Share:
★ Guide-Linear ball, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel
|
Model No. |
Specification |
Value |
|---|---|---|
|
CZLS5020-S2PN-CD |
Table Size (mm) |
50 × 50 |
|
CZLS5020-S2PN-CD |
Travel Stroke (mm) |
20 |
|
CZLS5020-S2PN-CD |
Drive Type |
Ball screw Ø8, lead 1mm |
|
CZLS5020-S2PN-CD |
Rail |
Linear Ball Guiding |
|
CZLS5020-S2PN-CD |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CZLS5020-S2PN-CD |
Main Unit Weight (Kg) |
0.64 |
|
CZLS5020-S2PN-CD |
Coupling |
FAMCS11.6-5*5 |
|
CZLS5020-S2PN-CD |
Accuracy Level |
P：Precision grade |
|
CZLS5020-S2PN-CD |
Wiring Method |
N：GMT Standard |
|
CZLS5020-S2PN-CD |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CZLS5020-S2PN-CD |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CZLS5020-S2PN-CD |
Positioning Presion (µm) |
5 |
|
CZLS5020-S2PN-CD |
Repeatability Precision (µm) |
±0.5 |
|
CZLS5020-S2PN-CD |
Load Capacity (Kgf) |
4 |
|
CZLS5020-S2PN-CD |
Missed Step (µm) |
1 |
|
CZLS5020-S2PN-CD |
Parallelism (µm) |
20 |
|
CZLS5020-S2PN-CD |
Dynamic Straightness (µm) |
2 |
|
CZLS5020-S2PN-CD |
Dynamic Parallelism (µm) |
10 |
|
CZLS5020-S2PN-CD |
Type / Shaft Numbers |
5-phase stepper / ☐ 42 double shafts |
|
CZLS5020-S2PN-CD |
Brand / Model |
SANYO / 103F5510-8211 |
|
CZLS5020-S2PN-CD |
Driver Brand / Model |
Please refer to reference table |
|
CZLS5020-S2PN-CD |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CZLS5020-S2PN-CD |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CZLS5020-S2PN-CD |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CZLS5020-S2PN-CD |
Limit Sensor |
Origin Approximation Sensor |
|
CZLS5020-S2PN-CD |
Limit Sensor |
N / A |
|
CZLS5020-S2PN-CD |
Power Voltage |
24V ± 10% |
|
CZLS5020-S2PN-CD |
Control Output |
NPN open collector output under 24V 8mA |
|
CZLS5020-S2PN-CD |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CZLS5020-F2PN-CD |
Table Size (mm) |
50 × 50 |
|
CZLS5020-F2PN-CD |
Travel Stroke (mm) |
20 |
|
CZLS5020-F2PN-CD |
Drive Type |
Ball screw Ø8, lead 1mm |
|
CZLS5020-F2PN-CD |
Rail |
Linear Ball Guiding |
|
CZLS5020-F2PN-CD |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CZLS5020-F2PN-CD |
Main Unit Weight (Kg) |
0.64 |
|
CZLS5020-F2PN-CD |
Coupling |
FAMCS11.6-5*5 |
|
CZLS5020-F2PN-CD |
Accuracy Level |
P：Precision grade |
|
CZLS5020-F2PN-CD |
Wiring Method |
N：GMT Standard |
|
CZLS5020-F2PN-CD |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CZLS5020-F2PN-CD |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CZLS5020-F2PN-CD |
Positioning Presion (µm) |
5 |
|
CZLS5020-F2PN-CD |
Repeatability Precision (µm) |
±0.5 |
|
CZLS5020-F2PN-CD |
Load Capacity (Kgf) |
4 |
|
CZLS5020-F2PN-CD |
Missed Step (µm) |
1 |
|
CZLS5020-F2PN-CD |
Parallelism (µm) |
20 |
|
CZLS5020-F2PN-CD |
Dynamic Straightness (µm) |
2 |
|
CZLS5020-F2PN-CD |
Dynamic Parallelism (µm) |
10 |
|
CZLS5020-F2PN-CD |
Type / Shaft Numbers |
5-phase stepper / ☐ 42 double shafts |
|
CZLS5020-F2PN-CD |
Brand / Model |
SANYO / 103F5510-8211 |
|
CZLS5020-F2PN-CD |
Driver Brand / Model |
Please refer to reference table |
|
CZLS5020-F2PN-CD |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CZLS5020-F2PN-CD |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CZLS5020-F2PN-CD |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CZLS5020-F2PN-CD |
Limit Sensor |
Origin Approximation Sensor |
|
CZLS5020-F2PN-CD |
Limit Sensor |
N / A |
|
CZLS5020-F2PN-CD |
Power Voltage |
24V ± 10% |
|
CZLS5020-F2PN-CD |
Control Output |
NPN open collector output under 24V 8mA |
|
CZLS5020-F2PN-CD |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CZLS5030-S2PN-CD |
Table Size (mm) |
50 × 50 |
|
CZLS5030-S2PN-CD |
Travel Stroke (mm) |
30 |
|
CZLS5030-S2PN-CD |
Drive Type |
Ball screw Ø8, lead 1mm |
|
CZLS5030-S2PN-CD |
Rail |
Linear Ball Guiding |
|
CZLS5030-S2PN-CD |
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating |
|
CZLS5030-S2PN-CD |
Main Unit Weight (Kg) |
0.79 |
|
CZLS5030-S2PN-CD |
Coupling |
FAMCS11.6-5*5 |
|
CZLS5030-S2PN-CD |
Accuracy Level |
P：Precision grade |
|
CZLS5030-S2PN-CD |
Wiring Method |
N：GMT Standard |
|
CZLS5030-S2PN-CD |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CZLS5030-S2PN-CD |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CZLS5030-S2PN-CD |
Positioning Presion (µm) |
5 |
|
CZLS5030-S2PN-CD |
Repeatability Precision (µm) |
±0.5 |
|
CZLS5030-S2PN-CD |
Load Capacity (Kgf) |
4 |
|
CZLS5030-S2PN-CD |
Missed Step (µm) |
1 |
|
CZLS5030-S2PN-CD |
Parallelism (µm) |
20 |
|
CZLS5030-S2PN-CD |
Dynamic Straightness (µm) |
2 |
|
CZLS5030-S2PN-CD |
Dynamic Parallelism (µm) |
10 |
|
CZLS5030-S2PN-CD |
Type / Shaft Numbers |
5-phase stepper / ☐ 42 double shafts |
|
CZLS5030-S2PN-CD |
Brand / Model |
SANYO / 103F5510-8211 |
|
CZLS5030-S2PN-CD |
Driver Brand / Model |
Please refer to reference table |
|
CZLS5030-S2PN-CD |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CZLS5030-S2PN-CD |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CZLS5030-S2PN-CD |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CZLS5030-S2PN-CD |
Limit Sensor |
Origin Approximation Sensor |
|
CZLS5030-S2PN-CD |
Limit Sensor |
N / A |
|
CZLS5030-S2PN-CD |
Power Voltage |
24V ± 10% |
|
CZLS5030-S2PN-CD |
Control Output |
NPN open collector output under 24V 8mA |
|
CZLS5030-S2PN-CD |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CZLS5030-F2PN-CD |
Table Size (mm) |
50 × 50 |
|
CZLS5030-F2PN-CD |
Travel Stroke (mm) |
30 |
|
CZLS5030-F2PN-CD |
Drive Type |
Ball screw Ø8, lead 1mm |
|
CZLS5030-F2PN-CD |
Rail |
Linear Ball Guiding |
|
CZLS5030-F2PN-CD |
Stage Material / Surface Treatment |
F：Carbon Steel / Nickel Plating |
|
CZLS5030-F2PN-CD |
Main Unit Weight (Kg) |
0.79 |
|
CZLS5030-F2PN-CD |
Coupling |
FAMCS11.6-5*5 |
|
CZLS5030-F2PN-CD |
Accuracy Level |
P：Precision grade |
|
CZLS5030-F2PN-CD |
Wiring Method |
N：GMT Standard |
|
CZLS5030-F2PN-CD |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CZLS5030-F2PN-CD |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CZLS5030-F2PN-CD |
Positioning Presion (µm) |
5 |
|
CZLS5030-F2PN-CD |
Repeatability Precision (µm) |
±0.5 |
|
CZLS5030-F2PN-CD |
Load Capacity (Kgf) |
4 |
|
CZLS5030-F2PN-CD |
Missed Step (µm) |
1 |
|
CZLS5030-F2PN-CD |
Parallelism (µm) |
20 |
|
CZLS5030-F2PN-CD |
Dynamic Straightness (µm) |
2 |
|
CZLS5030-F2PN-CD |
Dynamic Parallelism (µm) |
10 |
|
CZLS5030-F2PN-CD |
Type / Shaft Numbers |
5-phase stepper / ☐ 42 double shafts |
|
CZLS5030-F2PN-CD |
Brand / Model |
SANYO / 103F5510-8211 |
|
CZLS5030-F2PN-CD |
Driver Brand / Model |
Please refer to reference table |
|
CZLS5030-F2PN-CD |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CZLS5030-F2PN-CD |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CZLS5030-F2PN-CD |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CZLS5030-F2PN-CD |
Limit Sensor |
Origin Approximation Sensor |
|
CZLS5030-F2PN-CD |
Limit Sensor |
N / A |
|
CZLS5030-F2PN-CD |
Power Voltage |
24V ± 10% |
|
CZLS5030-F2PN-CD |
Control Output |
NPN open collector output under 24V 8mA |
|
CZLS5030-F2PN-CD |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
|
Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Inquiry - CZLS50 - Precision
