Product outline
・TC80-D3V is a compact DIN-rail mount torque converter
・High-speed sampling of 16kS / s visualizes steep torque fluctuations.
・It also supports the UTM series rotary encoder option!
・3ch analog output torque, rotation speed, and angle.
・Up to 100 saved hold values can be output as data.
Lightweight and compact body to fit into limited space in a control panel
Light weight & compact body for 35mm DIN rail mount
Application software for USB interface
With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.
Specifications
Analog section|Display section|External signal|Interface|General performance|Attachments
Analog section | |
Signal input range |
-10 to +10V (UTMⅢ/UTF Option) Input impedance: 1MΩ or more -5 to +5V (UTMⅡ/UTMV) Input impedance: 1MΩ or more |
---|---|
Accuracy |
Non-linearity: within 0.02%FS±1digit Zero drift: within 0.2mV/℃ RTI Gain drift:within 0.01%/℃ |
Digital low-pass filter |
PASS,1 to 1kHz |
A/D converter |
Rate :16000times/sec Resolution:24bit (binary) Approx. 1/30000 against 10V |
Analog monitor output (Test point / UTF Option) |
Transmitted input voltage |
Pulse input for rotation speed (open collector input/UTMⅡ/UTMV/UTMⅢ) | |
Max. rotation speed | Depend on UTMⅡ/ UTMV/ UTMⅢ |
Min. rotation speed |
Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr) Selectable from 60, 40, 20, 12, 8rpm (when pulse rate is 1 ppr) |
Min. pulse width | 50μs |
Circuit configuration |
No-voltage contact input (minus common) Connectable to open collector (Ic=Approx. 10mA) |
Rotation speed input for low speed(Pulse input, open collector) | |
Maximum input frequency | Approx. 1000rpm |
Minimum input frequency | 0.1rpm |
Minimum detection pulse width | 5μs |
Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic=Approx. 10mA) |
Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF option) |
|
Max. frequency | Depend on UTF |
Circuit configuration |
Line driver (RS-422A compliant) |
Encoder input(Pulse input) | UTMⅡ/UTMⅢ Compatible with rotary encoder option |
---|
Display section | |
Display unit |
Character height 8mm Numerical display by 7-segment green LED |
---|---|
Display content |
Switchable numeric display (torque, rotation speed, Power/ Angle) |
Display frequency | Selectable from 1, 3 , 6, 13, 25 times/sec. |
External signal | |
Output signal (2) |
Selectable/ configurable Transistor’s open collector output Vceo=30V、 Ic=50mA |
---|---|
Input signal (1) |
Selectable/ configurable Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.) Input is ON when shorted to COM terminal |
Interface | |
USB | USB Interface |
---|---|
D3V | D/A converter voltage output(3ch) |
485 | RS-485 Interface |
422 | RS-422A Interface (UTF Option) |
General performance | |
Power supply voltage |
DC24V ±15% |
---|---|
Power consumption | 6W typ. |
Operating conditions |
Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃ Humidity: 85%RH or less (non-condensing) |
Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
Weight | Approx. 230g |
CE marking certification | EMC directives EN61326-1 |
Attachments | |
Quick manual | 2 |
---|---|
Mini driver | 1 |
Various I/O connector | 3 |
Operating tool | 1 |
Download
Product catalogue(PDF)
|
TC80 catalogue(862 KB) |
---|
Inquiry - TC80-D3V (Torque Monitor)