Product outline
You can use multi-channel oscilloscope to monitor
torque vs angle, torque vs rotation speed
in real-time.
It is also suitable for feedback control using voltage ouput.
●Angle & rotation speed from rotary encoder can be monitored simultaneously at voltage -10~+10V.
●You can decide starting point using Z phase signal (UTM Ⅱ only) or external pulse signal
Angle output
Output of rotation speed (*3) (*4)
*3. Able to measure from 1rpm onwards.
*4 .If there is no pulse input after 0.1 seconds, output will return to starting point (0V).
Specifications
Angle signal | -10 to +10V |
---|---|
Rotation speed signal | -10 to +10V |
Resolution of voltage output | Approx. 1/50000 against ±10V |
Non-linearity of voltage output | 0.01%/FS |
Responsitivity of voltage output | DC to 5kHz/-3dB |
Compensated temperature range | -10 to +50℃ |
Temperature effect on span | 0.005%FS/℃ |
Humidity | 85%RH or less (non-condensing) |
Power supply voltage | DC24V±15% |
Consumption current | 0.04A or less |
Dimensions | 28(W)×78(H)×80(D) mm(Projections excluded) |
Weight | Approx.120g |
Attachments | |
Operation manual | 1 |
---|
Accessories
Model | |
CATM(R)21-M | Cable for connection UTM Ⅱ rotary encoder 2m |
---|---|
CATM(R)51-M | Cable for connection UTM Ⅱ rotary encoder 5m |
CATM(R)321-MR | Cable for connection UTM Ⅲ rotary encoder 5m |
CATM(R)351-MR | Cable for connection UTM Ⅲ rotary encoder 5m |
CN91 | Waterproof plasctic connector for UTMⅡ rotary encoder |
External dimention
Download
Product catalogue(PDF)
|
REM catalogue(557 KB) |
---|
Inquiry - REM (Torque Monitor)