CXC60 - Precision

Category: Motorized Stages

Description

★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel, Carbon Steel

Model No.	Specification	Value
CXC6030-S2PN-CD-P1	Table Size (mm)	60 × 60
CXC6030-S2PN-CD-P1	Travel Stroke (mm)	30
CXC6030-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC6030-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC6030-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6030-S2PN-CD-P1	Main Unit Weight (Kg)	1.29
CXC6030-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC6030-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC6030-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC6030-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC6030-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC6030-S2PN-CD-P1	Positioning Presion (µm)	5
CXC6030-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC6030-S2PN-CD-P1	Load Capacity (Kgf)	14
CXC6030-S2PN-CD-P1	Missed Step (µm)	1
CXC6030-S2PN-CD-P1	Parallelism (µm)	20
CXC6030-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXC6030-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC6030-S2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6030-S2PN-CD-P1	Brand / Model	SANYO / SH5281-7211
CXC6030-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC6030-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6030-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6030-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6030-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC6030-S2PN-CD-P1	Limit Sensor	N / A
CXC6030-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC6030-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC6030-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6030-F2PN-CD-P1	Table Size (mm)	60 × 60
CXC6030-F2PN-CD-P1	Travel Stroke (mm)	30
CXC6030-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 2 mm
CXC6030-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC6030-F2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6030-F2PN-CD-P1	Main Unit Weight (Kg)	1.29
CXC6030-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC6030-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC6030-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC6030-F2PN-CD-P1	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC6030-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	40
CXC6030-F2PN-CD-P1	Positioning Presion (µm)	5
CXC6030-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC6030-F2PN-CD-P1	Load Capacity (Kgf)	14
CXC6030-F2PN-CD-P1	Missed Step (µm)	1
CXC6030-F2PN-CD-P1	Parallelism (µm)	20
CXC6030-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXC6030-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC6030-F2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6030-F2PN-CD-P1	Brand / Model	SANYO / SH5281-7211
CXC6030-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC6030-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6030-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6030-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6030-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC6030-F2PN-CD-P1	Limit Sensor	N / A
CXC6030-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC6030-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC6030-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6030-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC6030-S2PN-CD-P2	Travel Stroke (mm)	30
CXC6030-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 1 mm
CXC6030-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC6030-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6030-S2PN-CD-P2	Main Unit Weight (Kg)	1.29
CXC6030-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC6030-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC6030-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC6030-S2PN-CD-P2	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC6030-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	20
CXC6030-S2PN-CD-P2	Positioning Presion (µm)	5
CXC6030-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC6030-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC6030-S2PN-CD-P2	Missed Step (µm)	1
CXC6030-S2PN-CD-P2	Parallelism (µm)	20
CXC6030-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXC6030-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC6030-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6030-S2PN-CD-P2	Brand / Model	SANYO / SH5281-7211
CXC6030-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC6030-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6030-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6030-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6030-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC6030-S2PN-CD-P2	Limit Sensor	N / A
CXC6030-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC6030-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC6030-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6030-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC6030-F2PN-CD-P2	Travel Stroke (mm)	30
CXC6030-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC6030-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC6030-F2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6030-F2PN-CD-P2	Main Unit Weight (Kg)	1.29
CXC6030-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC6030-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC6030-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC6030-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC6030-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC6030-F2PN-CD-P2	Positioning Presion (µm)	5
CXC6030-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC6030-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC6030-F2PN-CD-P2	Missed Step (µm)	1
CXC6030-F2PN-CD-P2	Parallelism (µm)	20
CXC6030-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXC6030-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC6030-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6030-F2PN-CD-P2	Brand / Model	SANYO / SH5281-7211
CXC6030-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC6030-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6030-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6030-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6030-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC6030-F2PN-CD-P2	Limit Sensor	N / A
CXC6030-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC6030-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC6030-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6050-S2PN-CD-P1	Table Size (mm)	60 × 60
CXC6050-S2PN-CD-P1	Travel Stroke (mm)	50
CXC6050-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC6050-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC6050-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6050-S2PN-CD-P1	Main Unit Weight (Kg)	1.33
CXC6050-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC6050-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC6050-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC6050-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC6050-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC6050-S2PN-CD-P1	Positioning Presion (µm)	5
CXC6050-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC6050-S2PN-CD-P1	Load Capacity (Kgf)	14
CXC6050-S2PN-CD-P1	Missed Step (µm)	1
CXC6050-S2PN-CD-P1	Parallelism (µm)	20
CXC6050-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXC6050-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC6050-S2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6050-S2PN-CD-P1	Brand / Model	SANYO / SH5281-7211
CXC6050-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC6050-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6050-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6050-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6050-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC6050-S2PN-CD-P1	Limit Sensor	N / A
CXC6050-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC6050-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC6050-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6050-F2PN-CD-P1	Table Size (mm)	60 × 60
CXC6050-F2PN-CD-P1	Travel Stroke (mm)	50
CXC6050-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 2 mm
CXC6050-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC6050-F2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6050-F2PN-CD-P1	Main Unit Weight (Kg)	1.33
CXC6050-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC6050-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC6050-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC6050-F2PN-CD-P1	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC6050-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	40
CXC6050-F2PN-CD-P1	Positioning Presion (µm)	5
CXC6050-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC6050-F2PN-CD-P1	Load Capacity (Kgf)	14
CXC6050-F2PN-CD-P1	Missed Step (µm)	1
CXC6050-F2PN-CD-P1	Parallelism (µm)	20
CXC6050-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXC6050-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC6050-F2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6050-F2PN-CD-P1	Brand / Model	SANYO / SH5281-7211
CXC6050-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC6050-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6050-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6050-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6050-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC6050-F2PN-CD-P1	Limit Sensor	N / A
CXC6050-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC6050-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC6050-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6050-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC6050-S2PN-CD-P2	Travel Stroke (mm)	50
CXC6050-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 1 mm
CXC6050-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC6050-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6050-S2PN-CD-P2	Main Unit Weight (Kg)	1.33
CXC6050-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC6050-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC6050-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC6050-S2PN-CD-P2	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC6050-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	20
CXC6050-S2PN-CD-P2	Positioning Presion (µm)	5
CXC6050-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC6050-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC6050-S2PN-CD-P2	Missed Step (µm)	1
CXC6050-S2PN-CD-P2	Parallelism (µm)	20
CXC6050-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXC6050-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC6050-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6050-S2PN-CD-P2	Brand / Model	SANYO / SH5281-7211
CXC6050-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC6050-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6050-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6050-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6050-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC6050-S2PN-CD-P2	Limit Sensor	N / A
CXC6050-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC6050-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC6050-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6050-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC6050-F2PN-CD-P2	Travel Stroke (mm)	50
CXC6050-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC6050-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC6050-F2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6050-F2PN-CD-P2	Main Unit Weight (Kg)	1.33
CXC6050-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC6050-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC6050-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC6050-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC6050-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC6050-F2PN-CD-P2	Positioning Presion (µm)	5
CXC6050-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC6050-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC6050-F2PN-CD-P2	Missed Step (µm)	1
CXC6050-F2PN-CD-P2	Parallelism (µm)	20
CXC6050-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXC6050-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC6050-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6050-F2PN-CD-P2	Brand / Model	SANYO / SH5281-7211
CXC6050-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC6050-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6050-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6050-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6050-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC6050-F2PN-CD-P2	Limit Sensor	N / A
CXC6050-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC6050-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC6050-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6075-S2PN-CD-P1	Table Size (mm)	60 × 60
CXC6075-S2PN-CD-P1	Travel Stroke (mm)	75
CXC6075-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC6075-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC6075-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6075-S2PN-CD-P1	Main Unit Weight (Kg)	1.44
CXC6075-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC6075-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC6075-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC6075-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC6075-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC6075-S2PN-CD-P1	Positioning Presion (µm)	7
CXC6075-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC6075-S2PN-CD-P1	Load Capacity (Kgf)	14
CXC6075-S2PN-CD-P1	Missed Step (µm)	1
CXC6075-S2PN-CD-P1	Parallelism (µm)	20
CXC6075-S2PN-CD-P1	Dynamic Straightness (µm)	2
CXC6075-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC6075-S2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6075-S2PN-CD-P1	Brand / Model	SANYO / SH5281-7211
CXC6075-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC6075-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6075-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6075-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6075-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC6075-S2PN-CD-P1	Limit Sensor	N / A
CXC6075-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC6075-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC6075-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6075-F2PN-CD-P1	Table Size (mm)	60 × 60
CXC6075-F2PN-CD-P1	Travel Stroke (mm)	75
CXC6075-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 2 mm
CXC6075-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC6075-F2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6075-F2PN-CD-P1	Main Unit Weight (Kg)	1.44
CXC6075-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC6075-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC6075-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC6075-F2PN-CD-P1	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC6075-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	40
CXC6075-F2PN-CD-P1	Positioning Presion (µm)	7
CXC6075-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC6075-F2PN-CD-P1	Load Capacity (Kgf)	14
CXC6075-F2PN-CD-P1	Missed Step (µm)	1
CXC6075-F2PN-CD-P1	Parallelism (µm)	20
CXC6075-F2PN-CD-P1	Dynamic Straightness (µm)	2
CXC6075-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC6075-F2PN-CD-P1	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6075-F2PN-CD-P1	Brand / Model	SANYO / SH5281-7211
CXC6075-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC6075-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6075-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6075-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6075-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor
CXC6075-F2PN-CD-P1	Limit Sensor	N / A
CXC6075-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC6075-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC6075-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6075-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC6075-S2PN-CD-P2	Travel Stroke (mm)	75
CXC6075-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 1 mm
CXC6075-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC6075-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6075-S2PN-CD-P2	Main Unit Weight (Kg)	1.44
CXC6075-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC6075-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC6075-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC6075-S2PN-CD-P2	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC6075-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	20
CXC6075-S2PN-CD-P2	Positioning Presion (µm)	7
CXC6075-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC6075-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC6075-S2PN-CD-P2	Missed Step (µm)	1
CXC6075-S2PN-CD-P2	Parallelism (µm)	20
CXC6075-S2PN-CD-P2	Dynamic Straightness (µm)	2
CXC6075-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC6075-S2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6075-S2PN-CD-P2	Brand / Model	SANYO / SH5281-7211
CXC6075-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC6075-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6075-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6075-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6075-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC6075-S2PN-CD-P2	Limit Sensor	N / A
CXC6075-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC6075-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC6075-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC6075-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC6075-F2PN-CD-P2	Travel Stroke (mm)	75
CXC6075-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC6075-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC6075-F2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating; F：Carbon Steel / Nickel Plating
CXC6075-F2PN-CD-P2	Main Unit Weight (Kg)	1.44
CXC6075-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC6075-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC6075-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC6075-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC6075-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC6075-F2PN-CD-P2	Positioning Presion (µm)	7
CXC6075-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC6075-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC6075-F2PN-CD-P2	Missed Step (µm)	1
CXC6075-F2PN-CD-P2	Parallelism (µm)	20
CXC6075-F2PN-CD-P2	Dynamic Straightness (µm)	2
CXC6075-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC6075-F2PN-CD-P2	Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC6075-F2PN-CD-P2	Brand / Model	SANYO / SH5281-7211
CXC6075-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC6075-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC6075-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC6075-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC6075-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor
CXC6075-F2PN-CD-P2	Limit Sensor	N / A
CXC6075-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC6075-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC6075-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)

Model No.	Specification	Value
CXC60100-S2PN-CD-P1	Table Size (mm)	60 × 60
CXC60100-S2PN-CD-P1	Travel Stroke (mm)	100
CXC60100-S2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC60100-S2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC60100-S2PN-CD-P1	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60100-S2PN-CD-P1	Main Unit Weight (Kg)	1.61
CXC60100-S2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC60100-S2PN-CD-P1	Accuracy Level	P：Precision grade
CXC60100-S2PN-CD-P1	Wiring Method	N：GMT Standard
CXC60100-S2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC60100-S2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC60100-S2PN-CD-P1	Positioning Presion (µm)	10
CXC60100-S2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC60100-S2PN-CD-P1	Load Capacity (Kgf)	14
CXC60100-S2PN-CD-P1	Missed Step (µm)	1
CXC60100-S2PN-CD-P1	Parallelism (µm)	20
CXC60100-S2PN-CD-P1	Dynamic Straightness (µm)	4
CXC60100-S2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC60100-S2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60100-S2PN-CD-P1	Motor Brand / Model	SANYO / SH5285-7211
CXC60100-S2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC60100-S2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60100-S2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60100-S2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60100-S2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC60100-S2PN-CD-P1	Power Voltage	24V ± 10%
CXC60100-S2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC60100-S2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60100-F2PN-CD-P1	Table Size (mm)	60 × 60
CXC60100-F2PN-CD-P1	Travel Stroke (mm)	100
CXC60100-F2PN-CD-P1	Drive Type	Ball screw Ø8, lead 1 mm
CXC60100-F2PN-CD-P1	Rail	Circular Linear Ball Guiding
CXC60100-F2PN-CD-P1	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60100-F2PN-CD-P1	Main Unit Weight (Kg)	1.61
CXC60100-F2PN-CD-P1	Coupling	FAMCS11.6-5*5
CXC60100-F2PN-CD-P1	Accuracy Level	P：Precision grade
CXC60100-F2PN-CD-P1	Wiring Method	N：GMT Standard
CXC60100-F2PN-CD-P1	Resolution (Pulse) (µm)	2 (Full) / 1 (Half)
CXC60100-F2PN-CD-P1	Max. Speed (Full Step) (mm / sec)	20
CXC60100-F2PN-CD-P1	Positioning Presion (µm)	10
CXC60100-F2PN-CD-P1	Repeatability Precision (µm)	±0.5
CXC60100-F2PN-CD-P1	Load Capacity (Kgf)	14
CXC60100-F2PN-CD-P1	Missed Step (µm)	1
CXC60100-F2PN-CD-P1	Parallelism (µm)	20
CXC60100-F2PN-CD-P1	Dynamic Straightness (µm)	4
CXC60100-F2PN-CD-P1	Dynamic Parallelism (µm)	10
CXC60100-F2PN-CD-P1	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60100-F2PN-CD-P1	Motor Brand / Model	SANYO / SH5285-7211
CXC60100-F2PN-CD-P1	Driver Brand / Model	Please refer to reference table
CXC60100-F2PN-CD-P1	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60100-F2PN-CD-P1	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60100-F2PN-CD-P1	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60100-F2PN-CD-P1	Limit Sensor	Origin Approximation Sensor / N / A
CXC60100-F2PN-CD-P1	Power Voltage	24V ± 10%
CXC60100-F2PN-CD-P1	Control Output	NPN open collector output under 24V 8mA
CXC60100-F2PN-CD-P1	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60100-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC60100-S2PN-CD-P2	Travel Stroke (mm)	100
CXC60100-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60100-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60100-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60100-S2PN-CD-P2	Main Unit Weight (Kg)	1.61
CXC60100-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60100-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60100-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60100-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60100-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60100-S2PN-CD-P2	Positioning Presion (µm)	10
CXC60100-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60100-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC60100-S2PN-CD-P2	Missed Step (µm)	1
CXC60100-S2PN-CD-P2	Parallelism (µm)	20
CXC60100-S2PN-CD-P2	Dynamic Straightness (µm)	4
CXC60100-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC60100-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60100-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60100-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60100-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60100-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60100-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60100-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60100-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC60100-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60100-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60100-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC60100-F2PN-CD-P2	Travel Stroke (mm)	100
CXC60100-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60100-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60100-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60100-F2PN-CD-P2	Main Unit Weight (Kg)	1.61
CXC60100-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60100-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60100-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60100-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60100-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60100-F2PN-CD-P2	Positioning Presion (µm)	10
CXC60100-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60100-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC60100-F2PN-CD-P2	Missed Step (µm)	1
CXC60100-F2PN-CD-P2	Parallelism (µm)	20
CXC60100-F2PN-CD-P2	Dynamic Straightness (µm)	4
CXC60100-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC60100-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60100-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60100-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60100-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60100-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60100-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60100-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60100-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC60100-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60100-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60150-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC60150-S2PN-CD-P2	Travel Stroke (mm)	150
CXC60150-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60150-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60150-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60150-S2PN-CD-P2	Main Unit Weight (Kg)	1.94
CXC60150-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60150-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60150-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60150-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60150-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60150-S2PN-CD-P2	Positioning Presion (µm)	15
CXC60150-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60150-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC60150-S2PN-CD-P2	Missed Step (µm)	1
CXC60150-S2PN-CD-P2	Parallelism (µm)	20
CXC60150-S2PN-CD-P2	Dynamic Straightness (µm)	4
CXC60150-S2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC60150-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60150-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60150-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60150-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60150-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60150-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60150-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60150-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC60150-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60150-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60150-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC60150-F2PN-CD-P2	Travel Stroke (mm)	150
CXC60150-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60150-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60150-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60150-F2PN-CD-P2	Main Unit Weight (Kg)	1.94
CXC60150-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60150-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60150-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60150-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60150-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60150-F2PN-CD-P2	Positioning Presion (µm)	15
CXC60150-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60150-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC60150-F2PN-CD-P2	Missed Step (µm)	1
CXC60150-F2PN-CD-P2	Parallelism (µm)	20
CXC60150-F2PN-CD-P2	Dynamic Straightness (µm)	4
CXC60150-F2PN-CD-P2	Dynamic Parallelism (µm)	10
CXC60150-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60150-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60150-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60150-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60150-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60150-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60150-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60150-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC60150-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60150-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60150-S2PN-CD-P4	Table Size (mm)	60 × 60
CXC60150-S2PN-CD-P4	Travel Stroke (mm)	150
CXC60150-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60150-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60150-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60150-S2PN-CD-P4	Main Unit Weight (Kg)	1.94
CXC60150-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60150-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60150-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60150-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60150-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60150-S2PN-CD-P4	Positioning Presion (µm)	15
CXC60150-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60150-S2PN-CD-P4	Load Capacity (Kgf)	14
CXC60150-S2PN-CD-P4	Missed Step (µm)	1
CXC60150-S2PN-CD-P4	Parallelism (µm)	20
CXC60150-S2PN-CD-P4	Dynamic Straightness (µm)	4
CXC60150-S2PN-CD-P4	Dynamic Parallelism (µm)	10
CXC60150-S2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60150-S2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60150-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60150-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60150-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60150-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60150-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60150-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC60150-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60150-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60150-F2PN-CD-P4	Table Size (mm)	60 × 60
CXC60150-F2PN-CD-P4	Travel Stroke (mm)	150
CXC60150-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60150-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60150-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60150-F2PN-CD-P4	Main Unit Weight (Kg)	1.94
CXC60150-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60150-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60150-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60150-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60150-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60150-F2PN-CD-P4	Positioning Presion (µm)	15
CXC60150-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60150-F2PN-CD-P4	Load Capacity (Kgf)	14
CXC60150-F2PN-CD-P4	Missed Step (µm)	1
CXC60150-F2PN-CD-P4	Parallelism (µm)	20
CXC60150-F2PN-CD-P4	Dynamic Straightness (µm)	4
CXC60150-F2PN-CD-P4	Dynamic Parallelism (µm)	10
CXC60150-F2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60150-F2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60150-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60150-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60150-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60150-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60150-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60150-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC60150-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60150-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60200-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC60200-S2PN-CD-P2	Travel Stroke (mm)	200
CXC60200-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60200-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60200-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60200-S2PN-CD-P2	Main Unit Weight (Kg)	2.14
CXC60200-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60200-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60200-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60200-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60200-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60200-S2PN-CD-P2	Positioning Presion (µm)	15
CXC60200-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60200-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC60200-S2PN-CD-P2	Missed Step (µm)	1
CXC60200-S2PN-CD-P2	Parallelism (µm)	20
CXC60200-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXC60200-S2PN-CD-P2	Dynamic Parallelism (µm)	15
CXC60200-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60200-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60200-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60200-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60200-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60200-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60200-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60200-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC60200-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60200-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60200-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC60200-F2PN-CD-P2	Travel Stroke (mm)	200
CXC60200-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60200-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60200-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60200-F2PN-CD-P2	Main Unit Weight (Kg)	2.14
CXC60200-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60200-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60200-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60200-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60200-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60200-F2PN-CD-P2	Positioning Presion (µm)	15
CXC60200-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60200-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC60200-F2PN-CD-P2	Missed Step (µm)	1
CXC60200-F2PN-CD-P2	Parallelism (µm)	20
CXC60200-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXC60200-F2PN-CD-P2	Dynamic Parallelism (µm)	15
CXC60200-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60200-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60200-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60200-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60200-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60200-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60200-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60200-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC60200-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60200-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60200-S2PN-CD-P4	Table Size (mm)	60 × 60
CXC60200-S2PN-CD-P4	Travel Stroke (mm)	200
CXC60200-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60200-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60200-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60200-S2PN-CD-P4	Main Unit Weight (Kg)	2.14
CXC60200-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60200-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60200-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60200-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60200-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60200-S2PN-CD-P4	Positioning Presion (µm)	15
CXC60200-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60200-S2PN-CD-P4	Load Capacity (Kgf)	14
CXC60200-S2PN-CD-P4	Missed Step (µm)	1
CXC60200-S2PN-CD-P4	Parallelism (µm)	20
CXC60200-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXC60200-S2PN-CD-P4	Dynamic Parallelism (µm)	15
CXC60200-S2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60200-S2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60200-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60200-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60200-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60200-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60200-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60200-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC60200-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60200-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60200-F2PN-CD-P4	Table Size (mm)	60 × 60
CXC60200-F2PN-CD-P4	Travel Stroke (mm)	200
CXC60200-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60200-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60200-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60200-F2PN-CD-P4	Main Unit Weight (Kg)	2.14
CXC60200-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60200-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60200-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60200-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60200-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60200-F2PN-CD-P4	Positioning Presion (µm)	15
CXC60200-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60200-F2PN-CD-P4	Load Capacity (Kgf)	14
CXC60200-F2PN-CD-P4	Missed Step (µm)	1
CXC60200-F2PN-CD-P4	Parallelism (µm)	20
CXC60200-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXC60200-F2PN-CD-P4	Dynamic Parallelism (µm)	15
CXC60200-F2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60200-F2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60200-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60200-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60200-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60200-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60200-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60200-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC60200-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60200-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)

Model No.	Specification	Value
CXC60250-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC60250-S2PN-CD-P2	Travel Stroke (mm)	250
CXC60250-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60250-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60250-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60250-S2PN-CD-P2	Main Unit Weight (Kg)	2.44
CXC60250-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60250-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60250-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60250-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60250-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60250-S2PN-CD-P2	Positioning Presion (µm)	25
CXC60250-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60250-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC60250-S2PN-CD-P2	Missed Step (µm)	1
CXC60250-S2PN-CD-P2	Parallelism (µm)	20
CXC60250-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXC60250-S2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC60250-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60250-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60250-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60250-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60250-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60250-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60250-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60250-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC60250-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60250-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60250-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC60250-F2PN-CD-P2	Travel Stroke (mm)	250
CXC60250-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60250-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60250-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60250-F2PN-CD-P2	Main Unit Weight (Kg)	2.44
CXC60250-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60250-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60250-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60250-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60250-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60250-F2PN-CD-P2	Positioning Presion (µm)	25
CXC60250-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60250-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC60250-F2PN-CD-P2	Missed Step (µm)	1
CXC60250-F2PN-CD-P2	Parallelism (µm)	20
CXC60250-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXC60250-F2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC60250-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60250-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60250-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60250-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60250-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60250-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60250-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60250-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC60250-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60250-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60250-S2PN-CD-P4	Table Size (mm)	60 × 60
CXC60250-S2PN-CD-P4	Travel Stroke (mm)	250
CXC60250-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60250-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60250-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60250-S2PN-CD-P4	Main Unit Weight (Kg)	2.44
CXC60250-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60250-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60250-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60250-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60250-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60250-S2PN-CD-P4	Positioning Presion (µm)	25
CXC60250-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60250-S2PN-CD-P4	Load Capacity (Kgf)	14
CXC60250-S2PN-CD-P4	Missed Step (µm)	1
CXC60250-S2PN-CD-P4	Parallelism (µm)	20
CXC60250-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXC60250-S2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC60250-S2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60250-S2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60250-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60250-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60250-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60250-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60250-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60250-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC60250-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60250-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60250-F2PN-CD-P4	Table Size (mm)	60 × 60
CXC60250-F2PN-CD-P4	Travel Stroke (mm)	250
CXC60250-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60250-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60250-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60250-F2PN-CD-P4	Main Unit Weight (Kg)	2.44
CXC60250-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60250-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60250-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60250-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60250-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60250-F2PN-CD-P4	Positioning Presion (µm)	25
CXC60250-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60250-F2PN-CD-P4	Load Capacity (Kgf)	14
CXC60250-F2PN-CD-P4	Missed Step (µm)	1
CXC60250-F2PN-CD-P4	Parallelism (µm)	20
CXC60250-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXC60250-F2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC60250-F2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60250-F2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60250-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60250-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60250-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60250-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60250-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60250-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC60250-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60250-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60300-S2PN-CD-P2	Table Size (mm)	60 × 60
CXC60300-S2PN-CD-P2	Travel Stroke (mm)	300
CXC60300-S2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60300-S2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60300-S2PN-CD-P2	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60300-S2PN-CD-P2	Main Unit Weight (Kg)	2.74
CXC60300-S2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60300-S2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60300-S2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60300-S2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60300-S2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60300-S2PN-CD-P2	Positioning Presion (µm)	25
CXC60300-S2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60300-S2PN-CD-P2	Load Capacity (Kgf)	14
CXC60300-S2PN-CD-P2	Missed Step (µm)	1
CXC60300-S2PN-CD-P2	Parallelism (µm)	20
CXC60300-S2PN-CD-P2	Dynamic Straightness (µm)	6
CXC60300-S2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC60300-S2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60300-S2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60300-S2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60300-S2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60300-S2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60300-S2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60300-S2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60300-S2PN-CD-P2	Power Voltage	24V ± 10%
CXC60300-S2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60300-S2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60300-F2PN-CD-P2	Table Size (mm)	60 × 60
CXC60300-F2PN-CD-P2	Travel Stroke (mm)	300
CXC60300-F2PN-CD-P2	Drive Type	Ball screw Ø8, lead 2 mm
CXC60300-F2PN-CD-P2	Rail	Circular Linear Ball Guiding
CXC60300-F2PN-CD-P2	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60300-F2PN-CD-P2	Main Unit Weight (Kg)	2.74
CXC60300-F2PN-CD-P2	Coupling	FAMCS11.6-5*5
CXC60300-F2PN-CD-P2	Accuracy Level	P：Precision grade
CXC60300-F2PN-CD-P2	Wiring Method	N：GMT Standard
CXC60300-F2PN-CD-P2	Resolution (Pulse) (µm)	4 (Full) / 2 (Half)
CXC60300-F2PN-CD-P2	Max. Speed (Full Step) (mm / sec)	40
CXC60300-F2PN-CD-P2	Positioning Presion (µm)	25
CXC60300-F2PN-CD-P2	Repeatability Precision (µm)	±0.5
CXC60300-F2PN-CD-P2	Load Capacity (Kgf)	14
CXC60300-F2PN-CD-P2	Missed Step (µm)	1
CXC60300-F2PN-CD-P2	Parallelism (µm)	20
CXC60300-F2PN-CD-P2	Dynamic Straightness (µm)	6
CXC60300-F2PN-CD-P2	Dynamic Parallelism (µm)	25
CXC60300-F2PN-CD-P2	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60300-F2PN-CD-P2	Motor Brand / Model	SANYO / SH5285-7211
CXC60300-F2PN-CD-P2	Driver Brand / Model	Please refer to reference table
CXC60300-F2PN-CD-P2	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60300-F2PN-CD-P2	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60300-F2PN-CD-P2	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60300-F2PN-CD-P2	Limit Sensor	Origin Approximation Sensor / N / A
CXC60300-F2PN-CD-P2	Power Voltage	24V ± 10%
CXC60300-F2PN-CD-P2	Control Output	NPN open collector output under 24V 8mA
CXC60300-F2PN-CD-P2	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60300-S2PN-CD-P4	Table Size (mm)	60 × 60
CXC60300-S2PN-CD-P4	Travel Stroke (mm)	300
CXC60300-S2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60300-S2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60300-S2PN-CD-P4	Stage Material / Surface Treatment	S：Stainless Steel / Nickel Plating
CXC60300-S2PN-CD-P4	Main Unit Weight (Kg)	2.74
CXC60300-S2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60300-S2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60300-S2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60300-S2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60300-S2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60300-S2PN-CD-P4	Positioning Presion (µm)	25
CXC60300-S2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60300-S2PN-CD-P4	Load Capacity (Kgf)	14
CXC60300-S2PN-CD-P4	Missed Step (µm)	1
CXC60300-S2PN-CD-P4	Parallelism (µm)	20
CXC60300-S2PN-CD-P4	Dynamic Straightness (µm)	6
CXC60300-S2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC60300-S2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60300-S2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60300-S2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60300-S2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60300-S2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60300-S2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60300-S2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60300-S2PN-CD-P4	Power Voltage	24V ± 10%
CXC60300-S2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60300-S2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)
CXC60300-F2PN-CD-P4	Table Size (mm)	60 × 60
CXC60300-F2PN-CD-P4	Travel Stroke (mm)	300
CXC60300-F2PN-CD-P4	Drive Type	Ball screw Ø8, lead 4 mm
CXC60300-F2PN-CD-P4	Rail	Circular Linear Ball Guiding
CXC60300-F2PN-CD-P4	Stage Material / Surface Treatment	F：Carbon Steel / Nickel Plating
CXC60300-F2PN-CD-P4	Main Unit Weight (Kg)	2.74
CXC60300-F2PN-CD-P4	Coupling	FAMCS11.6-5*5
CXC60300-F2PN-CD-P4	Accuracy Level	P：Precision grade
CXC60300-F2PN-CD-P4	Wiring Method	N：GMT Standard
CXC60300-F2PN-CD-P4	Resolution (Pulse) (µm)	8 (Full) / 4 (Half)
CXC60300-F2PN-CD-P4	Max. Speed (Full Step) (mm / sec)	80
CXC60300-F2PN-CD-P4	Positioning Presion (µm)	25
CXC60300-F2PN-CD-P4	Repeatability Precision (µm)	±0.5
CXC60300-F2PN-CD-P4	Load Capacity (Kgf)	14
CXC60300-F2PN-CD-P4	Missed Step (µm)	1
CXC60300-F2PN-CD-P4	Parallelism (µm)	20
CXC60300-F2PN-CD-P4	Dynamic Straightness (µm)	6
CXC60300-F2PN-CD-P4	Dynamic Parallelism (µm)	25
CXC60300-F2PN-CD-P4	Motor Type / Shaft Numbers	5-phase stepper / ☐ 28 double shafts
CXC60300-F2PN-CD-P4	Motor Brand / Model	SANYO / SH5285-7211
CXC60300-F2PN-CD-P4	Driver Brand / Model	Please refer to reference table
CXC60300-F2PN-CD-P4	Stage Side Connector	15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
CXC60300-F2PN-CD-P4	Controller Side Connector	15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
CXC60300-F2PN-CD-P4	Origin Sensor	Photoelectric sensor GMT-sensor
CXC60300-F2PN-CD-P4	Limit Sensor	Origin Approximation Sensor / N / A
CXC60300-F2PN-CD-P4	Power Voltage	24V ± 10%
CXC60300-F2PN-CD-P4	Control Output	NPN open collector output under 24V 8mA
CXC60300-F2PN-CD-P4	Output Control	Testing (sensing)：output transistor OFF (closed)

System Configuration Diagram

♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.

♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

Vertical movement direction is Z axis.

Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

Green arrows present the specified axis movement direction.

Inquiry - CXC60 - Precision

Name*

Email*

Contact Number*

Message (optional)