Model No. |
ARS60-23-A3PN-CD |
ARS60-30-A3PN-CD |
ARS60-I-23-A3PN-CD |
ARS60-I-30-A3PN-CD |
||
Mechanical Spec. |
Table Size (mm) |
Ø 60 |
||||
Travel Stroke (°) |
360 |
|||||
Drive Type |
Worm & Worm Gear (Ratio 1 / 150) |
|||||
Rail |
Crossed Roller Guiding |
|||||
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized |
|||||
Clear Aperture |
Ø 23 mm |
Ø 30 mm |
Ø 0.91" |
Ø 1.18" |
||
Main Unit Weight (Kg) |
0.57 |
|||||
Coupling |
FAMMS12-3*5 |
|||||
Accuracy Level |
P:Precision grade |
|||||
Wiring Method |
N:GMT Standard |
|||||
Precision Spec. |
Resolution (Pulse) (°) |
0.005 (Full);0.0025 (Half) |
||||
Max. Speed (Full Step) (° / sec) |
24 |
|||||
Positioning Presion (°) |
0.05 |
|||||
Repeatability Precision (°) |
± 0.01 |
|||||
Load Capacity (Kgf) |
6 |
|||||
Missed Step (°) |
0.05 |
|||||
Parallelism (µm) |
30 |
|||||
Dynamic Straightness (µm) |
30 | |||||
Dynamic Parallelism (µm) |
20 |
|||||
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|||
Brand / Model |
SANYO / SH5281-7211 |
|||||
Driver Brand / Model |
GMT / GTR-515B |
|||||
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||||
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||||
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||||
Limit Sensor |
||||||
Origin Approximation Sensor |
N / A |
|||||
Power Voltage |
24V ± 10% |
|||||
Control Output |
NPN open collector output under 24V 8mA |
|||||
Output Control |
Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |
|
Inquiry - ARS60 - Precision