Share:
★ Guide-Linear ball, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel
|
Model No. |
Specification |
Value |
|---|---|---|
|
CXS5020-S2PN-ND |
Table Size (mm) |
50 × 50 |
|
CXS5020-S2PN-ND |
Travel Stroke (mm) |
20 |
|
CXS5020-S2PN-ND |
Drive Type |
Ball Screw Ø8，Lead 1mm |
|
CXS5020-S2PN-ND |
Rail |
Linear Ball Guiding |
|
CXS5020-S2PN-ND |
Stage Material |
Stainless Steel |
|
CXS5020-S2PN-ND |
Surface Treatment |
Nickel Plating |
|
CXS5020-S2PN-ND |
Main Unit Weight (Kg) |
0.57 |
|
CXS5020-S2PN-ND |
Coupling |
FAMCS11.6-5*5 |
|
CXS5020-S2PN-ND |
Accuracy Level |
Precision |
|
CXS5020-S2PN-ND |
Wiring Method |
GMT Standard |
|
CXS5020-S2PN-ND |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXS5020-S2PN-ND |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXS5020-S2PN-ND |
Positioning Presion (µm) |
5 |
|
CXS5020-S2PN-ND |
Repeatability Precision (µm) |
±0.5 |
|
CXS5020-S2PN-ND |
Multi-point Repeatability Precision(µm) |
N/A |
|
CXS5020-S2PN-ND |
Load Capacity (Kgf) |
6 |
|
CXS5020-S2PN-ND |
Missed Step (µm) |
1 |
|
CXS5020-S2PN-ND |
Moment Stiffness |
N/A |
|
CXS5020-S2PN-ND |
Pitch / Yaw |
N/A |
|
CXS5020-S2PN-ND |
Parallelism (µm) |
20 |
|
CXS5020-S2PN-ND |
Dynamic Straightness (µm) |
2 |
|
CXS5020-S2PN-ND |
Dynamic Parallelism (µm) |
10 |
|
CXS5020-S2PN-ND |
Motor Type |
5-Phase Stepper |
|
CXS5020-S2PN-ND |
Motor Shaft Numbers |
☐ 28 Double Shafts |
|
CXS5020-S2PN-ND |
Motor Brand |
Sanyo |
|
CXS5020-S2PN-ND |
Motor Model |
SH5281-7211 |
|
CXS5020-S2PN-ND |
Driver Brand |
Please refer to reference table |
|
CXS5020-S2PN-ND |
Driver Model |
Please refer to reference table |
|
CXS5020-S2PN-ND |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXS5020-S2PN-ND |
Controller Side Connetor |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXS5020-S2PN-ND |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5020-S2PN-ND |
Limit Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5020-S2PN-ND |
Power Voltage |
24V ± 10% |
|
CXS5020-S2PN-ND |
Control Output |
NPN open collector output under 24V 8mA |
|
CXS5020-S2PN-ND |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXS5020-F2PN-ND |
Table Size (mm) |
50 × 50 |
|
CXS5020-F2PN-ND |
Travel Stroke (mm) |
20 |
|
CXS5020-F2PN-ND |
Drive Type |
Ball Screw Ø8，Lead 1mm |
|
CXS5020-F2PN-ND |
Rail |
Linear Ball Guiding |
|
CXS5020-F2PN-ND |
Stage Material |
Carbon Steel |
|
CXS5020-F2PN-ND |
Surface Treatment |
Nickel Plating |
|
CXS5020-F2PN-ND |
Main Unit Weight (Kg) |
0.57 |
|
CXS5020-F2PN-ND |
Coupling |
FAMCS11.6-5*5 |
|
CXS5020-F2PN-ND |
Accuracy Level |
Precision |
|
CXS5020-F2PN-ND |
Wiring Method |
GMT Standard |
|
CXS5020-F2PN-ND |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXS5020-F2PN-ND |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXS5020-F2PN-ND |
Positioning Presion (µm) |
5 |
|
CXS5020-F2PN-ND |
Repeatability Precision (µm) |
±0.5 |
|
CXS5020-F2PN-ND |
Multi-point Repeatability Precision(µm) |
N/A |
|
CXS5020-F2PN-ND |
Load Capacity (Kgf) |
6 |
|
CXS5020-F2PN-ND |
Missed Step (µm) |
1 |
|
CXS5020-F2PN-ND |
Moment Stiffness |
N/A |
|
CXS5020-F2PN-ND |
Pitch / Yaw |
N/A |
|
CXS5020-F2PN-ND |
Parallelism (µm) |
20 |
|
CXS5020-F2PN-ND |
Dynamic Straightness (µm) |
2 |
|
CXS5020-F2PN-ND |
Dynamic Parallelism (µm) |
10 |
|
CXS5020-F2PN-ND |
Motor Type |
5-Phase Stepper |
|
CXS5020-F2PN-ND |
Motor Shaft Numbers |
☐ 28 Double Shafts |
|
CXS5020-F2PN-ND |
Motor Brand |
Sanyo |
|
CXS5020-F2PN-ND |
Motor Model |
SH5281-7211 |
|
CXS5020-F2PN-ND |
Driver Brand |
Please refer to reference table |
|
CXS5020-F2PN-ND |
Driver Model |
Please refer to reference table |
|
CXS5020-F2PN-ND |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXS5020-F2PN-ND |
Controller Side Connetor |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXS5020-F2PN-ND |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5020-F2PN-ND |
Limit Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5020-F2PN-ND |
Power Voltage |
24V ± 10% |
|
CXS5020-F2PN-ND |
Control Output |
NPN open collector output under 24V 8mA |
|
CXS5020-F2PN-ND |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXS5030-S2PN-ND |
Table Size (mm) |
50 × 50 |
|
CXS5030-S2PN-ND |
Travel Stroke (mm) |
30 |
|
CXS5030-S2PN-ND |
Drive Type |
Ball Screw Ø8，Lead 1mm |
|
CXS5030-S2PN-ND |
Rail |
Linear Ball Guiding |
|
CXS5030-S2PN-ND |
Stage Material |
Stainless Steel |
|
CXS5030-S2PN-ND |
Surface Treatment |
Nickel Plating |
|
CXS5030-S2PN-ND |
Main Unit Weight (Kg) |
0.72 |
|
CXS5030-S2PN-ND |
Coupling |
FAMCS11.6-5*5 |
|
CXS5030-S2PN-ND |
Accuracy Level |
Precision |
|
CXS5030-S2PN-ND |
Wiring Method |
GMT Standard |
|
CXS5030-S2PN-ND |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXS5030-S2PN-ND |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXS5030-S2PN-ND |
Positioning Presion (µm) |
5 |
|
CXS5030-S2PN-ND |
Repeatability Precision (µm) |
±0.5 |
|
CXS5030-S2PN-ND |
Multi-point Repeatability Precision(µm) |
N/A |
|
CXS5030-S2PN-ND |
Load Capacity (Kgf) |
6 |
|
CXS5030-S2PN-ND |
Missed Step (µm) |
1 |
|
CXS5030-S2PN-ND |
Moment Stiffness |
N/A |
|
CXS5030-S2PN-ND |
Pitch / Yaw |
N/A |
|
CXS5030-S2PN-ND |
Parallelism (µm) |
20 |
|
CXS5030-S2PN-ND |
Dynamic Straightness (µm) |
2 |
|
CXS5030-S2PN-ND |
Dynamic Parallelism (µm) |
10 |
|
CXS5030-S2PN-ND |
Motor Type |
5-Phase Stepper |
|
CXS5030-S2PN-ND |
Motor Shaft Numbers |
☐ 28 Double Shafts |
|
CXS5030-S2PN-ND |
Motor Brand |
Sanyo |
|
CXS5030-S2PN-ND |
Motor Model |
SH5281-7211 |
|
CXS5030-S2PN-ND |
Driver Brand |
Please refer to reference table |
|
CXS5030-S2PN-ND |
Driver Model |
Please refer to reference table |
|
CXS5030-S2PN-ND |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXS5030-S2PN-ND |
Controller Side Connetor |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXS5030-S2PN-ND |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5030-S2PN-ND |
Limit Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5030-S2PN-ND |
Power Voltage |
24V ± 10% |
|
CXS5030-S2PN-ND |
Control Output |
NPN open collector output under 24V 8mA |
|
CXS5030-S2PN-ND |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
CXS5030-F2PN-ND |
Table Size (mm) |
50 × 50 |
|
CXS5030-F2PN-ND |
Travel Stroke (mm) |
30 |
|
CXS5030-F2PN-ND |
Drive Type |
Ball Screw Ø8，Lead 1mm |
|
CXS5030-F2PN-ND |
Rail |
Linear Ball Guiding |
|
CXS5030-F2PN-ND |
Stage Material |
Carbon Steel |
|
CXS5030-F2PN-ND |
Surface Treatment |
Nickel Plating |
|
CXS5030-F2PN-ND |
Main Unit Weight (Kg) |
0.72 |
|
CXS5030-F2PN-ND |
Coupling |
FAMCS11.6-5*5 |
|
CXS5030-F2PN-ND |
Accuracy Level |
Precision |
|
CXS5030-F2PN-ND |
Wiring Method |
GMT Standard |
|
CXS5030-F2PN-ND |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|
CXS5030-F2PN-ND |
Max. Speed (Full Step) (mm / sec) |
20 |
|
CXS5030-F2PN-ND |
Positioning Presion (µm) |
5 |
|
CXS5030-F2PN-ND |
Repeatability Precision (µm) |
±0.5 |
|
CXS5030-F2PN-ND |
Multi-point Repeatability Precision(µm) |
N/A |
|
CXS5030-F2PN-ND |
Load Capacity (Kgf) |
6 |
|
CXS5030-F2PN-ND |
Missed Step (µm) |
1 |
|
CXS5030-F2PN-ND |
Moment Stiffness |
N/A |
|
CXS5030-F2PN-ND |
Pitch / Yaw |
N/A |
|
CXS5030-F2PN-ND |
Parallelism (µm) |
20 |
|
CXS5030-F2PN-ND |
Dynamic Straightness (µm) |
2 |
|
CXS5030-F2PN-ND |
Dynamic Parallelism (µm) |
10 |
|
CXS5030-F2PN-ND |
Motor Type |
5-Phase Stepper |
|
CXS5030-F2PN-ND |
Motor Shaft Numbers |
☐ 28 Double Shafts |
|
CXS5030-F2PN-ND |
Motor Brand |
Sanyo |
|
CXS5030-F2PN-ND |
Motor Model |
SH5281-7211 |
|
CXS5030-F2PN-ND |
Driver Brand |
Please refer to reference table |
|
CXS5030-F2PN-ND |
Driver Model |
Please refer to reference table |
|
CXS5030-F2PN-ND |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
CXS5030-F2PN-ND |
Controller Side Connetor |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
CXS5030-F2PN-ND |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5030-F2PN-ND |
Limit Sensor |
Photoelectric sensor GMT-sensor |
|
CXS5030-F2PN-ND |
Power Voltage |
24V ± 10% |
|
CXS5030-F2PN-ND |
Control Output |
NPN open collector output under 24V 8mA |
|
CXS5030-F2PN-ND |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
|
Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Inquiry - CXS50 - Precision
