P4	Travel Stroke (mm)	300
CXC80300-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80300-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80300-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC80300-S2PN-CD-P4	Main Unit Weight (Kg)	3.38
CXC80300-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80300-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80300-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80300-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80300-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80300-S2PN-CD-P4	Positioning Presion (µm)	25
CXC80300-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80300-S2PN-CD-P4	Load Capacity (Kgf)	18
CXC80300-S2PN-CD-P4	Missed Step (µm)	1
CXC80300-S2PN-CD-P4	Parallelism (µm)	20
CXC80300-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXC80300-S2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC80300-S2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80300-S2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80300-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80300-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80300-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80300-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80300-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80300-S2PN-CD-P4	Limit Sensor	N / A
CXC80300-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC80300-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80300-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC80300-F2PN-CD-P4	Table Size (mm)	80 × 80
CXC80300-F2PN-CD-P4	Travel Stroke (mm)	300
CXC80300-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC80300-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC80300-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC80300-F2PN-CD-P4	Main Unit Weight (Kg)	3.38
CXC80300-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC80300-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC80300-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC80300-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC80300-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC80300-F2PN-CD-P4	Positioning Presion (µm)	25
CXC80300-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC80300-F2PN-CD-P4	Load Capacity (Kgf)	18
CXC80300-F2PN-CD-P4	Missed Step (µm)	1
CXC80300-F2PN-CD-P4	Parallelism (µm)	20
CXC80300-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXC80300-F2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC80300-F2PN-CD-P4	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC80300-F2PN-CD-P4	Brand / Model	SANYO / SH5285-7211
CXC80300-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC80300-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC80300-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC80300-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC80300-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor
CXC80300-F2PN-CD-P4	Limit Sensor	N / A
CXC80300-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC80300-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC80300-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)

System Configuration Diagram

♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.

♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

Vertical movement direction is Z axis.

Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

Green arrows present the specified axis movement direction.

Inquiry - CXC80 - Precision

Name*

Email*

Contact Number*

Message (optional)