Product outline
■ Torque, rotation speed and power are displayed simultaneously.
■ Hold function (Sample, Peak, Valley, P-P, Average)
■ Upper/lower comparators function (ALM HI, HI, OK, LO, ALM LO)
■ Equipped with data memory function (Torque, rotation speed, power, the latest 30 items are recorded)
■ The unit supplies electric power to UTMⅡ/UTMV/UTMⅢ.
*1 RS-485 interface
*2 Power(W) = 2πxTorque(Nm)xRotation speed(rpm)/60
Specifications
Sensor input for torque|Pulse input for rotation speed|Display section|External I/O section|General performance|Attachments
Sensor input for torque (voltage input) | |
Input resistance | 1MΩ |
---|---|
Signal input range |
±10V(UTMⅢ/UTF(Option)) ±5V(UTMⅡ/UTMV) |
Accuracy |
Non-linearity : Within 0.02%/FS±1digit Zero drift : Within 0.2mV/℃ RTI Gain drift : Within 0.01%/℃ |
A/D converter |
・ Speed…16000 times/sec. ・ Resolution…24bit (binary) Approx. 1/30000 with respect to 10V |
Digital low pass filter | PASS, 3 to 1kHz. |
Voltage output | Input voltage cuff (For test point) |
Pulse input for rotation speed (Open collector) | |
Maximum input frequency | Based on UTMⅡ/UTMV/UTMⅢ |
---|---|
Minimum input frequency |
Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr) Select from 60, 40, 20, 12, 8 rpm (when pulse rate is 1 ppr) |
Minimum detection pulse width | 50μs |
Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic=Approx. 10mA) |
Pulse input for rotation speed(Line driver compliant with RS-422A)(UTF(Opution)) | |
Maximum input frequency | Based on UTF |
Circuit configuration | Line driver compliant with RS-422A |
Display section | |
Display |
Main display : Character height 15mm Numerical display by 7-segment green LED (5-digit+sign) Sub display : Character height 8mm Numerical display by 7-segment green LED (5-digit) |
---|---|
Indicated value |
Main display : 5-digit -99999 to +99999 Signs : Minus sign on most significant digit Sub display : 5-digit -19999 to +99999 Signs : Minus sign on most significant digit |
Decimal point | 0, 0.0, 0.00, 0.000 (Only a torque and a power. Rotation speed is nothing) |
Display frequency | Selectable from 3, 6, 13, and 25 times/sec. |
Status display | HI / LO / HOLD |
Hold |
Sample, Peak, Valley, P-P, Average Hold section setting (All section・External signal・External signal+Time・Level+Time) |
External I/O section | |
External input (4) |
Hold control / Hold reset / Digital Zero / Record data clear Dry contact input circuit (minus common type), Ic=10mA or less |
---|---|
External output (13) |
HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) / Hold complete / RUN Timing output/ Absolute value display Open collector output circuit (sink type), Vceo=30V (max) Ic=30mA (max) |
Interface |
SIF : 2-wire serial interface 485 : RS-485 interface (Specifically for UTMⅢ/UTF) BCO : BCD parallel data output interface (Option) 232 : RS-232C communication interface (Option) D3V : D/A converter voltage output(3ch) (Option) DAV : D/A converter voltage output (Option) DAI : D/A converter current output (Option) USB : USB interface (Option) * Only one option can be installed. |
General performance | |
Power supply voltage | ±DC24V |
---|---|
Power consumption | 8W typ. |
Operating conditions |
Operation : -10 to +50℃ Storage-40 to +80℃ Humidity : 85%RH or less(non-condensing) |
Dimensions | 96(W)×96(H)×138(D) mm (Projections excluded) |
Panel cutout size | 92×92(+1-0)mm |
Weight | Approx. 1.2kg |
CE marking certification | EMC directives EN61326-1 |
Attachments | |
Operation manual・・・・・・1 External input/output connector・・・・・・1 Unit seal・・・・・・1 Connector for BCD output (with BCD output option)・・・・・・1 Operating tool (with D/A converter(3ch) option)・・・・・・1 Mini screwdriver (with D/A converter option)・・・・・・1 Ferrite core・・・・・・1 |
Compatible torque meter
Sign | Specification |
Standard |
UTMⅢ/UTMⅡ/UTMV *Cannot be connected simultaneously. |
---|---|
UTF |
UTF (Optional specification) *UTMⅢ/UTMⅡ/UTMV cannot be connected. |
Optional accessories
Model | Description |
CA372-I/O | Cable with FCN connector at one-end 3m |
---|---|
CA81-USB | miniUSB-computer USB cable 1.8m |
CATM321-M | Cable for UTMⅢ/UTF connection 2m |
CATM351-M | Cable for UTMⅡ/UTMV connection 5m |
CATF-COM-2M-M | Communication cable for UTF 2m |
CATF-COM-5M-M | Communication cable for UTF 5m |
CATM21-M | Cable for UTMⅡ/UTMV connection 2m |
CATM51-M | Cable for UTMⅡ/UTMV connection 5m |
CN34 | D-Sub9p connector for RS-232C |
CN50 | FCN series I/O connector (with cover) |
CN51 | BCD output connector |
CN55 | FCN series I/O connector (with diagonal cover) |
CN73 | D/A converter(3ch) connector |
CN90 | Waterproof plastic connector for UTMⅡ/UTMV connection |
DTC2A | Case for TM320 |
GMP96x96 | Rubber packing |
E04SR211132 | Ferrite core |
TSU03 | Lightning surge protector (DC) |
Download
Product catalogue(PDF)
|
TM320 catalogue(1 MB) |
---|
Inquiry - TM320 (Torque Monitor)