Model No. |
AXG4-40VM-3PR-CD |
AXG4-60VM-3PR-CD |
||
Mechanical Spec. |
Table Size (mm) |
40 X 40 |
||
Travel Stroke (°) |
± 8 |
± 6 |
||
Drive Type |
Worm & Worm Gear (Ratio 1 / 240) |
Worm & Worm Gear (Ratio 1 / 335) |
||
Rail |
Crossed Roller Guiding |
|||
Stage Material / Surface Treatment |
Aluminum Alloy / Black Anodized |
|||
Main Unit Weight (Kg) |
0.41 | |||
Coupling |
FAMMS12-3*5 |
|||
Accuracy Level |
P:Precision grade |
|||
Wiring Method |
R:Right Wiring / L:Left Wiring |
|||
Precision Spec. |
Resolution (Pulse) (°) |
≒ 0.003 (Full) ≒ 0.0015 (Half) |
≒ 0.0021 (Full) ≒ 0.00105 (Half) |
|
Max. Speed (Full Step) (° / sec) |
15 |
10.75 |
||
Repeatability Precision (°) |
± 0.003 |
|||
Load Capacity (Kgf) |
3 |
|||
Missed Step (°) |
0.01 |
|||
Dynamic Straightness (mm) |
40 ± 0.15 |
60 ± 0.15 |
||
Dynamic Parallelism (mm) |
0.01 |
|||
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
Brand / Model |
SANYO / SH5281-7211 |
|||
Driver Brand / Model |
Please refer to reference table |
|||
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||
Limit Sensor |
||||
Origin Approximation Sensor |
N / A |
|||
Power Voltage |
24V ± 10% |
|||
Control Output |
NPN open collector output under 24V 8mA |
|||
Output Control |
Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |
|
Inquiry - AXG4 - Precision - Worm & Worm Gear Drive