Share:
The Vibrating Bowl Feeder features a robust automatic airway blow feeder that utilizes a pressurized air system to transport screws through a tube into an automatic drive head, remote presenter or screw dispenser. It is suitable for both handheld and fully automatic systems.
Product Advantages
Low Screw jamming
► The standard screws jamming rate is less than 2/10000, The spring flat washer screw jamming rate is less than 5/10000, and the factory has been strictly tested to ensure the stability of the equipment and ensure continuous and stable production.
Low noise
► Integrally molded special polymer tray, strong wear resistance, reduce the friction between the screw and the tray, reduce the noise, less than 72 db, improve the workshop production environment.
Efficient
► Feeding time up to 40pcs/min, improve production efficiency
Uninterrupted
► Standard material shortage sensor, warning in advance when material shortage occurs, reminding feeding, ensuring the continuity of feeding process and uninterrupted production.
Product Structure
Product Parameters
|
Capacity /L |
Channel type |
Weight /kg |
Rated air pressure /Mpa |
Power source |
Rated power |
Air consumption m3/min |
Inlet pipe diameter /mm |
Noise value* （＞1m）dB |
I/O line /m |
Power cord /m |
Blow screw tube /m |
|
|
1.25 |
Single channel C1 |
22-26 |
0.6 |
Equipment voltage DC24V (guest supply voltage 220V/50Hz) |
120W |
0.25-0.3 |
10 |
75dB (excluding blowing sound of solenoid valve) |
5 |
2 |
5/10 |
|
|
Dual channel C2 |
24-28 |
0.4-0.45 |
|
|||||||||
|
|
* The above is the reference value, and the actual test shall prevail.
Feeder-scope Of Application For Screws
|
Capacity /L |
Screw type |
Screw range |
length of screw /mm |
Maximum Cap Diameter/mm |
LDR |
|
1.25L |
Standard screw |
M3~M2.5 |
M2~M4:≤25 |
4≤D≤12 |
1.5≤L/D≤7.5 |
|
M3~M6 |
1.3≤L/D≤7.5 |
||||
|
Combination screw |
M2~M2.5 |
2≤L/D≤7.5 |
|||
|
M3~M6 |
1.6≤L/D≤7.5 |
Inquiry - Vibration Bowl Feeder
