Share:
★ Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Aluminum Alloy
|
Model No. |
Specification |
Value |
|---|---|---|
|
AXZ40-A2PL-CD |
Table Size (mm) |
40 × 40 |
|
AXZ40-A2PL-CD |
Travel Stroke (mm) |
15 |
|
AXZ40-A2PL-CD |
Drive Type |
Ball screw Ø6, lead 1mm |
|
AXZ40-A2PL-CD |
Rail |
Anti-creep Crossed-roller Guiding |
|
AXZ40-A2PL-CD |
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized |
|
AXZ40-A2PL-CD |
Main Unit Weight (Kg) |
0.82 |
|
AXZ40-A2PL-CD |
Coupling |
FAMMS12-3*5 |
|
AXZ40-A2PL-CD |
Accuracy Level |
P：Precision grade |
|
AXZ40-A2PL-CD |
Wiring Method |
L：Left Wiring / R：Right Wiring |
|
AXZ40-A2PL-CD |
Resolution (Pulse) (µm) |
2 (Full) |
|
AXZ40-A2PL-CD |
Resolution (Pulse) (µm) |
1 (Half) |
|
AXZ40-A2PL-CD |
Max. Speed (Full Step) (mm / sec) |
10 |
|
AXZ40-A2PL-CD |
Positioning Presion (µm) |
5 |
|
AXZ40-A2PL-CD |
Repeatability Precision (µm) |
±0.5 |
|
AXZ40-A2PL-CD |
Load Capacity (Kgf) |
4 |
|
AXZ40-A2PL-CD |
Missed Step (µm) |
1 |
|
AXZ40-A2PL-CD |
Parallelism (µm) |
20 |
|
AXZ40-A2PL-CD |
Dynamic Straightness (µm) |
2 |
|
AXZ40-A2PL-CD |
Dynamic Parallelism (µm) |
6.6 |
|
AXZ40-A2PL-CD |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
AXZ40-A2PL-CD |
Brand / Model |
SANYO / SH5281-7211 |
|
AXZ40-A2PL-CD |
Driver Brand / Model |
Please refer to reference table |
|
AXZ40-A2PL-CD |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
AXZ40-A2PL-CD |
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|
AXZ40-A2PL-CD |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
AXZ40-A2PL-CD |
Limit Sensor |
Origin Approximation Sensor |
|
AXZ40-A2PL-CD |
Limit Sensor |
N / A |
|
AXZ40-A2PL-CD |
Power Voltage |
24V ± 10% |
|
AXZ40-A2PL-CD |
Control Output |
NPN open collector output under 24V 8mA |
|
AXZ40-A2PL-CD |
Output Control |
Testing (sensing)：output transistor OFF (closed) |
|
System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
|
Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Inquiry - AXZ40 - Precision
