|
Language: EN | 中文 |

Share:


TM380 (Torque Monitor)

Quantity: In Stock

Product outline

 
■ Compatible with encoder option of UTM series
■ Equipped with display connection data of UTMⅢ/UTF and comparison function.*1
■ Torque, rotation speed and angle are displayed simultaneously.
■ Hold function
■ Upper/lower comparators function
■ Equipped with data memory function (Torque, rotation speed, angle, the latest 30 items are recorded)
■ The unit supplies electric power to UTMⅡ/UTMV/UTMⅢ.
*1 RS-485 interface
Usage example

使用例

 

Specifications

Sensor input for torque (voltage input)
Input resistance 1MΩ
Signal input range ±10V(UTMⅢ/UTF(Option))
±5V(UTMⅡ/UTMV)
Accuracy Non-linearity : Within 0.02%/FS±1digit
Zero drift : Within 0.2mV/℃ RTI
Gain drift : Within 0.01%/℃
A/D converter ・ Speed…16000 times/sec.
・ Resolution…24bit (binary) Approx. 1/30000 with respect to 10V
Digital low pass filter PASS, 3 to 1kHz.
Digital high pass filter PASS, 3 to 1kHz.
Voltage output Input voltage cuff (For test point)

 

 
Rotation speed input for high speed (Pulse input, open collector)
Maximum input frequency Based on UTMⅡ/UTMV/UTMⅢ/UTF
Minimum input frequency Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr)
Select from 60, 40, 20, 12, 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width 50μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic=Approx. 10mA)
Rotation speed input for low speed(Pulse input, open collector)
Maximum input frequency Approx. 1000rpm
Minimum input frequency 0.1rpm
Minimum detection pulse width 5μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic=Approx. 10mA)
 
Encoder input(Pulse input)
Compatible with encoder option of UTMⅡ/UTMⅢ
 
 

 

Display section
Display Main display : Character height 15mm Numerical display by 7-segment green LED (5-digit+sign)
Sub display : Character height 8mm Numerical display by 7-segment green LED (5-digit)
Indicated value Main display : 5-digit -99999 to +99999 Signs : Minus sign on most significant digit
Sub-display (Rotation speed) : 5 digit 0 to +99999
Sub-display (Angle) : -19999 to +19999 Signs : Minus sign on most significant digit
Decimal point 0, 0.0, 0.00, 0.000 (torque)
0(Rotation speed Low-speed rotation mode 0.0)
0, 0.0, 0.00(Angle Depending on unit and min. scale division setting)
Display frequency Selectable from 3, 6, 13, and 25 times/sec.
Status display HI / LO / HOLD
Unit rad/deg (Depending on angle unit setting)
Hold Sample, Peak, Valley, P-P, Average
Hold section setting (All section・External signal・External signal+Time・Level+Time)
 
External I/O section
External input
(5)
Hold control / Hold reset / Digital Zero / Angle zero clear/ Record data clear
Dry contact input circuit (minus common type), Ic=10mA or less
External output
(13)
HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) / Hold complete / RUN
Timing output/ Absolute value display
Open collector output circuit (sink type), Vceo=30V (max) Ic=30mA (max)
Interface SIF : 2-wire serial interface
485 : RS-485 interface (Specifically for UTMⅢ/UTF)
BCO : BCD parallel data output interface (Option)
232 : RS-232C communication interface (Option)
D3V : D/A converter voltage output(3ch) (Option)
DAV : D/A converter voltage output (Option)
DAI : D/A converter current output (Option)
USB : USB interface (Option)
* Only one option can be installed.
 
General performance
Power supply voltage ±DC24V
Power consumption 8W typ.
Operating conditions Operation : -10 to +50℃ Storage-40 to +80℃
Humidity : 85%RH or less(non-condensing)
Dimensions 96(W)×96(H)×138(D) mm (Projections excluded)
Panel cutout size 92×92(+1-0)mm
Weight Approx. 1.2kg
CE marking certification EMC directives EN61326-1
 
Attachments
  Operation manual・・・・・・1
External input/output connector・・・・・・1
Unit seal・・・・・・1
Connector for BCD output (with BCD output option)・・・・・・1
Operating tool (with D/A converter(3ch) option)・・・・・・1
Mini screwdriver (with D/A converter option)・・・・・・1
Ferrite core・・・・・・1
 

Compatible torque meter

対応トルクメータ

Sign Specification
Standard UTMⅢ/UTMⅡ/UTMV
*Cannot be connected simultaneously.
UTF UTF (Optional specification)
*UTMⅢ/UTMⅡ/UTMV cannot be connected.
 

Optional accessories

Model Description
CA372-I/O Cable with FCN connector at one-end 3m
CA81-USB miniUSB-computer USB cable 1.8m
CATM321-M Cable for UTMⅢ/UTF connection 2m
CATM351-M Cable for UTMⅢ/UTF connection 5m
CATF-COM-2M-M Communication cable for UTF 2m
CATF-COM-5M-M Communication cable for UTF 5m
CATM221-MC Cable for UTMⅡ/UTMV connection 2m
CATM251-MC Cable for UTMⅡ/UTMV connection 5m
CATM(R)321-M Cable for connecting UTMⅢ rotary encoder 2m
CATM(R)351-M Cable for connecting UTMⅢ rotary encoder 5m
CATM(R)321-MR Cable for connecting UTMⅡ rotary encoder 2m
CATM(R)351-MR Cable for connecting UTMⅡ rotary encoder 5m
CN34 D-Sub9p connector for RS-232C
CN50 FCN series I/O connector (with cover)
CN51 BCD output connector
CN55 FCN series I/O connector (with diagonal cover)
CN73 D/A converter(3ch) connector
CN92 UTMⅢ connector
CN93 UTMⅢ rotary encoder connector
DTC2 Case for TM380
GMP96x96 Rubber packing
E04SR211132 Ferrite core
TSU03 Lightning surge protector (DC)
 

Download

Product catalogue(PDF)
TM380 catalogue(682 KB)



 Inquiry - TM380 (Torque Monitor)