Schneider LED Pilot Light 220V (White - XA2EVM1LC)

Round pilot light Ø 22 - white - integral LED - 220 V AC - screw clamp terminals
XA2EVM1LC

This product is part of the Easy Harmony XA2 range, an offer of Ø 22mm plastic pushbuttons, switches and pilot lights. This monolithic green pilot light comes with integral LED. This single component pilot light provides clear visual feedback on the status of machines. This pilot light has a 220V to 230V AC rating. This is a plastic component and weighs 0.02kg. It is an IP65 rated product and comes with CE, CCC and EAC certification conforming to GB 14048.1, IEC 60947-1, GB 14048.5 and IEC 60947-5-1 standards. It is sold in lots of 10. It is easily installed into a standard 22mm diameter panel cut-outs and connected to control circuits with screw-clamp connections. It is impact resistant, dust resistant, water resistant and vibration resistant making it suitable for operation in harsh environments.

Main

• Range of product: Harmony XA2
• Product type: Monolithic pilot light
• Bezel material: Plastic
• Mounting diameter: 22.5 mm
• Head shape: Round
• Lens colour: White
• Light source: COB clustered LED
• Bulb base: No bulb
• Device presentation: Monolithic product
• Rated supply voltage: 220–230 V AC, 50/60 Hz

• Device mounting: 22.5 mm fixing hole
• Fixing mode: Fixing nut beneath head
• Rated insulation voltage: 400 V
• Impulse withstands voltage: 6 kV
• Signalling type: Steady
• Current consumption: ≤ 20 mA
• Service life: 40,000 hours
• Dimensions (H × W × D): 29 × 29 × 53 mm
• Net weight: 0.02 kg

• Operating temperature: -25 to 70 °C
• Storage temperature: -40 to 70 °C
• Overvoltage category: Class I
• IP protection: IP65
• IK protection: IK05
• Vibration resistance: 5 gn
• Shock resistance: 30 gn

• CE
• CCC

Dimensions Drawings


e : Clamping thickness: 1 to 6 mm/0.04 to 0.24 in.

Mounting and Clearance
Panel Cut-Out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals


(1) Diameter on finished panel or support
(2) Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm ₀^+0.4 / 0.88 in. ₀^+0.016)